ALLIS CHALMERS WD45 PARTS

Allis ChalmersCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliverSame applications as part number AB-418D alternator.670" Shaft diameter, 2-1/2" pulley OD, 5/8" belt width

Allis Chalmers - WD, WD45 Exact Fit for Allis Chalmers WD and WD45 Tractors. Lacquered Braided Cotton Cloth Cover over modern insulated pure copper wire core (non-resistor wire).  Made and Assembled in the USA to Original Length and Style (there...

Allis Chalmers - 190XT, D15 (Gas (SN: 9001 & up), & All Diesel), D17 (Gas (SN: 42001 & up) & All Diesel), D19 (Gas (SN: 12001 & up) & All Diesel), D21, U, UC, WD45, 170, 175, 180, 185 (Diesel), 190; Replacement for: 70237947,...

Allis Chalmers - WD45 AN OPERATOR'S MANUAL (REPRINT) SOMETIMES REFERRED TO AS THE OWNERS MANUAL THE MANUAL THAT CAME WITH THE TRACTOR. THIS IS THE MANUAL THAT WAS GIVEN TO THE CONSUMER BY THE MANUFACTURER. MANUAL GIVES THE OWNER-OPERATOR INSTRUCTIONS,...

Allis ChalmersAveryCaseCockshuttFord: Ford models except Dexta and Fordson MajorIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliverGauge has Chrome bezel and fits most tractors equipped with alternator - NO LOGO - Fits A 2" Diameter hole

Allis Chalmers: variousAvery: variousCase: various Cockshutt: variousFord: variousIH / Farmall: IH 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 John Deere: variousMassey Ferguson: variousMassey Harris:...

Allis Chalmers: VARIOUS - SERVICEABLE FOR AC GCaseCockshuttFord: 9N, 2N; 1939-1947IH / FarmallJohn DeereMassey Ferguson: Front only, not rear - POWER STEERING CYL ENDS: TE20, TEA20, TO20, TO30, TO35, MF35, MF20, 35, 135, 202, 203, 205, 230, 235, 2135,...

Allis Chalmers - [ WD, WD45 (Gas/Lp with 1 wire 12-volt alternator; AB-418D) ] Includes light wires and diagram. Original style braiding with soldered terminals. Restoration quality.

Allis Chalmers - B, IB, C, CA, RC, WC, WD, WD45, WF Water temperature gauge has a white face and a Black Needle with the Allis Chalmers name, and is like original. Gauge screws into the radiator neck. Brass stem length of this gauge is 2.048". Gauge...

Allis Chalmers - WD45 Dsl, D17 Gas (up to sn 42000), D17 Dsl (up to sn 38963) INLET 2.275" I.D. BASE - O.D. OF CAP 4.94" DIAMETER Replacement for: 70226926, 226926 cross reference acs226  

Allis Chalmers - WD, WD45, WC, WF, B (up to engine serial # BE-51352 or CE-4660), C (up to engine serial # BE-51352 or CE-4660), IB (up to engine serial # BE-51352) Governor Rod Linkage Spring Replaces - 70203208, 203208

Allis Chalmers - WD, WD45 Hydraulic Control Decal (Traction Booster) -- Mounts on side of battery box -- A-2-269

Straight fitting for sediment bowl fitting. For use on D14 and D15 fuel line. 1/4" Flare To 1/8" Pipe (Brass)  

Allis Chalmers: Engine Oil Cap: G Auxiliary Gas Tank Cap: B, C, CA, U, WC, WF, WD, WD45, D14, D17 Power Steering Cap: WD45 (GAS / DSL) IH / Farmall: Starting Tank Fuel Cap with Gasket: Fits as alternate to IHS577 but does not have correct...

Allis ChalmersCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliver Metal shethed Length = 72" Note: Cut to length - Can also be used as a 'STOP" cable for diesel engines Various tractors, forklifts, and other applications using...

Allis Chalmers - B, C, CA, G, RC, WC, WD, WD45 Dsl Diesel, WF This manual is a reprint of the manual that the factory furnished the dealers service department, service manual deals with repairs in the language of a mechanic. The manual includes valuable...

Allis Chalmers - WD, WD45, WD45 Diesel Front Tricycle Upper Spindle Shaft Seal - Replacement for: 70202102, 202102 Measurements: 2.375" OD, 1.715" ID, 0.310" Wide

 Allis Chalmers: C, CA, WC, WF, WD, WD45, RCFord: 9N, 2N, Early 8NJohn Deere: A, B, D, G, H, AR, BRMassey Ferguson: TEA20, TE35, MF35, TE20, TO20, TO30, TO35, 40, 50Massey Harris: 50MM: SINGLE BOLT MOUNT, 9 HOLE, 19" DIAMETER IS SERVICEABLE FOR THE...

