Clutches & Parts

Allis Chalmers - B, C, CA, IB (Diameter Should be Measured Before Ordering); Replacement part for: Pressure Plate: 70226262,226262 Throwout: 70227704,227704 Clutch: 70226729,226729 Pilot: 70206968, 206968, 70228255, 228255 INCLUDES: 8-1/2" PRESSURE...

Allis Chalmers - B, C, CA, IB (Diameter Should be Measured Before Ordering); Replacement part for: Pressure Plate: 70226262,226262 Throwout: 70227704,227704 Clutch: 70226729,226729 Pilot: 70206968, 206968, 70228255, 228255 INCLUDES: 8-1/2" PRESSURE...

Allis Chalmers - B, C, CA, IB (Diameter Should be Measured Before Ordering); Replacement part for: Pressure Plate: 70226262,226262 Throwout: 70227704,227704 Clutch: 70226729,226729 Pilot: 70206968, 206968, 70228255, 228255 INCLUDES: 8-1/2" PRESSURE...

Allis Chalmers - D17 Series IV (SN 75000 and up), 170, 175 Includes 11" Pressure Plate, 6 Pad Clutch Disc, Throw-out Bearing, Pilot Bearing Rebuilt

Allis Chalmers - D10 (3502 & UP), D12 (3002 & UP), D15, H3, HD3 Replaces - 247745, 70247745 9" Clutch Pressure Plate

Allis Chalmers - B, IB, C, CA, D10 (UP to 3501), D12 (UP to 3001), D14, WF Replaces - 228926, 70228926 9" Clutch Pressure Plate

Allis Chalmers - D17, D19, 170, 175 Replaces - 241255, 70241255, 70232241, 232241 11" New Clutch Disc Spring Loaded 10 Spline 11" Outside Diameter, 1-1/4" Hub - 10 Spline (SPRING LOADED WOVEN)          

Allis Chalmers - D17, D19, 175, 180, 185, [D14 (SN D14-21677 & Up; 2 required per tractor)], D15 (2 required per tractor), D21 (3-Point Hitch Lever Bushing; 2 required) 2 bushings required for most applications. Replaces - 70235082, 235082,...

Allis Chalmers - WD, WD45, WD45 Diesel Clutch Housing Gasket - Torque Housing to Engine Gasket - OEM AGCO Brand Replaces - 70225915, 225915

Allis Chalmers - D17 (SN 75001>) 170, 175 Pressure Plate 11", 30 Spline, 1.9875" Spline Diameter, w/ 1.437" flywheel step Replaces - 70242572, 242572

ALLIS CHALMERS - B, IB, C, CA, D10, D12, D14, D15 CLUTCH ALIGNMENT TOOL 10 SPLINE

ALLIS CHALMERS - 7010, 7020, 7030, 7040, 7050, 7060, 7080, 8010, 8030, 8070, 4W220   12" 4 PAD 1-1/2" HUB 23 SPLINE

Allis Chalmers - WF, WC, WD, WD45 10" 4 Pad Clutch Disc 1-1/4" Hub 10 Spline Replaces - 70226724, 70227074

ALLIS CHALMERS - 180, 185, 190, 190XT, 200 12 INCH WITH 7" HUB 12 SPRING 3 FINGER

ALLIS CHALMERS - D17 SERIES I II & III (NOT SERIES 4) UP TO S/N 75000 11" PRESSURE PLATE 3 LEAVER (WITH  1.437" FLYWHEEL STEP)  

Allis Chalmers - WC, WF Clutch shaft input seal (2 required per tractor) measures approximately 1.245" ID, 2.008" OD, 0.215" Thick Replaces - 70202086, 202086

ALLIS CHALMERS - B, C, CA   8 1/2" CLUTCH DISC 4 PAD 1 1/8" HUB 10 SPLINE

ALLIS CHALMERS - D17 SERIES IV (SN 75001 & UP), D19, 170, 175 1.25 INNER DIAMETER 10 SPLINE

Allis Chalmers - D10 (Up to SN 3501), D12 (Up to SN 3001), D14 (Prior to engine 149-19070, Prior to tractor SN 9001) Replacement - 70228188, 228188 Clutch Pilot Bushing

Allis Chalmers - D10 (SN 3501 & UP), D12 (SN 3001 & UP) Replacement - 70237137, 237137 Wooven Clutch Disc 9", 24 Spline, 1-1/4" Hub