Same Day Shipping On 99% Of Orders

Allis Chalmers D19 Tractor Parts

The D19 joined the D Series in 1961 as a larger row-crop tractor with an 85-horsepower six-cylinder engine. It was offered with gasoline, LP-gas, or diesel power and an eight-speed transmission for heavier field work.

Built through 1964, the D19 was one of the largest tractors in the original D Series lineup. The 190 followed it in the Allis-Chalmers tractor line.

Serial number locations: The tractor serial number is on the machined surface at the top rear of the transmission housing, below the seat. The engine serial number is on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D19 year:

 

1961-1962

Model D19 year Beginning serial number
1961 1,001
1962 1,250

1963-1963

Model D19 year Beginning serial number
1963 12,001

1964-1964

Model D19 year Beginning serial number
1964 14,945

Total production: 10,591 Model D19 tractors.

Filter By

Sort By:

Display Type:
Filters
  • Universal Oil Pressure Gauge, round black display with white markings and needle, measuring 0-80 pounds per square inch.

    Universal Oil Pressure Gauge 0-80 lb (Display)

    $19.75
    621
    Part Number: AB-005D Universal Oil Pressure Gauge This 0-80 lb oil pressure gauge is for various tractor models. It has 1/8" male pipe threads, a black face with white letters, and a chrome bezel. Fits Allis-Chalmers: Various, including A, D15, D17,...
  • Ammeter Amp Gauge (30-0-30) Display, round electrical ammeter gauge with black dial and silver bezel, measuring amperes in a vehicle or electrical system.

    Ammeter Amp Gauge (30-0-30) (Display)

    $15.75
    620
    Ammeter amp gauge with a 30-0-30 range, chrome bezel, and 2" diameter hole fitment. Fits the tractor models and applications listed below. Part Number: AB-109D Fits Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series...
  • Allis-Chalmers Temperature Gauge D10 D12 D14 D15 D17 D19 WD45 Diesel, round water temperature gauge with black cord and metallic mounting, displaying temperature range from 160 to 220 degrees.

    Allis-Chalmers Temperature Gauge D10 D12 D14 D15 D17 D19 WD45 Diesel (Display)

    $39.75
    616
    Part Number: AC-260D Allis-Chalmers Temperature Gauge This Allis-Chalmers temperature gauge is for WD45 Diesel, D10, D12, D14, D15, D17, and D19 models. It includes an Allis-Chalmers logo and a 70" lead. Fits Allis-Chalmers: WD45 Diesel, D10, D12, D14,...
  • Allis-Chalmers Oil Pressure Gauge 0-80 PSI AC-262D, showing the needle indicating normal oil pressure level.

    Allis-Chalmers Oil Pressure Gauge 0-80 PSI AC-262D (Display)

    $25.50
    615
    Allis-Chalmers Oil Pressure Gauge 0-80 PSI Part Number: AC-262D This 0-80 PSI oil pressure gauge is listed for the models below. It has 1/8" male pipe threads. Fits Allis Chalmers: A, D15 (DSL), D17 (DSL), WD45 (DSl), D19 (Gas, LP, & Diesel), U, UC...
  • Allis Chalmers Amp Gauge, round meter displaying current ampere readings with 'Charge' and 'Discharge' indicators.

    Allis Chalmers Amp Gauge (Display)

    $23.75
    629
    Allis Chalmers amp gauge with a chrome bezel and restoration quality finish. Fits the Allis Chalmers models listed below. Part Number: AC-258D Fits Allis Chalmers: B, C, CA, G, WC, WD, WD45, WD45D, WF, D10, D12, D14, D15, D17, D19, D21, RC, 170, 175,...
  • Allis Chalmers Amp Gauge 60-0-60 70254407, a circular analog meter with a needle and a white face displaying amperes measurement from 0 to 60, used for vehicle or machinery electrical diagnostics.

    Allis Chalmers Amp Gauge 60-0-60 70254407 (Display)

    $35.50
    628
    Aftermarket 60-0-60 gauge made just like the original ones that came on the tractor when new. Made to give it that original look. Part Number: DJS70254407 Fits Allis Chalmers D10 Allis Chalmers D12 Allis Chalmers D14 Allis Chalmers D15 Allis Chalmers...
  • Water Temperature Gauge (Display), black dial with white markings and needle showing temperature from 0 to 220 degrees Fahrenheit.

    Water Temperature Gauge (Display)

    $27.75
    625
    Part Number: AB-239D Water Temperature Gauge This water temperature gauge reads 100 to 280 degrees and includes a 6-foot capillary tube, lighting, and mounting hardware. It has a chrome bezel and fits a 2" diameter hole. Fits Allis-Chalmers: I-40,...
  • Allis-Chalmers Oil Pressure Switch / Sensor 70240150, showing the sensor with a metal body, electrical connector, and threaded end for installation.

