All Other Steering Parts

Allis Chalmers - WD, WD45, D14, D15, D17, (D10 Sn# 3501-9000 High Clearance Only, D12 Sn# 3001-9000 High Clearance Only), WC (Tricycle and Sn# 23529 and up with hub #206342 or Sn# 41388 and up with Hub #211995) Replaces - 70206343, 70276820, 0206343-6,...

Allis Chalmers - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Spindle Thrust Washer Replaces - 70267296, 267296

Allis Chalmers Tractor - WD, WD45, WD45 Diesel, D10, D12, D14, D15, D19, 175, 180, 185, 190, 200,  D17 (early models with 5 bolt hub), 170 (late models), 6060 (with 96" standard tread), 6070 (with 96" standard tread), 6080, 7000 (early...

Allis Chalmers - D21, 210, 220 2-Piece Wheel Hub Seal Kit - Contains Part #'s 70239446 and 70239462 - OEM AGCO Brand Replaces - 70239435, 239435, 70239446, 70239462

Allis Chalmers - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Lower Spindle Bushing Only - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 (1 Per Spindle, 2 Per Tractor) - See AC-5365D for Upper bushing...

Allis Chalmers - D21, 210, 220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Upper & Lower Spindle Bushing - D21, 210, 220  (2 Per Spindle, 4 Per Tractor) Upper Spindle Bushing Only - 7010, 7020, 7030, 7040, 7045,...

ALLIS CHALMERS - WD, WD45, D10 (SN 3501 & UP), D12 (SN 3001-9000), D14, D15 (UP TO 9001), D17 (UP TO 42001)    

ALLIS CHALMERS - D21, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070   Front Wheel Hub 8 Lug   WHEEL BEARINGS FOR THIS HUB ARE PART NUMBER WBKAC3   70265167, 265167    

Allis Chalmers - D10 (w/ 5 bolt front hub SN: 3501 & up and High Clear up to SN: 3501), D12 (w/ 5 bolt front hub SN: 3001 & up and High Clear up to SN: 3501), D14 (w/ 5 bolt front hub, Wide Front Only), D15 (w/ 5 bolt front hub up to SN: 9001),...

ALLIS CHALMERS - D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080 THREADED HUB CAP CROSS REFERENCE - 70220403  

ITEM # 70800165 ALLIS CHALMERS - G   REAR AXLE COLLAR FOR THE ALLIS CHALMERS G. HOLDS AXLE, AXLE SEAL, AND BEARING IN PLACE IN AXLE TUBE. 1 REQUIRED PER AXLE. (THIS PART IS NLA "NO LONGER AVAILABLE FROM AGCO" ALLIS CHALMERS)   CROSS...

Allis Chalmers - D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000 AC Misc - I60, 615, I600, (500, 600 Forklifts) Replacement - 70261418, 261418 Front Wheel Hub 6 Lug, 6" Bolt Circle, 4.620" Pilot Hole For use with threaded...

Allis Chalmers - D17, 170, 175, 180, 185, N7 Combine O-Ring Bearing Carrier sold as a pair, 2 used per tractor.   8050 uses 2 on the hydraulic pump housing 8070 uses 2 on the hydraulic pump housing   OEM AGCO Replacement - 70923820    

Allis Chalmers - D14, D15 (used as a vertical splined steering shaft seal, fits Manual or Power steering; Replaces: 227850, 229726, 229967, 70227850, 70229726, 70229967 International - [ B-450, BM, BMD, M, MD, MDV, MTA, MTAV, MV, Super M, Super MD, Super...

Allis Chalmers - D21 (Steering Shaft Support Bushing; 1 required per tractor), [D14, D15, D17, D19 (Steering Shaft Support Bushing; 2 required per tractor)], [180, 185, 190, 190XT, 190 XT III, 200, 210, 220, 220 FWA (Steering Shaft Support Bushing; 2...

Allis Chalmers - D19, [190, 190XT, 190XT III (Prior to SN 9001)]Replacement - 70235312, 2353121 Required per side, 2 Required per Tractor, *Sold Individually*

Allis Chalmers - G Replaces - 70800445, 800445These Drive into Hub like Conventional Seals - 2 used per tractor, sold individually.0.320 Thick, 2.130 O.D., 1.120 I.D. For Spindle O.D. of 1.188

Allis Chalmers - WD, WD45, WD45 Diesel Front Tricycle Upper Spindle Shaft Seal - Replacement for: 70202102, 202102 Measurements: 2.375" OD, 1.715" ID, 0.310" Wide

Allis Chalmers - B,IB,C,CAFront Tricycle Lower Steering Spindle Shaft Seal - Replacement for: 70210289, 210289Measurements: 2.760" OD, 1.670" ID, 0.313" Wide

Allis Chalmers - B, IB, C, CAFront Tricycle Upper Steering Spindle Shaft Seal - Replacement for: 70210293, 210293Measurements: 1.953" OD, 1.330" ID, 0.340" Wide

Allis Chalmers - D14, D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 220 FWA, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 8010, 8030, 8050 Gleaner Combines - L-Series Prior to SN 13000, M-Series OEM...

Allis Chalmers - WC, WD, WD45 Replaces - 70202101, 202101 Made of Cork Front Pedestal Lower Spindle Shaft Seal

Allis Chalmers - WD, WD45, D10, D12 High Crop, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200 4 Used Per Tractor Sold Individually

Allis Chalmers - D17 (SN# 42001 & Up W/ 6 Bolt Hub), D15 (SN# 9001> W/ 6 Bolt Hub) , D19, 190, 190XT, 180, 185, 170, 175, 160, 160D, 200, 6060, 6070, 6080, 7000, I-60, 615, I-600, 500, 600 Inner & outer cone & cup, seals/felts, retainers...

Allis Chalmers - RC, WC, WF AC Motor Grader - W (Speed Patrol) Replaces: 202533, 016729, 79016729, 70202533, U2533 2 used per tractor, sold individually. ***0.795 wide, 9.975 O.D., 8.550 I.D.Rear Axle Final Drive Rubber Seals

Allis Chalmers - G; Replaces: 800097PRIMED - 50-1/2" LONG X 1-1/2" OD - - DOES NOT INCLUDE BUSHING

Allis Chalmers: B, IB, C, CA, D10, D12 Ford: With Standard adjustable wide front, not for H.D. Axle - Upper and lower - 9N, 2N, 8N, NAA (1939-1954) - Upper only - 501, 600, 700, 800, 900 Series, 2000 (4 cyl), 4000 (4 cyl), Dexta (1955-1964); 2000 (3...

Allis Chalmers - B, C, CA, G, IB; Replacement for: 207218PRIMER

Allis Chalmers - B, C, CA, IB, G WITH ROSS STEERING BOX TO FIT ORIGINAL TUBE MUST SAND APPROXIMATE .005 OFF O.D. OF BUSHING 1-3/8" OD -- 3/4" ID Replaces - 210475

Allis Chalmers - C (With Ross Steering Box); Replacement part for: 219390PRIMER - - 40" OVERALL X 1-1/2" OD - - DOES NOT INCLUDE BUSHING

Allis Chalmers - B (With Ross Steering Box); Replacement part for: 210472, 206765PRIMER - - 39-5/8" LONG - - 1-1/2" OD - - DOES NOT INCLUDE BUSHING

Allis Chalmers: Used as a PTO output shaft retainer seal on following models: WC, WF, RC - Used as a PTO gearbox stub shaft seal prior to 1935 on following models; WC, WF - Used as a belt pulley drive seal on following models: WC (prior to sn 74330) - WF...