Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Filter By

Sort By:

Display Type:
Filters
  • Needle & Seat Assembly Main Jet for Allis Chalmers WD45 D17, metal engine part with threaded and L-shaped components on a brown background.

    Needle & Seat Assembly Main Jet for Allis Chalmers WD45 D17 (Display)

    $25.75
    692
    Needle & seat assembly main jet for select Allis-Chalmers tractors. Part Number: AC43-671 Fits WD45 D17 (All Series) Marvel Schebler carburetors: TSX561, TSX464, TSX773, TSX871 Replaces / Cross...
    Add to Cart
  • Zenith Carb Float for Allis-Chalmers WD45, D15, D17, used product display showing metal float with mounting bracket.

    Zenith Carb Float for Allis-Chalmers WD45, D15, D17 (Display)

    $19.75
    691
    Zenith carb float for the listed applications. Verify the carburetor manufacturer number before ordering, since fitment depends on the carb MFG number. Part Number: AB-452D Fits Allis-Chalmers: WD45,...
    Add to Cart
  • Zenith Carburetor Float, used display model with a metallic gold finish on a cardboard surface.

    Zenith Carburetor Float (Display)

    $27.75
    690
    Zenith Carburetor Float AB-454D. Check the carburetor number carefully before ordering. Fits the listed tractor applications and Zenith carburetor numbers below. Part Number: AB-454D Fits Allis...
    Add to Cart
  • Marvel Schebler Carburetor Float, display of a used carburetor float for a Marvel Schebler carburetor

    Marvel Schebler Carburetor Float (Display)

    $17.50
    687
    New Marvel Schebler carburetor float for large bowl Marvel Schebler carburetors. Confirm the carburetor manufacturer number before ordering. Part Number: AB-037D Fits Allis-Chalmers: WD45, D15, D17,...
    Add to Cart
  • Allis Chalmers Bronze Seat Bushings Set 70227910, display of 8 metal bushings on a flat surface with label indicated as used parts.

    Allis Chalmers Bronze Seat Bushings Set 70227910 227910 (Display)

    $24.50
    682
    Set of 8 bronze seat bushings for Allis Chalmers tractors. Sold under part number 70227910. Part Number: 70227910 Fits Allis Chalmers D10 Allis Chalmers D12 Allis Chalmers D14 Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Upper Seat Spacer Pivot Bushing 70227915, display showing a used blue metal bushing with some rust spots on a cardboard surface with a white label that reads '681 USED PARTS / DISPLAY'.

    Allis-Chalmers Upper Seat Spacer Pivot Bushing 70227915 (Display)

    $11.00
    681
    Upper seat spacer, pivot for shock absorber for Allis-Chalmers tractors. Sold individually; 2 per tractor. Part Number:...
    Add to Cart
  • Delco Distributor Terminal Insulator Assembly Square Style - AB-500D, image of a black insulator assembly with metal bolts on a brown surface with a label reading 'USED PARTS / DISPLAY' and the number 674.

    Delco Distributor Terminal Insulator Assembly Square Style - AB-500D (Display)

    $12.00
    674
    Delco Distributor Terminal Insulator Assembly, Square Style Important: AB-500D is a square-style Delco distributor terminal insulator assembly. It is for Delco distributors only and will not fit IH...
    Add to Cart
  • Delco Distributor Cap Spring Clip AB-488SD, display of used parts including a metal spring clip and a small metal mounting bracket on a brown background.

    Delco Distributor Cap Spring Clip AB-488SD (Display)

    $12.00
    673
    Distributor Cap Spring Clip AB-488SD AB-488SD is a Delco distributor cap spring clip with the shorter bracket. It includes 1 spring clip, 1 bracket, 1 screw, and 2 washers. The bracket measures .700"...
    Add to Cart
  • Delco Distributor Cap Spring Clip With Longer Bracket, used automotive distributor parts, display of two metal components on a brown background.

