Allis Chalmers Parts

Allis Chalmers - D17, D19, 170, 175, 180, 185, 190, 200, Early 7000 Red Belly Lift Arm Housing Gasket Replaces - 70237584 237584  

Allis Chalmers - WD, WC, WF 4-1/8" Over Bore - Kit includes Pistons, Sleeves, O-Rings, Piston Rings, Pins Replacement - 70283616, 283616

Allis Chalmers - G Connecting Rod Bearing for some N62 Continental standard 1.500" rod journal and horizontal split rod caps. Sold and Priced per journal. *Measure before ordering; NO return if package has been opened. Replaces - 70800499, 800499,...

ALLIS CHALMERS - D17 I, II, III,  D19 with snap coupler hitch LIFT ARM SEAL KIT ( 3 PIECES) FOR 1 CYLINDER

Allis Chalmers: D10, D12, D14, D15, D17, D19

Allis Chalmers - G Replaces 70800304, 800304, 70800299, 800299 Massey Harris - Pony Replaces (manifold to cylinder head): 1500074M1; (carburetor to manifold): 850082M1Includes carburetor gasket  

Various Models Raincap Painted In High Temp Paint To Match Restoration Muffler Muffler Part # AC-3156D This raincap fits mufflers and exhaust pipes with 1.500" to 1.600" O.D. range

Allis Chalmers - D19 Gas Replaces: 70236594, 236594 Upper Radiator Hose

Allis Chalmers - D Series Tractors 1 inch snap in plug - Key Ignition Switch

 80" Tachometer Cable W/ Square Drive On Ends Allis Chalmers - 180, 185, 190, 190XT, 200 (with generator driven tachometers) ; Replacement for 257353, 70257353 International - 666 (Dsl; wi/D310 engine), 766, 806, 856, 1026, 1206, 1256, 3088, 3288,...

Allis Chalmers - WC, WF, RCReplacement -70277526,209863 One kit lines one Side - When you order quantity of 1, you will receive enough to service one Wheel

Allis Chalmers - D14 with oval model letters (1957-1959)Vinyl Die Cut

Allis Chalmers - [ WD, WD45, WF,WC (ALL with Gas, Diesel, LP) ]; Replaces: 204838, 207199, 210298, 219646, 226764, 227074, 70226764, 70227074 New Clutch Disc -- 10" Outside Diameter, 1-1/4" Hub - 10 Spline --

Allis Chalmers - 180, 185, 190 9 Piece Power Steering Cylinder O-Ring and Seal Kit Replaces - 70255712-5, 255712-5

Allis Chalmers: B 1937-1957 (BLACK)BEST ON THE MARKET!!! USA MADE. NO REFUNDS ON VINYL CUT DECALS. STORE IN A COOL, DRY PLACE. DO NOT SOAK IN WATER.

Allis Chalmers - 180, 185, 190 Gas (G2500 Gas SN < 2G-05728), 190XT Gas (G2500 Gas SN < 2G-05728) Replaces - 70243021, 243021 Fan Belt: 53.25" Length, 0.4" Thick, 1/2" Width

Allis Chalmers - WD, WD45, D17 (up to sn 42000)0.752" OD - 6-5/8" Overall length - 2 used per tractor - sold in set of 2- USA MADEReplaces: 217599, 232801, 70217599, 70232801STAINLESS STEEL

Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series l, 190XT Series II, 200, 210, 220, 220FWA, I-40, I-400, I-60, I-600Avery: various Case: C, CC, D, DC, DI, DO, L, LA, LAI, RC, S, SC, SI, SO,V, VC, VI, VO, VAC, VAH,...

Allis Chalmers - variousCase - various Cockshutt - variousFord - 2000 3 Cylinder, 2000 4 cylinder, 4000 4 Cylinder, 601, 701, 801, 901 (Ground strap); Replacement for: D1NN14301G International - Super H, Super HV (Ground strap, up to sn 19233), A, AV, B,...

Allis Chalmers - WD, WD45, WD45 Diesel Belt Pulley Gear Housing Cover Cork Gasket - OEM AGCO Brand Replaces - 70202765, 202765

Allis Chalmers - 170, 175 (Both Gas)Replacement - 70249760, 249760Lower Radiator Hose

Allis Chalmers - 180, 185, 190, 190XT, 200, 210, 220, 220 FWAAll White on Wood

Allis Chalmers - RC, WC, WD, WD45 (Gas & LP Only, (Wont Fit DSL.)), WF Replaces: RH: 70277274, 227274 LH: 70227273, 227273 KIT CONTAINS ONE EACH OF LH & RH SIDES - FOR FRONT WEIGHT

 Allis Chalmers - B, IB, C, CA Replaces: 70207840, 207840 - Oil Pump Gasket Seal -

The only newly manufactured oil-filled seat shock available. Competing products use air shocks built for automotive suspension, not tractors. Direct-fit rear seat shock absorber for tractors equipped with Monroe or Monroe Easy-Ride seats. Replaces OEM...

