ALLIS CHALMERS G PARTS

Crankshaft for Allis Chalmers G and Massey Harris Pony applications with the N62 Continental engine. Part Number: AC-131DFits Allis Chalmers G w/ N62 Continental engine Massey Harris Pony w/ N62 Continental engine Forklifts with the N-62 Continental...

Part Number: ACR6361Allis Chalmers G RadiatorNew aftermarket radiator for Allis-Chalmers G tractors. Radiator cap is not included.FitsAllis Chalmers GReplaces / Cross Reference80005670800056SpecsNew aftermarket radiatorRadiator cap not includedCondition:...

Allis Chalmers G gas/fuel tank in primed steel, USA made and sealed with Red Kote fuel tank liner.Threaded outlet for fuel line. Fuel cap sold separately.Part Number: KI1043FitsAllis Chalmers GReplaces / Cross Reference80007070800070NotesPart Number:...

Allis Chalmers G carburetor with TSV13 brass tag.Part Number: ACR4528FitsAllis Chalmers - GReplaces / Cross Reference70800303800303NotesLike original, does not say "Marvel Schebler" but has "TSV13" on brass tagCarb MFG:...

Allis Chalmers G rebore kit in .020 oversized fitment.Includes aluminum pistons, rings, wrist pins, and clips.Part Number: ACR2489FitsAllis Chalmers G (.020 oversized)Specs2 3/8" +.020Aluminum pistonsNotesIncludes: pistons, rings, wrist pins, and...

Part Number: ACR2488Allis-Chalmers G Rebore KitStandard rebore kit for the Allis-Chalmers G. Includes aluminum pistons, rings, wrist pins, and clips.FitsAllis-Chalmers GSpecs2 3/8" pistonsAluminum pistonsIncludes pistons, rings, wrist pins, and clips

Part Number: Ki1032Allis-Chalmers G HoodHood for Allis-Chalmers G. This part is made from 18 gauge steel and is primed.FitsAllis-Chalmers GReplaces / Cross Reference70800089800089Specs18 gauge steelPrimed

Electronic Ignition Conversion Kit for 6V positive ground Allis-Chalmers applications. Replaces points and condenser with a breakerless solid-state ignition system that fits under the stock distributor cap.For Delco distributor numbers 1111411, 1111530,...

Part Number: AC-006DAllis-Chalmers G Rear Axle ShaftOverall length: 24-3/8"Rear axle shaft for Allis-Chalmers G tractors.Replaces / Cross Reference80090270800902FitsAllis-Chalmers GNotesNew part.

Pertronix Ignitor electronic ignition conversion kit for Delco 4-cylinder applications with 12V positive ground. Replaces points and condenser with a breakerless solid-state ignition system that fits under the stock distributor cap.Use this kit for the...

1 wire mini alternator with pulley, 35 amp. Used to convert 6 volt systems to 12 volt systems on negative ground systems only. Preferred for tractors requiring a smaller diameter alternator for clearance.Part Number: AB-535DFitsAllis-Chalmers...

Ignitor Delco fits 4-cylinder applications with 12 volt negative ground. This electronic ignition conversion kit replaces points and condenser with a breakerless solid state system.It fits entirely under your stock distributor cap.Part Number:...

Oil Pump Repair Kit for Allis-Chalmers G with N62 Continental Engine and Massey Harris Pony with N62 Continental Engine.Also fits EARTHMASTER Model C and CH.Part Number: AC-322DFitsAllis-Chalmers G (w/ N62 Continental Engine)Massey Harris Pony (w/ N62...

Part Number: AC-323DValve Train KitValve train kit for Allis Chalmers G and Massey Harris Pony and others using N62 Continental Engine. Retainers and pins are included.FitsAllis Chalmers GMassey Harris PonyOthers using N62 Continental EngineReplaces /...

41-tooth main shaft drive gear for Allis Chalmers G tractors. Listed with replacement numbers 800377 and 200951.Part Number: AC-021DFitsAllis Chalmers GReplaces / Cross Reference800377200951Specs41 teethNotesVerify tooth count and part number before...

Complete original-style wiring kit for Allis-Chalmers G tractors. Supplied as a complete wiring kit for the listed model.Part Number: AC-329DFitsAllis Chalmers GSpecsOriginal styleComplete wiring kitNotesConfirm tractor model and wiring setup before...

63 amp one wire alternator with pulley, used for converting 6 volt to 12 volt systems.Built-in regulator and 1 wire hook up for 12 volt negative ground systems.Part Number: AB-418DFitsAllis Chalmers: Can be used on IB, B, C, CA, D10, D12, D14 by using...

Fuel Tank Support Bracket Assembly for Allis-Chalmers G models.Includes bolts, nuts, and washers.Part Number: KI1009FitsAllis Chalmers - GReplaces / Cross Reference70800058800058NotesCondition: New

Crankshaft pulley for Allis-Chalmers G and Massey Harris PONY. Measure before ordering.Part Number: AC-349DFitsAllis Chalmers: GMassey Harris: PONYReplaces / Cross ReferenceAC: 800220MH: 1500005M1CASTING NUMBER: N62K318Specs5-3/16" O.D.

Allis-Chalmers G and Massey Harris Pony piston ring set for a 4-cylinder engine with 0.020" overbore.Measure old rings before ordering. Rings can NOT be returned if opened.Part Number: AC-2063DFitsAllis Chalmers G — 0.020" overbore, 2.395" bore, (2) 0...