Hitches & Drawbars

ITEM # DJS313 Allis Chalmers Rivet For Snap Couplers Used to attach springs Sold Individually

Allis Chalmers - CA, 190XT, D10, D12, D14, D15, D17, D19, WD, WD45, 190; Replacement for: 70327360, 70235881, 327360, 235881 3-1/4" OVERALL LENGTH4 USED PER TRACTORSOLD INDIVIDUALLYCA used a different spring that is no longer available but this spring...

Allis Chalmers - 190XT, D10, D12, D14, D15, D17, D19, WD, WD45, 190, Some Parts Also Fit: CA ((Spring #327360, Rivet #917923, & Washer #910532) ); Replacement for: (screw rivet): 917923, (jam nut): 918935, (washer plain): 910532, (set screw): 900662,...

Allis Chalmers - B, IB, C, CA, WD, WD45, D10, D12, D14, D15, D17, D19 with quick hitch system Replaces: 70226514, 226514

Allis Chalmers - Fits various models Hydraulic Lever & Brake Release Knob 1-1/4" Diameter, 3/8" - 24 Thread

Allis Chalmers - Fits various models Hydraulic Levers & Brake Release Knob 3/8" - 24" Thread, 1-3/8" Diameter

Item # MI-119DAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliver3-POINT EQUIPPED TRACTORS/IMPLEMENTS USING 7/16" DIAMETER PINS.420" DIA PIN - 1-5/8" USEABLE LENGTH - 1-5/8" DIA RINGcross reference mis119

Item # AB-1433D Allis Chalmers: Various Avery: Various Case: Various Cockshutt: Various Ford: Various IH / Farmall: Various John Deere: Various Massey Ferguson: Various Massey Harris: Various MM: Various Oliver: Various Use on tractors with Category 2...

ALLIS CHALMERS - CA, WD, WD45, D10, D12, D14, D15, D17 SERIES I II III (NOT SERIES IV) Clevis Pin Locating Guide 70220873 Cotter Pin / R-Clip 70922002 Clevis pin & R-Clip for Drawbar Hanger / Draw Bar Cradle

Allis Chalmers - D10, D12, D15 Lift Arm Clevis - Requires 2 per Tractor Replacement - 70235820, 235820

Allis Chalmers - D10, D12, D15 Hitch Lift Rod - Requires 2 per Tractor Replacement - 70235823, 235823

Allis Chalmers B, C Drawbar / Hitch Brace Pair 70506023 Allis Chalmers - B, C Replacement - 70506023 Made to OE Specifications

Allis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT HITCHCase: 730, 830, 930, 1030, 770, 870, 970, 1070, 1170, 1175, 1090, 2090, 2290; and OTHER MODELS USING CAT 2 THREE POINT HITCHCockshutt: 560,...

AGCO Tractor - 4650 (and OTHER MODELS USING CAT 1 THREE POINT HITCH) Allis Chalmers - [ D10, D12, D14, D15, ED40, I40, I400, I60, I600, 160, 5015, 5020, 5030, 5040, 5045, 5050, 6040, 6140 (and OTHER MODELS USING CAT 1 THREE POINT HITCH) ]Deutz - [ D2505,...

Allis Chalmers - D10, D12, D15, and other models with Category 1 3 Point Lower Lift Arm Heavy Duty - Requires 2 per Tractor Category 1 7/8" diameter 31-3/4" center to center of ball MUST DRILL HOLE IN ARM FOR CLEVIS PIN

Allis Chalmers - G Tractor (SN 26751 & Up)Replacement - 70800836, 800836Fits Drawbar KI1082 (70800456)

Allis Chalmers - LIKE ORIGINAL ON G (up to sn 26750); FUNCTIONAL ON G (sn 26751 and up) MADE IN USA, 21-3/16" LONG Replacement part for: 800455, 70800455

Allis Chalmers: WD, WD45Replacement for: 223187, 226522

Allis Chalmers - D17, D19, 180, 185, 190, 200, Early 7000 Red Belly Lift Arm Housing Gasket - OEM AGCO Brand Replaces - 70237584 237584

Allis Chalmers - CA, D10, D12 Replacement - 70226658, 226658 Comes Primered

Allis Chalmers: GMADE IN THE USAReplacement part for: 800454

Allis Chalmers - D10, D12, D15 Trunnion Lift Rod - Requires 2 per Tractor Replacement - 70234884, 234884

Allis Chalmers - D10 (SN 3501 & up), D12 (SN 3001 & up) Replacement - 70236375, 236375 Drawbar Hanger / Bail Assembly for Retractable Drawbar with 3 Point Hitch Note*** D10 and D12 Series III (SN 9001 & up) Mounting Hole Need To Be...

Allis Chalmers - D10 (SN 3501 & up), D12 (SN 3001 & up) Replacement - 70236371, 236371 Retractable Drawbar for 3 Point Hitch Overall Length 33"

ALLIS CHALMERS - B, IB, C   ALLIS CHALMERS DRAWBAR EXTENSION PLATE ADD ON. USE WITH TRACTOR WITH HORSE SHOE SHAPED DRAWBAR. ALLOWS YOU TO USE PTO SHAFT IMPLEMENTS BEHIND TRACTOR.   70215512,, 215512 MADE IN THE USA

Allis Chalmers - G Tractor (SN 26751 & Up) Replacement - 70800456, 800456 If Drawbar Clip / Bracket is needed purchase KI1083 (70800836)

Item # AB-1427D Allis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliver FOR TRACTORS USING CATAGORY 1 3PT WITH 4-3/4" USEABLE LENGTH. 3/4" OD - 4-3/4" useable length - 6-1/2" overall lengthReplacement for: John...

ALLIS CHALMERS - D17 SERIES I, II, III (WILL NOT WORK ON D17 SERIES IIII) TOP LINK BRACKET FITS BETWEEN THE SEAT AND THE TRANSMISSION KI1239 MADE IN THE USA

Allis Chalmers - CA Replaces - 225138 70225138 Drawbar Pivot Pin - 7" Long 0.872" Diameter Shaft

ALLIS CHALMERS - CA, D10, D12 AFTERMARKET SNAP COUPLER DRAWBAR MADE IN THE USA