Allis Chalmers Models

Allis Chalmers - D21, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060International - 1086, 1486, 1586Chrome Curved Stack is Double Walled, 42" Tall, 4" O.D., 3" Inlet

Allis Chalmers - D10, D12, D14, D15, D17, D19, D21; WILL ALSO FIT 170, 175, 180, 185, 190, 190XT, 210, 220 IF USING 2-PIECE SEAT WITHOUT ARM RESTSRESTORATION QUALITY!! CUSHIONS ARE EMBOSSED LIKE ORIGINAL - STEEL FRAME, BACK REST & BOTTOM...

Allis Chalmers - B, C, CA, IB, RC 3-7/16 Over Bore - Kit includes Flat Top Pistons, Sleeves, O-Rings, Piston Rings, Pins

Allis Chalmers - IB, RC, B, C, CA, D10, D12 Replacement - 12522, TSX101, TSX102, TSX113, TSX114, TSX119, TSX120, TSX126, TSX128, TSX13, TSX132, TSX132A, TSX133, TSX134, TSX136, TSX137, TSX138, TSX142, TSX144, TSX146, TSX150, TSX151, TSX154, TSX155,...

Allis Chalmers - WD45, D17 4-1/8" Over Bore - Kit includes Cupped ( Dished )Pistons, Sleeves, O-Rings, Piston Rings, Pins Replacement - 70284361, 284361

Allis Chalmers - B, IB, C, CA Radiator is Pressurized - Must use AB-008D radiator cap only 14-3/4" Height - 15" Wide - 2-1/4" Depth Replaces - 70232113, 232113, 214337, 70214337

Allis Chalmers - G Replacement - 800056, 70800056 New Aftermarket Radiator

Allis Chalmers: D17, D19 Not Restoration Quality but Servicable. Fender is handmade overseas & is somewhat crude. Currently, this is the only fender that we are able to offer for these models. They are not perfect. 15 gauge thickness (.064) Replaces...

Allis Chalmers - D17, D19 Not Restoration Quality but Serviceable. Fender is handmade overseas & is somewhat crude. Currently, this is the only fender that we are able to offer for these models. They are not perfect. 15 gauge (.064 thick) Replaces -...

Allis Chalmers - WD, WC, WF 4-1/8" Over Bore - Kit includes Pistons, Sleeves, O-Rings, Piston Rings, Pins Replacement - 70283616, 283616

Allis Chalmers - G Gas / Fuel Tank comes in PRIMED Steel - USA MADE - sealed with Red Kote fuel tank liner Replaces: 800070

Allis Chalmers - B, C, CA, IB (Diameter Should be Measured Before Ordering); Replacement part for: Pressure Plate: 70226262,226262 Throwout: 70227704,227704 Clutch: 70226729,226729 Pilot: 70206968, 206968, 70228255, 228255 INCLUDES: 8-1/2" PRESSURE...

Allis Chalmers -WC, WD, WF (will fit when heavy duty pressure plate is required), WD45 ('early', will fit when heavy duty pressure plate is required), WD45 (gas, LP, diesel; SN: 99648 and up); Replaces: Pilot bearing: 70226859, Throw-out bearing:...

Allis Chalmers - WC, WD, WD45 (up to SN 99647), WFReplacement - Clutch: 70226764, 70227074, 210298, 219646, 207199, 204838, 226764, 227074, Press Plate: 70230506, 70208286, 204837, 207196, 216019, 230506, 70216791, 208286, 216791, 204842, Throw-out...

Allis Chalmers - D14, D15, H3 Crawler, ACC20 Lift Truck, ACC35 Lift Truck Replacement - 12566, TSX1003, TSX534, TSX551, TSX577, TSX593, TSX605, TSX650, TSX670, TSX683, TSX692, TSX696, TSX701, TSX714, TSX802, TSX809, TSX812, TSX815, TSX844, TSX860,...

Allis Chalmers - D10, D12, D14, D15, H3, I40, I400 138 and 149 Gas Engines 3-9/16 Over Bore - Kit includes Pistons, Sleeves, O-Rings, Piston Rings, Pins

Allis Chalmers - D14 Overall Height: 21" - Overall Width: 17 1/8" - Core Depth: 2" - 5" thick 3 Rows of Tubes - 9 Fins per Inch Replaces: 70228567, 70227888

Allis Chalmers - B, C, CA Large exhaust hole for muffler to fit thru the hood, Works with ACR1049 Muffler Replaces - 225260, 70225260 USA made

 Allis Chalmers - D10, D12 Series I, II & III Hood with Oval Hole Made Exactly Like Original Hoods are Made In United States

Allis Chalmers - B, C, CA, IB (Diameter Should be Measured Before Ordering); Replacement part for: Pressure Plate: 70226262,226262 Throwout: 70227704,227704 Clutch: 70226729,226729 Pilot: 70206968, 206968, 70228255, 228255 INCLUDES: 8-1/2" PRESSURE...