We Will Be Closed Monday For Labor Day
Same Day Shipping On 99% Of Orders

Allis Chalmers WF Tractor Parts

Allis-Chalmers WF Tractor Parts

About the Allis-Chalmers WF

The Allis-Chalmers WF was the standard-tread counterpart to the row-crop WC. It used a four-cylinder gasoline engine, four-speed transmission, and a standard front axle for general farm work rather than cultivating between rows.

The WF was built from 1937 through 1951. Early tractors had the square radiator, while the styled WF began during the 1940 production year and continued through 1951. The serial number table shows where the change occurred.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the differential housing at the rear of the tractor.

The table below shows the beginning tractor serial number for each WF year and styling:

 

1937-1941
Model WF year Beginning serial number
1937 - Unstyled 4
1938 - Unstyled 389
1939 - Unstyled 1,336
1940 - Unstyled 1,892
1940 - Styled 1,904
1941 - Styled 2,300
1942-1946
Model WF year Beginning serial number
1942 - Styled 2,704
1943 - Styled Not listed
1944 - Styled 3,004
1945 - Styled 3,195
1946 - Styled 3,510
1947-1951
Model WF year Beginning serial number
1947 - Styled 3,748
1948 - Styled 4,111
1949 - Styled 5,500
1950 - Styled 7,318
1951 - Styled 8,316

Total production: Unknown.

Allis-Chalmers WF Paint Reference

For restoration planning, the Allis-Chalmers WF is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers WF paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1, Black Persian Orange 1, Black Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Zenith Carburetor Float, used display product for carburetor adjustment and operation.

    Zenith Carburetor Float (Display)

    $13.50
    689
    Zenith carburetor float for listed applications. Verify your carburetor manufacturer number before ordering. Part Number: AB-190D Fits Allis Chalmers: B, IB, C, CA, WF, RC w/ zenith 9492 or 9507,...
    Out of stock
  • Radiator Shutter Crank for Allis Chalmers B, C, CA, IB, used display part with orange painted metal shaft and handle.

    Radiator Shutter Crank for Allis Chalmers B, C, CA, IB (Display)

    $29.25
    684
    Radiator shutter crank handle for listed Allis Chalmers tractors and AC power units. Part Number: KI1099 Fits Allis Chalmers: B, C, CA, IB; serviceable for WC, WF, WD, WD45 AC Power Unit: W201,...
    Add to Cart
  • 3-1/2 inch Monroe Seat Pivot Support Rod, used automotive part displayed on a flat surface.

    3-1/2" Monroe Seat Pivot Support Rod(Display)

    $16.50
    679
    3-1/2" Monroe Seat Pivot Support Rod for select Allis Chalmers, International, John Deere, and Massey Harris tractors. Exact copy of original and includes 2 flat washers, 2 rubber bushings, and 2 #5...
    Add to Cart
  • Delco Distributor Terminal Insulator Assembly Square Style - AB-500D, used part displayed with a black insulator and metal terminal components on a brown surface.

    Delco Distributor Terminal Insulator Assembly Square Style - AB-500D (Display)

    $12.00
    674
    Delco Distributor Terminal Insulator Assembly, Square Style Important: AB-500D is a square-style Delco distributor terminal insulator assembly. It is for Delco distributors only and will not fit IH...
    Add to Cart
  • Delco Distributor Cap Spring Clip AB-488SD, display of a metal spring clip and its mounting plate on a brown surface with a label.

    Delco Distributor Cap Spring Clip AB-488SD (Display)

    $12.00
    673
    Distributor Cap Spring Clip AB-488SD AB-488SD is a Delco distributor cap spring clip with the shorter bracket. It includes 1 spring clip, 1 bracket, 1 screw, and 2 washers. The bracket measures .700"...
    Add to Cart
  • Delco Distributor Cap Spring Clip With Longer Bracket, metal splitter clip with extended bracket for distributor cap

    Delco Distributor Cap Spring Clip With Longer Bracket (Display)

    $12.00
    672
    Product Overview Distributor cap spring clip with a 1" long bracket, one screw, and two washers. Longer bracket than the bracket in ABC488S. Fits Allis Chalmers: B, IB, C, CA, G, RC, WC, WF, WD,...
    Add to Cart
  • Allis-Chalmers Cap Screw Bolt & Block 70202132, display image of a used bolt, a rectangular metal block with a hole, and a label indicating part number 665.