Allis Chalmers - 180, 185, 190, 190XT, 200, 210, 220, 220 FWAWhite and Black on Steel

Allis Chalmers - Various Models Minneapolis Moline - R, Z (using FM-J4, FM-JV4, FM-X4, FM-XE4, FM-XV4, FM4B, FM-ZV4) FAIRBANKS MORSE MAGNETOS: FM-J4, FM-J4A, FM-J4B, FM-OX4, FM-B1 Also fits the following 2 piece cap designs: FM-J4, FM-J4A, FM-J4B,...

Allis Chalmers -  CA, WD, WD45, D10 (up to SN: 9199), D12 (up to SN: 9167), D14, D15 (up to SN: 9000), D17 (up to SN: 75000), D19 Nut and sleeve kit for 1/4" steel hydraulic line to the Traction Booster Gauge (AC-124D)* Your steel line must be...

Allis Chalmers: D19 GasFordIH / Farmall: IH models with IH carburetorsJohn Deere: A, AR, B, BR, D, G, GM, GP, HMassey FergusonMassey HarrisMMOliver Gasket measures 2-15/16" from center of one bolt hole to the center of the other bolt hole. Center hole...

ALLIS CHALMERS - B, IB, C, CA, D10, D12, D14, D15 CLUTCH ALIGNMENT TOOL 10 SPLINE OD = 1-1/8"OD2 = 1 3/4"Pilot OD = 0.670"Spline Count = 10Spline Count 2 = 10  

Allis Chalmers - 190, D21, D19, D17 (SN: 42001 & up), D15 (SN: 9001 & up), D12, D10, 190XT (Up to SN: 19000) Case -900, 600, 500, 400, SC, LA, DC Cockshutt - 50 Blackhawk, 50, 40PD Golden Eagle, 40D4 Golden Eagle, 40 Blackhawk, 40, 35 Blackhawk,...

Allis Chalmers - D10 (sn 3501 and up), D12 (sn 3001 and up), D14 (sn 19001 and up), D15 GAS, I60, I500, I600 116 TEETH Replacement for: 233196, 70233196

ITEM # WC001 Allis Chalmers - Early WC (with side exhaust) 4 pcs = 3/8-16 x 3-1/2 Manifold Studs 2 pcs = 3/8-16 x 4-1/2 Manifold Studs 6 pcs = 3/8-16 Brass Nuts

Allis Chalmers - Landhandler Vinyl Decals Set of 2 12" Long by 1-3/4"

Allis Chalmers - D10 (Up to SN 3501), D12 (Up to SN 3001), D14 (Prior to engine 149-19070, Prior to tractor SN 9001) Replacement - 70228188, 228188 Clutch Pilot Bushing

Allis Chalmers: WD, WF, WC, D19 Dsl (up to engine D-03046), D15 Dsl (up to engine D-03046) Avery: Various Case: VAC, VAI, 200, 300, 300B, 310, 320B, 420B, 420 Crawler, 430, 500B, 530, 600B, W3, W5, W5A Loader Ford: 501, 600, 700, 800, 900, 2000 (4 cyl),...

Allis Chalmers - 170, 175 (Both Gas) Replacement - 70249759, 249759 Upper Radiator Hose

Allis Chalmers: B 1937-1957 (BLUE)BEST ON THE MARKET!!! USA MADE. NO REFUNDS ON VINYL CUT DECALS. STORE IN A COOL, DRY PLACE. DO NOT SOAK IN WATER.

The Allis Chalmers CA Step is a must-have accessory for any Allis Chalmers CA tractor owner. Designed to easily mount to the left side of the torque tube, this step provides convenience and safety, allowing you to easily access your tractor with ease...

Allis Chalmers - D10, D12, D14, D15, D17, D19, D21; WILL ALSO FIT 170, 175, 180, 185, 190, 190XT, 210, 220 If using 2-piece seat without arm restsIncludes metal seat pan and seat cushions. These cushions are wood backed. A great seat option at a fraction...