ALLIS CHALMERS 200 PARTS

Allis-Chalmers Light Switch w/ KnobReplacement light switch with knob for select Allis-Chalmers tractors. Key replacement number: 70249142.Threaded stem measures 11/16 - 28 UN.Part Number: AC-1096DFitsAllis-Chalmers 160Allis-Chalmers 170Allis-Chalmers...

Reprint service manual for WICO magnetos. This book includes assembly and disassembly instructions plus exploded parts views with numbered illustrations for easier reference.Useful for identifying parts and understanding magneto construction before...

Allis-Chalmers FM Series Rotor FM147Part Number: FM147Rotor for the FM Series magneto applications listed below. Check the model list carefully to confirm compatibility.FitsAllis Chalmers - Various ModelsMinneapolis Moline - R, Z (using FM-J4, FM-JV4,...

Allis-Chalmers FM Series Coil FM170Part Number: FM170This coil is for FM Series magneto applications listed below. Use the part number and magneto model to confirm fitment before ordering.FitsAllis Chalmers MM: R, Z (using most multi-cylinder FM...

Fairbanks Morse Magneto End Cap - FM142End cap for the listed Fairbanks Morse magneto applications. Part number: FM142.FitsAllis-Chalmers: Various modelsMinneapolis Moline: R, Z (using FM-J4, FM-JV4, FM-X4, FM-XE4, FM-XV4, FM4B, FM-ZV4)Fairbanks Morse...

Fairbanks Morse FMJ FMX Magneto Condenser - FM110Part Number: FM-2A, FM-2B, XD187New condenser for Fairbanks Morse FMJ and FMX magnetos. This part is listed as replacement number AXMR2433 and is sold under part number FM110.FitsFits the Fairbanks Morse...

Point Set R2437 for Fairbanks Morse MagsThis point set is FM154 and replaces Fairbanks Morse part R2437.It is listed for Fairbanks Morse mags with clockwise rotation.FitsMM: R, Z (using FM-J, FM-JE, JM-JG, FM-T with clockwise rotation)Fairbanks Morse...

Universal tie rod boot AB-371D for select Allis-Chalmers and other tractor models. Also used as a gear shift boot on some applications.Base: 1.3"Height: 0.965"Hole ID: 0.5"FitsAllis-ChalmersAveryCaseCockshuttFordIH / FarmallJohn...

OverviewUniversal tie rod boot FD-337D for Allis-Chalmers and other tractor applications. This black rubber protective boot is listed with multiple brand and model fitments.FitsAllis-ChalmersCaseCockshuttFord: 8N, NAA, 600, 800 (1948-57)IH / FarmallJohn...

Tie Rod Boot JD-736DNew tie rod boot with the dimensions listed below. Review the fitment and replacement numbers carefully before ordering.FitsListed fitment includes:Allis ChalmersCaseCockshuttFordIH / Farmall: Cub, Cub LoBoy, Super A, Super AV, C,...

Universal Tie Rod Boot AB-370DNew universal tie rod boot with the listed dimensions below. Use with care to confirm fitment against your application before ordering.FitsListed fitment includes:Allis-Chalmers: WD, WD45, D10, D12, D14, D15, D17, D19, 170,...

Allis-Chalmers Tie Rod Dust Boot FD-336D 70800442This tie rod dust boot is listed as serviceable for Allis-Chalmers G and includes universal applications shown below. Dimensions and cross references are listed for comparison.FitsAllis Chalmers: various -...

Economy Char-Lynn Steering CouplerThis economy coupler is for tractors with a U-joint at one end of the existing steering shaft.DJS part number: IH-555DFitsAllis Chalmers - variousCase - variousCockshutt - variousInternational - variousJohn Deere -...

Slip fit coupler for tractor steering shafts when a U-joint is needed. Original style part. Use this coupler where the steering shaft requires a universal joint connection.Part number: AB-380DFitsListed for tractors that need a U-joint on the steering...

Allis-Chalmers HOT Coil 55000-Volts 12V AB-348D12V high-voltage coil for applications listed below. Designed for faster starting, reduced plug fouling, and longer plug life.Important: Must use with AB-366D external resistor.FitsAllis...

