Clutches & Parts

Allis Chalmers - D17, D19, 175, 180, 185, [D14 (SN D14-21677 & Up; 2 required per tractor)], D15 (2 required per tractor), D21 (3-Point Hitch Lever Bushing; 2 required) 2 bushings required for most applications. Replaces - 70235082, 235082,...

Allis Chalmers: B, C, CA, IB (early models with 9" diameter standard (not H.D.) clutch assembly), D10 (up to SN 3501, early models with 9" diameter standard (not H.D.) clutch assembly), D12 (up to SN 3001, early models with 9" diameter standard (not H.D...

Allis Chalmers - B (SN: 101 - 124037), C, CA (Up to SN: 30611), IB (Up to SN: 2836) Replacement for: 70207941, 207941, 70225646, 225646 Clutch Pedal return spring measures 4.300" overall length. The body diameter measures 0.750" and the wire diameter...

Allis Chalmers - D17, D19, RC, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 7000 AC Combines - EII (SN: 25001 and up), EIII, K, K2, N5, N6, N7  IH Combines - 101, 127, 141, 151, 181, [ 203, 205, 303, 503, 615, 715 (fits 'some'; check...

Allis Chalmers - D21 (Steering Shaft Support Bushing; 1 required per tractor), [D14, D15, D17, D19 (Steering Shaft Support Bushing; 2 required per tractor)], [180, 185, 190, 190XT, 190 XT III, 200, 210, 220, 220 FWA (Steering Shaft Support Bushing; 2...

Allis Chalmers - B, IB, C, CA, D10, D12, D17, D19 Includes integral spring steel clips Replaces - 70208465, 208465

Allis Chalmers - 190XT, B, C, CA (W/ 9" Clutch), D10 (Up to SN: 3500), D12, D14, D15 (Up to SN: 3000), D17 (Up to SN: 75000), D19, ED40, 180, 185, 190, 200, Crawler: H3, HD3; Combines - A, A2, C, C2, F, F2, F3, L (Up to SN: 4316), M, M2, M3; Replacement...

Allis Chalmers - D17, D19, D21, WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, [ Some: B, C, CA (for tractors using a pilot bearing, Not a bushing ) ]; Replaces: 226859, 70226859, 70573970, 73340010, 74043360, 74250341, 74253911...

Allis Chalmers - B, IB (Using 8 1/2" Clutch), D10 (SN: 3502 & up), D12 (SN: 3002 & up) D17 (up to SN 75000), RC, WC, WD, WD45; Replacement for: 70204829, 204829International - A (Fits when equipped with replaceable rotating throwout bearing), AV,...

Allis Chalmers - WD, WD45, WD45 Diesel Clutch Housing Gasket - Torque Housing to Engine Gasket - OEM AGCO Brand Replaces - 70225915, 225915

Allis Chalmers - B (SN 124037 and up),IB (SN 2836 and up), CA (SN 30611 and up), [ D10, D12 (Up to SN 9001) ]; Replaces: 70226310, 226310 0.100" wire diameter,5.573" overall length, 0.750" body diameterFor Earlier serial numbers tractors view AC-270D The...

Allis Chalmers - D10, D12, D14, D15, D17 up to SN 42000 Used As Clutch Pedal Return Spring On D21 2 Used Per Tractor Replaces - 70227700, 227700, 239262, 70239262 The Allis Chalmers Brake Pedal Return Spring is a high-quality replacement part designed...

Allis Chalmers - WC, WF Clutch shaft input seal (2 required per tractor) measures approximately 1.245" ID, 2.008" OD, 0.215" Thick Replaces - 70202086, 202086

Allis Chalmers - D14, D5 Replacement for 227610, 70227610 MAY VARY IN COLOR - PRIMERED

Allis Chalmers - G Replacement - 70800312, 800312 Clutch Pilot Bushing measures .688" ID, .875" OD, .625" Long - Same As OEM

Allis Chalmers: G Avery: A, BF, BG, R, V Massey Harris: Pony (sn 24090 & up) 1955 and up Minneapolis Moline - Replacement for: 112073, AT243 Center hole 1.500 dia. Timken # 1505 Replacement for: Allis Chalmers: 800041, 70800041 Avery:112073,...

Allis Chalmers - D10 (Up to SN 3501), D12 (Up to SN 3001), D14 (Prior to engine 149-19070, Prior to tractor SN 9001) Replacement - 70228188, 228188 Clutch Pilot Bushing

Allis Chalmers: G IH / Farmall: CubMassey Harris: Pony (#11), Pacer (#16)6.5" DIAMETER, 15/16" x 10 SPLINEReplacement for: Allis Chalmers: 800662 - International Harvester: 351469R92, 351773R91 - Massey Harris: 1500374M92

ALLIS CHALMERS - B, IB, C, CA, D10, D12, D14, D15 CLUTCH ALIGNMENT TOOL 10 SPLINE

Allis Chalmers - [ B, C, IB (Some using 8-1/2" diameter clutch instead of 9" diameter clutch) ], CA (Some to Sn 3148 also fits Some after Sn 34400 using 8-1/2" diameter clutch instead of 9" diameter clutch) AC Power Units - B125, B15 8-1/2" Rigid 10...