Same Day Shipping On 99% Of Orders

Allis Chalmers RC Tractor Parts

About the Allis-Chalmers RC

The RC was a short-lived row-crop tractor introduced in 1938 between the B and the C. Allis-Chalmers used the B engine in a WC-style chassis, so the RC could use the same implements as the WC while offering a lower-cost option.

The RC was built from 1938 through 1941, and the Model C replaced it. That short production run means the RC is less common today than the B, C, or WC.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the rear face of the rear axle housing.

The table below shows the beginning tractor serial number for each Model RC year:

 

1939-1939
Model RC year Beginning serial number
1939 4
1940-1940
Model RC year Beginning serial number
1940 4,392
1941-1941
Model RC year Beginning serial number
1941 5,417

Total production: 5,501 Model RC tractors.

Allis-Chalmers RC Paint Reference

For restoration planning, the Allis-Chalmers RC is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers RC paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Black Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Zenith Carburetor Float, used display product for carburetor adjustment and operation.

    Zenith Carburetor Float (Display)

    $13.50
    689
    Zenith carburetor float for listed applications. Verify your carburetor manufacturer number before ordering. Part Number: AB-190D Fits Allis Chalmers: B, IB, C, CA, WF, RC w/ zenith 9492 or 9507,...
    Out of stock
  • 3-1/2 inch Monroe Seat Pivot Support Rod, used automotive part displayed on a flat surface.

    3-1/2" Monroe Seat Pivot Support Rod(Display)

    $16.50
    679
    3-1/2" Monroe Seat Pivot Support Rod for select Allis Chalmers, International, John Deere, and Massey Harris tractors. Exact copy of original and includes 2 flat washers, 2 rubber bushings, and 2 #5...
    Add to Cart
  • Delco Distributor Terminal Insulator Assembly Square Style - AB-500D, used part displayed with a black insulator and metal terminal components on a brown surface.

    Delco Distributor Terminal Insulator Assembly Square Style - AB-500D (Display)

    $12.00
    674
    Delco Distributor Terminal Insulator Assembly, Square Style Important: AB-500D is a square-style Delco distributor terminal insulator assembly. It is for Delco distributors only and will not fit IH...
    Add to Cart
  • Delco Distributor Cap Spring Clip AB-488SD, display of a metal spring clip and its mounting plate on a brown surface with a label.

    Delco Distributor Cap Spring Clip AB-488SD (Display)

    $12.00
    673
    Distributor Cap Spring Clip AB-488SD AB-488SD is a Delco distributor cap spring clip with the shorter bracket. It includes 1 spring clip, 1 bracket, 1 screw, and 2 washers. The bracket measures .700"...
    Add to Cart
  • Delco Distributor Cap Spring Clip With Longer Bracket, metal splitter clip with extended bracket for distributor cap

    Delco Distributor Cap Spring Clip With Longer Bracket (Display)

    $12.00
    672
    Product Overview Distributor cap spring clip with a 1" long bracket, one screw, and two washers. Longer bracket than the bracket in ABC488S. Fits Allis Chalmers: B, IB, C, CA, G, RC, WC, WF, WD,...
    Add to Cart
  • Allis-Chalmers Cap Screw Bolt & Block 70202132, display image of a used bolt, a rectangular metal block with a hole, and a label indicating part number 665.

    Allis-Chalmers Cap Screw Bolt & Block 70202132 (Display)

    $11.00
    665
    Cap screw, bolt, and block for fuel tank and radiator straps. Sold individually and supplied as 1 screw and 1 mounting block. Part Number: 70202132 Fits Allis Chalmers - B (prior to SN B-58401), IB,...
    Add to Cart
  • Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899, display of a metal tube stand pipe on a brown background with a label underneath reading '637 USED PARTS / DISPLAY'.

    Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899 (Display)

    $15.75
    637
    Allis-Chalmers oil filter tube element stand pipe for the listed Allis-Chalmers and AC Misc. applications. Part Number: KI1189 Fits Allis Chalmers - G, B, C, CA, IB, RC, WC, WF, WD, WD45, D10, D12,...
    Add to Cart
  • Universal Ammeter Gauge (20-0-20), display of black meter with white markings and needle indicating current in amperes.

    Universal Ammeter Gauge (20-0-20) (Display)

    $15.75
    623
    Universal ammeter gauge with a 20-0-20 range and chrome bezel. Compatible with Allis-Chalmers, Case, Cockshutt, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver...
    Add to Cart
  • Allis-Chalmers 6 Volt Generator Cut Out Relay Assembly, display view showing electrical relay with metal mounting brackets and 6V label.

    Allis-Chalmers 6 Volt Generator Cut Out Relay Assembly (Display)

    $22.25
    631
    6 volt generator cut out relay assembly for the listed tractor applications. For Autolite and Delco generators with mounting tabs parallel with cut out. Part Number: AB-015D Fits Allis Chalmers: B,...
    Add to Cart
  • Universal Ammeter Gauge (20-0-20), analog display of current in amperes with a needle and a black faceplate with measurement markings.

    Universal Ammeter Gauge (20-0-20) (Display)

    $15.75
    630
    Universal ammeter gauge with a 20-0-20 range and chrome bezel. Compatible with Allis-Chalmers, Case, Cockshutt, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver...
    Add to Cart
  • Allis Chalmers Amp Gauge, round meter displaying current ampere readings with 'Charge' and 'Discharge' indicators.

    Allis Chalmers Amp Gauge (Display)

    $23.75
    629
    Allis Chalmers amp gauge with a chrome bezel and restoration quality finish. Fits the Allis Chalmers models listed below. Part Number: AC-258D Fits Allis Chalmers: B, C, CA, G, WC, WD, WD45, WD45D,...
    Out of stock
  • Ammeter 60-0-60 AMP Gauge 2-inch Diameter (Display), round analog current meter for measuring electrical current with black face and red needle.

    Ammeter 60-0-60 AMP Gauge 2" Dia (Display)

    $18.50
    627
    Universal 60-0-60 AMP ammeter gauge with a 2" dia. hole fitment. Condition: New. Part Number: AMG60 Fits Allis Chalmers - 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 2RCP, 4650, 4660,...
    Add to Cart
  • Allis Chalmers Amp Gauge, a circular analog ammeter display showing amperes with a needle indicator and a white dial face.

    Allis Chalmers Amp Gauge (Display)

    $23.75
    612
    Allis Chalmers amp gauge with a chrome bezel and restoration quality finish. Fits the Allis Chalmers models listed below. Part Number: AC-258D Fits Allis Chalmers: B, C, CA, G, WC, WD, WD45, WD45D,...
    Out of stock
  • Allis Chalmers Amp Gauge (60-0-60) 12 Volt, a round electrical gauge with a white face, black markings, and a needle indicating zero, used for measuring electrical current in amps, displayed on a brown background.

    Allis Chalmers Amp Gauge (60-0-60) 12 Volt (Display)

    $23.75
    611
    12 volt Allis Chalmers amp gauge with a 60-0-60 scale and the Allis Chalmers logo. Part Number: AC-1833D Fits Allis Chalmers - Various (Any tractors that have been converted to 12 volt...
    Add to Cart