6 Volt Distributor Coil - AB-011DThis 6 volt distributor coil is listed as AB-011D and fits a wide range of tractor applications. It includes multiple cross-reference numbers across several brands.FitsAllis Chalmers - G, B, C, CA, IB, RC, WD45, WD, WC,...

Clear 10-1/2" pre-cleaner bowl, 3-5/8" tall. For tractors with a 3" to 4" inlet. Replacement references include Donaldson P016330 and AC 70651270. Fits Air intake applications listed for the following tractors and equipment: ...

Allis-Chalmers Fuse Holder 230246Fuse holder rated at 20 amp. Fits a 1/2" chassis hole and is listed as a replacement for 230246.Use this page to match the fuse holder before ordering. Fitment and cross references are listed below exactly as...

Battery Retainer J-Bolt PairThis IH-721D battery retainer J-bolt set comes as a pair. These are universal battery J-bolts and measure 5/16-18 NC x 10.750" long.FitsAllis-Chalmers: variousAvery: variousCase: variousCockshutt: variousFord: variousIH /...

Pre-cleaner cap assembly with 10 1/2" bowl and 4" inlet. Fits tractors and equipment with a 4" inside diameter base.This listing includes the cap assembly and bowl. Use the cross references and fitment below to confirm application before...

Product OverviewPre-cleaner cap assembly AB-470D for selected tractors and equipment. Only models with 3" ID base and 7" bowl are listed.Note: Replacement numbers are listed below for reference.FitsAllis Chalmers - Gleaner: F2 (Gas & Dsl),...

Precleaner Kit JD-741DPart number: JD-741DReplacement numbers: 1306480, 249888, 70249888Metal precleaner kit with metal lid and base. Fits models with a 3" ID base and 7" bowl. Measure before ordering.FitsAllis-Chalmers: 170, 175, 180, 185,...

Pre Cleaner Cap Assembly AB-383DPre cleaner cap assembly for tractors with a 2-1/4" ID base. See listed fitment and replacement numbers below.FitsAllis Chalmers: variousCase: 450 Dsl, 530 Dsl, 570 Dsl, 730 Gas/LP, 830 Gas/LPCockshutt: CO-OP and...

Battery Cable 14-1/2" InsulatedThis 2 gauge insulated battery cable is 14-1/2 inches long and has 90 degree terminal ends with a 3/8" eyelet opening. On some applications, the eyelet hole may have to be drilled bigger.FitsAllis-Chalmers -...

Battery Cable 21" Insulated - AB-417D21-inch insulated battery cable with heavy-duty straight terminals and 2 gauge construction.Replacement for AM349T.FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational -...

Battery Cable 12" InsulatedThis 12" insulated battery cable is a heavy-duty 2 gauge cable with straight terminals. It has a 3/8" eyelet opening and is intended for select tractor applications.FitsAllis-Chalmers - variousCase - variousCockshutt -...

Battery Cable24" non-insulated 2 gauge ground cable with heavy-duty straight terminals and a 7/16" eyelet opening.FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational - 3514, 3616, 3850, 4100, 4156John Deere...

Battery Cable 10-1/2" InsulatedHeavy-duty insulated battery cable with straight terminals. This 10-1/2" cable is 2 gauge with a 3/8" eyelet opening.FitsAllis ChalmersAveryCaseCockshuttFordInternational / FarmallJohn DeereMassey FergusonMassey...

Battery Cable 9" Non-Insulated Ground CableHeavy-duty 2 gauge battery cable with straight terminals. This 9" non-insulated ground cable is listed for select tractor applications.FitsAllis Chalmers - variousCase - variousCockshutt - variousFord -...

Battery Cable AB-405DThis 13-inch non-insulated battery cable is a 2-gauge ground cable with straight terminals and 1/2-inch eyelet openings.Keep the important fitment and replacement details below for confirmation before ordering.FitsAllis-Chalmers -...

Battery Cable 19" Non-Insulated AB-421DHeavy duty ground cable. This non-insulated battery cable is 19" long, 2 gauge, and uses straight terminals with a 3/8" eyelet opening.FitsAllis Chalmers - variousCase - variousCockshutt - variousFord -...