Allis Chalmers - WD, WD45, RC, WC (SN- 74330 & up), WF (SN- 1904 & up) 2 used per tractor - sold individually Grill Screen material measures 19-1/4" length x 9-1/4" width

Allis Chalmers - (WD, WD45, 170, 175, D17 all Gas & LP), (WC, WF all Gas & LP models above engine SN 72459 with 15 stud head) Timing Gear Cover Gasket - 0.032" thick, 7 mounting holes, 7/16" mounting hole ID Replaces - 70233214, 233214

Allis Chalmers - WD, WD45, WD45 Diesel Hydraulic Pump Cover to Pump Body Gasket - OEM AGCO Brand Replaces - 70222579, 222579

Item # MI-119DAllis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey HarrisMMOliver3-POINT EQUIPPED TRACTORS/IMPLEMENTS USING 7/16" DIAMETER PINS.420" DIA PIN - 1-5/8" USEABLE LENGTH - 1-5/8" DIA RINGcross reference mis119

Allis Chalmers - G, WD, WD45, B, C, CA, D10, D12 (up to sn 9001), D14 (up to sn 19000) ; Replacement for: 223715, 70223715 International - A, AV, C, Cub, Cub Loboy (DOES NOT FIT 154, 184, 185), H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, O4, O6, ODS6,...

Allis Chalmers - D17 (gas, LP; SN: 19978 and up) 170, 175 (gas, LP);Cottonpicker: 616 (gas), Road Grader: D, DG, M65 (gas);E, EIII (gas); Replacement for: 229953, 70229953 3 piece set. usable for: D17 up to SN: 19978, WC, WD, WD45, WF all gas / LP;...

Allis Chalmers - WC, WF, WD, WD45, D17, D17 Series IV Distributor & Magneto Drive Gasket Replaces - 70233217, 70277101

Item #WH-050D Allis Chalmers Avery Case Cockshutt Ford IH / Farmall John Deere Massey Ferguson Massey Harris MM Oliver FOR 5.50, 6.00, 6.50 x 16" TIREScross reference WHS050

ITEM # AC-2678D Allis Chalmers - WD, WD45, WD45 (Diesel); Replacement for - 70222650 cross reference ACS2678

Allis Chalmers - B, C, CA, D10, D12, D14, D15, D17, IB, WC, WD, WD45, WF, 170, 175, Industrial: 500, 510, 512, 610, 612, H3, I40, I400, I60, I600;Combines - E, EIII, 66, 72, 90; Cotton Picker: 616, 622, Industrial: D, DG, M65, TL10, TL11, TL12, TL6 ,...

Allis Chalmers - WC, RC, WF, WD, WD45 Gas 100 teeth Replacement for: 208132, 70208132

Item # AB-419DAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliverInsulated, 2 gauge length = 27", Eyelet opening 38" - Heavy duty straight terminals - If a supply issue occurs, this may be a 2 gauge cablecross...

Allis Chalmers: Following using the original switch (208197) and cutout system: B, IB, C, CA, G, RC, WC, WF, WD, WD45 Gas (up to SN: 201241)Case: VA (up to SN: 5060679), VAC (up to SN: 5060679), VAH (up to SN: 5060679), VAI (up to SN: 5060679), VAO (up...

 Allis Chalmers - WD, WD45 Same gauge, weight, and material as original equipment Replaces - 224935, 70224935

Allis Chalmers: Various Avery: Various Case: Various Cockshutt: Various Ford: Various IH / Farmall: Various John Deere: M, MC, MT, MI, 40, 320, 330, 420, 430, 440, 1010, 2010 Massey Ferguson: Various Massey Harris: Various MM: Various Oliver: Various CUT...

Item # AC-1762D Allis Chalmers: Styled WC, WD, WD45, Early D17 gas Also fits B, C, CA, RC if you trim approximately 1" off the length and redrill one hole if needed. cross reference acs1762

Allis ChalmersMM: R, Z (using most multi-cylinder FM series)FAIRBANKS MORSE MAGNETOS: FM-J4, FM-J4A, FM-J4B, FM-JE4, FM-X4, FM-XE4, FM-X4B7A, FM-B1, FMJ2B6D, Y79MOST MULTI-CYLINDER FM SERIES MAGNETOS

Allis Chalmers - [ B, IB, C, CA, G, RC, WC, WD, WD45, WF (when converted to 12V distributor ignition system) ] D10, D12, D14, D15, D17, D19, H3, I400, I600, 170, 175, 180, 185, 190, 190XT, And others using 12 Volt system.   This 12 Volt "Hot" Coil...

Allis Chalmers: WD45, D17 Fits the listed Marvel Schebler carbs Kit contains: Throttle shaft, needle and seat, float lever pin, choke and throttle shaft seal, needle valve, adjustment screw, gaskets and instructions Carb MFG: TSX464, TSX773, TSX871  

Allis Chalmers - D17, WD, WD45, 170, 175 (Gas, LP with G201, G226 engines., WC, WF (Engine SN: 13665 and up; Gas, LP with G201, G226 engines.) AC Combines - E, E3 (Gas, LP with G201, G226 engines.) AC Miscellaneous - Grader: D, DG, M65 (Gas, LP with...

Allis Chalmers: WD, WD45 Same gauge, weight, and material as original equipment Replacement for: 224934, 70224934  

Allis Chalmers - (WD, WD45 (Gas/LP/Diesel) 218 pages 8.5" x 11" x 1.13" Parts manual has exploded views of all parts on the tractor. Numbered pictures display great detail for assembly and disassembly. It also gives you a guide with numbers for...