    Allis-Chalmers Oil Pressure Switch / Sensor 70240150 (Display)

    $20.00
    607
    Part Number: 70240150 Allis-Chalmers Oil Pressure Switch / Sensor Oil pressure switch / sensor for the listed Allis-Chalmers tractor applications. Fits Allis-Chalmers D17 IV Allis-Chalmers D19 Allis-Chalmers 170 GAS Allis-Chalmers 175...
  • Allis Chalmers Green Power Director Dash Oil Pressure Warning Light (Display), used part with black and metallic components on a brown surface with a white label reading '604, USED PARTS / DISPLAY'.

    Allis Chalmers Green Power Director Dash Oil Pressure Warning Light (Display)

    $31.50
    604
    Allis Chalmers - D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220 Part Number: 70240837-G Replaces / Cross Reference 70240837, 240837, 70240838, 240838 Notes Green Power Director Dash Oil Pressure Warning Light.   "This part...
  • Allis Chalmers Red Power Director Dash Oil Pressure Warning Light (Display), red indicator light with metal mounting hardware.

    Allis Chalmers Red Power Director Dash Oil Pressure Warning Light (Display)

    $31.50
    603
    Allis Chalmers - D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220 Part Number: 70240837-R Replaces / Cross Reference 70240837, 240837, 70240838, 240838 Notes Red Power Director Dash Oil Pressure Warning Light.   "This part was...
  • Fuse Holder 20 Amp, display image of a used electrical fuse holder with a black and metallic design on a brown surface with a label.

    Fuse Holder 20 Amp (Display)

    $10.25
    601
    20 amp fuse holder for 3AG type fuses. Fits a 1/2" chassis hole and uses a nut for mounting. Part Number: AB-389D Fits Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 180, 185, 190, 190XT, 200, 210, 220. Case: 430, 530, 630, 730, 830, 930, 1030, 770,...
  • 12-Volt Dash Light Assembly for Allis-Chalmers, display of used tractor dash light with wiring for vehicle dashboard

    12-Volt Dash Light Assembly for Allis-Chalmers (Display)

    $25.50
    592
    12-volt dash light assembly for Allis-Chalmers tractors. Chrome finish with a 0.658" socket diameter and 1" center-to-center mounting holes. Part Number: AC-273D Fits Allis-Chalmers 190XT Allis-Chalmers D10 Allis-Chalmers D12 Allis-Chalmers...
  • Allis Chalmers Ignition Key Switch, used ignition switch with metal body and electrical terminals.

    Allis Chalmers Ignition Key Switch (Display)

    $31.75
    584
    Ignition key switch for select Allis Chalmers tractors and related applications. 5 spade terminals with screws, .995" diameter threaded end, OEM style Delco Remy. Includes jam nut and 2 keys. 4 position switch. Part Number: AC-288D Fits Allis Chalmers...
  • Allis-Chalmers 2-Position Light Switch AC-290D 228330, showing used electrical switch with metal housing and actuator on a brown background with a barcode label.

    Allis-Chalmers 2-Position Light Switch AC-290D 228330 (Display)

    $23.75
    578
    Allis-Chalmers 2-Position Light Switch Part Number: AC-290D This D Series 2-position light switch is listed for the tractor models below and uses 2 spade terminals. Fits Allis Chalmers - D10, D12, D14, D15, D17, D19, D21, 190, 190XT Replaces / Cross...
  • Light Visor for Allis-Chalmers D10 D12 D15 D17 D19, display view of a red curved plastic part on a brown cardboard surface with a label that reads 'USED PARTS / DISPLAY' and the number '575'.

    Light Visor for Allis-Chalmers D10 D12 D15 D17 D19 (Display)

    $15.75
    575
    Light visor MF-108D for select Allis-Chalmers, Massey Ferguson, and Massey Harris applications. New condition. Part Number: MF-108D Fits Allis Chalmers: D10 (SN: 9001 & up), D12 (SN: 9001 & up), D15 (SN: 9001 & Up), D17 (SN: 42001 & Up),...
  • 4409X Sealed Beam Combination Rear Light Bulb 12V, display showing a round automotive rear light bulb with a reflective surface and red outer rim on a plain background

    4409X Sealed Beam Combination Rear Light Bulb 12V (Display)

    $16.00
    574
    Part Number: IH-899D Fits Allis Chalmers: D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7040, 7050, 7060, 7080 Avery Case Cockshutt: models with sealed beam combo tail light IH / Farmall: Cub, 140...