    Allis-Chalmers Cap Screw Bolt & Block 70202132 (Display)

    $11.00
    665
    Cap screw, bolt, and block for fuel tank and radiator straps. Sold individually and supplied as 1 screw and 1 mounting block. Part Number: 70202132 Fits Allis Chalmers - B (prior to SN B-58401), IB,...
    Add to Cart
  • Allis Chalmers Gear Shift Lever Washer and Snap Ring Kit, display showing a black washer and a rusty snap ring on brown background with 'USED PARTS / DISPLAY' label.

    Allis Chalmers Gear Shift Lever Washer and Snap Ring Kit (Display)

    $11.75
    655
    Allis Chalmers gear shift lever washer and snap ring kit that retains the gear shift lever into housing. Part Number: AC-254D Fits Allis Chalmers G Allis Chalmers B Allis Chalmers C Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899, display of a metal tube stand pipe on a brown background with a label underneath reading '637 USED PARTS / DISPLAY'.

    Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899 (Display)

    $15.75
    637
    Allis-Chalmers oil filter tube element stand pipe for the listed Allis-Chalmers and AC Misc. applications. Part Number: KI1189 Fits Allis Chalmers - G, B, C, CA, IB, RC, WC, WF, WD, WD45, D10, D12,...
    Add to Cart
  • 6 Volt Voltage Regulator for Allis-Chalmers, black rectangular display unit with electrical terminals on the side, used parts display

    6 Volt Voltage Regulator for Allis-Chalmers (Display)

    $34.25
    634
    6 volt external voltage regulator for selected tractors and generators. For positive ground systems with an A-type circuit and 7 to 9 amp output. Part Number: AB-153D Fits Allis Chalmers - B, C, CA,...
    Add to Cart
  • Universal Ammeter Gauge (20-0-20), display of black meter with white markings and needle indicating current in amperes.

    Universal Ammeter Gauge (20-0-20) (Display)

    $15.75
    623
    Universal ammeter gauge with a 20-0-20 range and chrome bezel. Compatible with Allis-Chalmers, Case, Cockshutt, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver...
    Add to Cart
  • Allis-Chalmers 6 Volt Generator Cut Out Relay Assembly, display view showing electrical relay with metal mounting brackets and 6V label.

    Allis-Chalmers 6 Volt Generator Cut Out Relay Assembly (Display)

    $22.25
    631
    6 volt generator cut out relay assembly for the listed tractor applications. For Autolite and Delco generators with mounting tabs parallel with cut out. Part Number: AB-015D Fits Allis Chalmers: B,...
    Add to Cart
  • Universal Ammeter Gauge (20-0-20), analog display of current in amperes with a needle and a black faceplate with measurement markings.

    Universal Ammeter Gauge (20-0-20) (Display)

    $15.75
    630
    Universal ammeter gauge with a 20-0-20 range and chrome bezel. Compatible with Allis-Chalmers, Case, Cockshutt, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver...
    Add to Cart
  • Allis Chalmers Amp Gauge, round meter displaying current ampere readings with 'Charge' and 'Discharge' indicators.

    Allis Chalmers Amp Gauge (Display)

    $23.75
    629
    Allis Chalmers amp gauge with a chrome bezel and restoration quality finish. Fits the Allis Chalmers models listed below. Part Number: AC-258D Fits Allis Chalmers: B, C, CA, G, WC, WD, WD45, WD45D,...
    Out of stock
  • Ammeter 60-0-60 AMP Gauge 2-inch Diameter (Display), round analog current meter for measuring electrical current with black face and red needle.

    Ammeter 60-0-60 AMP Gauge 2" Dia (Display)

    $18.50
    627
    Universal 60-0-60 AMP ammeter gauge with a 2" dia. hole fitment. Condition: New. Part Number: AMG60 Fits Allis Chalmers - 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 2RCP, 4650, 4660,...
    Add to Cart