Hydraulics

Allis Chalmers - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580 Fleetguard Differential Return Hydraulic Filter Replaces - 70269922, HF6071

Allis Chalmers - D15, D17 (From SN#68628), D19 (From SN#12021), D21, 180, 185, 190 (up to SN#25518), 190XT (up to SN#25518) Fleetguard Engine Oil Filter Replaces - 70239930 , LF581

Allis Chalmers - 4W220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Hydraulic Oil Pressure Switch Replaces - 70268784, 268784 2.590" overall length, 1/4" spade terminal, 1-1/16" hex, 1/8" NPT, 0.160" inside diameter, 12 PSI

Allis Chalmers - D10 (as a choke knob), D12 (as choke knob)D14, D15 (as hydraulic spool valve knob, 2 to 3 used), D14 (as choke knob), D14, D15 (as a hydraulic selector valve knob)D17 (as hydraulic spool valve knob, 2 to 3 used), D17 (as hydraulic...

Allis Chalmers - [170 (SN# 7500 and up), 175 (SN# 2035 and up) Connects inlet tube to sump cover], [210 and 220 Connects the hydraulic line to the rear axle] Replaces - 70254733, 254733 Measurements - 2.7" Long, 1.46" ID large end, 1.22" ID small...

Allis Chalmers - 180, 185, 190 (Diesel, SN 26857 & up), 190 (Gas, SN 26855 & up), 190XT (Diesel, SN 26612 & up), 200 Replaces - 70249438, 249438 1.50" (1-1/2") ID Hydraulic Intake Hose has a spring coiled inside.  

Allis Chalmers - D21, 190 (Diesel, up to SN 26857), 190 (Gas, up to SN 26855), 190XT (Diesel, up to SN 26612), 210, 220 Hydraulic Hose, Filter to Pump - 1.485" ID on both ends -  

Allis Chalmers - D17, D19, 170, 175, 180, 185, 190, 200, Early 7000 Red Belly Lift Arm Housing Gasket - OEM AGCO Brand Replaces - 70237584 237584

Allis Chalmers - D14, D15, D17, D19 Hydraulic Pump Screen Gasket - OEM AGCO Brand Replaces - 70233249, 233249

Allis Chalmers - WD, WD45, WD45 Diesel Hydraulic Pump Cover to Pump Body Gasket - OEM AGCO Brand Replaces - 70222579, 222579

Allis Chalmers - 180, 185 Power Director Manifold Gasket - OEM AGCO Brand Replaces - 70247266 247266

ALLIS CHALMERS - D10, D12   HYDRAULIC PUMP COVER TO HOUSING GASKET   70222578

Allis Chalmers -  CA, WD, WD45, D10 (up to SN: 9199), D12 (up to SN: 9167), D14, D15 (up to SN: 9000), D17 (up to SN: 75000), D19 Nut and sleeve kit for 1/4" steel hydraulic line to the Traction Booster Gauge (AC-124D)* Your steel line must be...

ALLIS CHALMERS - D14, D15 TRANSMISSION HOUSING TO LIFT ARM HOUSING GASKET 9OEM) 70233246, 233246

ALLIS CHALMERS - D17 IV, D19, 170 GAS, 175 GAS OIL PRESSURE SWITCH / SENSOR HYDRAULIC FILTER PRESSURE D17 IV, D19 170 GAS 17 GAS OIL FILTER BASE 170 175

ALLIS CHALMERS - D19 Lift Cylinder Seal 70235185

Allis Chalmers - B, IB, C RAM SEAL KIT ASSEMBLY (5 PIECE) FOR TRACTORS WITH 3/4" RAM (ROD) & 1 1/4" BORE (1) 70212416 (3) 70212418 (1) 70212417    

ALLIS CHALMERS - D17 I, II, III,  D19 with snap coupler hitch LIFT ARM SEAL KIT ( 3 PIECES) FOR 1 CYLINDER

Allis Chalmers - D17 Series IV, 170, 175, 180, 185, 190, 190XT, 200, 8550, 4W-305, 7000, R40, R50, R5, R6, R7, R60, R70, N7 Replacement -70253347, 253347, 70253346, 253346  Kit contains 1-70253347 Seal (3.00" ID), 1-70253346 Wiper  

Allis Chalmers - D10, D12 [Will Work On All Series] Replacement - 237562 70237562 Hydraulic Pump Intake Hose Note: There was 2 different hose designs used for the D10 and D12 tractors, this hose will replace either design.