    Delco Distributor Cap Spring Clip With Longer Bracket (Display)

    $12.00
    672
    Product Overview Distributor cap spring clip with a 1" long bracket, one screw, and two washers. Longer bracket than the bracket in ABC488S. Fits Allis Chalmers: B, IB, C, CA, G, RC, WC, WF, WD,...
    Add to Cart
  • Allis Chalmers Bullet Tail Light Lens Plastic D14 D15 D17, display of a used red tail light lens for tractor tail light assembly.

    Allis Chalmers Bullet Tail Light Lens Plastic D14 D15 D17 (Display)

    $17.50
    668
    Bullet tail light lens plastic for listed Allis Chalmers, AC Lawn and Garden, and John Deere applications. USA made. Part Number: AC-220D Fits Allis Chalmers - D14 (sn 19001 and up), D15, D17 - AC...
    Add to Cart
  • Allis-Chalmers Snap Coupler Bell Hook Spring 70226514, used part with black metal hook spring on a brown surface.

    Allis-Chalmers Snap Coupler Bell Hook Spring 70226514 (Display)

    $15.00
    667
    Allis-Chalmers snap coupler bell hook spring for the listed tractors with quick hitch system. Use the fitment information below to confirm application. Part Number: 70226514 Fits Allis-Chalmers...
    Add to Cart
  • Allis-Chalmers Cap Screw Bolt & Block 70202132, used bolt and block display with a bolt and a metal block on a brown surface.

    Allis-Chalmers Cap Screw Bolt & Block 70202132 (Display)

    $11.00
    665
    Cap screw, bolt, and block for fuel tank and radiator straps. Sold individually and supplied as 1 screw and 1 mounting block. Part Number: 70202132 Fits Allis Chalmers - B (prior to SN B-58401), IB,...
    Add to Cart
  • Bolt Stop for Allis Chalmers, Case, Ford, John Deere, Massey Ferguson, displayed on a cardboard surface with label 'USED PARTS / DISPLAY'.

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson (Display)

    $7.00
    662
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini. Use with parallel or 90 degree...
    Add to Cart
  • Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21, display of a used metal hood latch snap in a close-up photograph.

    Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21 (Display)

    $9.50
    650
    Part Number: CH4000 Hood Latch Snap Latch Hood latch snap latch for select Allis Chalmers tractors, bale throwers, balers, and some Gleaner combines. Strike not included. Fits ALLIS CHALMERS - D10,...
    Add to Cart
  • Allis Chalmers D10 D12 D14 D15 D17 D19 D21 Hood Latch, used display model of tractor hood latch part.

    Allis Chalmers D10 D12 D14 D15 D17 D19 D21 Hood Latch (Display)

    $9.50
    649
    Part Number: CH4009 Allis Chalmers Hood Latch Loop-style snap hood latch for the Allis Chalmers tractors and Gleaner combines listed below. Fits Allis Chalmers D10 Allis Chalmers D12 Allis Chalmers...
    Add to Cart
  • Allis Chalmers Cream Steering Wheel, display view of a vintage tractor steering wheel with a cream-colored finish and three-spoke design.

    Allis Chalmers Cream Steering Wheel (Display)

    $46.25
    648
    Cream steering wheel for listed Allis-Chalmers tractors and combines. Like original and made with all new material. Part Number: AC-137D Fits Allis Chalmers - ED40, D10, D12, D14 (sn 19001 and up),...
    Add to Cart
  • Allis Chalmers Cream Steering Wheel, display model of a vintage tractor steering wheel with white color and three-spoke design.

    Allis Chalmers Cream Steering Wheel (Display)

    $46.25
    647
    Cream steering wheel for listed Allis-Chalmers tractors and combines. Like original and made with all new material. Part Number: AC-137D Fits Allis Chalmers - ED40, D10, D12, D14 (sn 19001 and up),...
    Add to Cart
  • Allis Chalmers Cream Steering Wheel, vintage farm machinery display part.

    Allis Chalmers Cream Steering Wheel (Display)

    $46.25
    646
    Cream steering wheel for listed Allis-Chalmers tractors and combines. Like original and made with all new material. Part Number: AC-137D Fits Allis Chalmers - ED40, D10, D12, D14 (sn 19001 and up),...
    Add to Cart