Same Day Shipping On 99% Of Orders

Allis Chalmers 170 Tractor Parts

About the Allis-Chalmers 170

The Allis-Chalmers 170 was one of the larger tractors in the company's 1960s line. Introduced in 1967 as the One-Seventy, it used a four-cylinder engine, live PTO, hydraulic power assist, and an eight-speed transmission with two-speed power shift.

Early Allis-Chalmers literature calls it the One-Seventy, while later tractors use the numeric 170 marking. The model was available with gasoline or diesel power and was built through 1973, so the tractor year and serial number are useful when matching parts.

Serial Number Reference

Serial number locations: The tractor serial number is on the left front side of the torque housing. The gasoline engine serial number is at the rear left side of the engine block behind the carburetor. The diesel engine serial number is on the top right side of the cylinder block.

The table below shows the beginning tractor serial number for each Model 170 year:

 

1967-1969
Model 170 year Beginning serial number
1967 1,005
1968 2,721
1969 5,374
1970-1971
Model 170 year Beginning serial number
1970 6,369
1971 6,988
1972-1973
Model 170 year Beginning serial number
1972 7,797
1973 8,821

Total production: 9,303 Model 170 tractors; fuel-type production totals were not available.

Sort By:

Display Type:
Filters
  • Allis-Chalmers FM Series Rotor FM147, agricultural machinery part with black housing and brass contact plates used in farming equipment.

    Allis-Chalmers FM Series Rotor FM147

    Allis-Chalmers
    $17.75
    FM147
    Allis-Chalmers FM Series Rotor FM147Part Number: FM147Rotor for the FM Series magneto applications listed below. Check the model list carefully to confirm compatibility.FitsAllis Chalmers - Various...
  • Allis-Chalmers Ignition Tune-Up Kit W/ Rotor (Delco Distributor), automotive ignition components including rotor, condenser, and mounting hardware.

    Ignition Tune-Up Kit W/ Rotor for Delco Distributor ACR1932

    Allis-Chalmers
    $13.75
    ACR1932
    Ignition Tune-Up Kit W/ Rotor for Delco DistributorThe Ignition Tune-Up Kit W/ Rotor (For Delco) - ACR1932 includes a point set, a vibration-resistant condenser, and a rotor button.It is made for...
  • Allis-Chalmers Point Set - R2437, FM-J, FM-J4, FM-J4A, FM-J4B, FM-JE, JM-JG, FM-T, FMJ4-B3

    Fairbanks Morse Point Set for FM-J, FM-J4, FM-JE

    Allis-Chalmers
    $19.50
    FM154
    Part Number: FM154Point Set for Fairbanks Morse MagnetosPoint Set - FM154 for Fairbanks Morse magnetos. Replaces Fairbanks Morse part R2437 and is listed for clockwise rotation applications.FitsAllis...
  • Allis-Chalmers Fairbanks Morse FMJ FMX Magneto Condenser

    Fairbanks Morse FMJ FMX Magneto Condenser

    Allis-Chalmers
    $11.75
    FM110
    Part Number: FM110Fairbanks Morse FMJ FMX Magneto CondenserFM110 is a condenser for Fairbanks Morse FMJ and FMX magnetos. It is listed as new and replaces OEM part AXMR2433.FitsFairbanks Morse...
  • Allis-Chalmers Tie Rod Dust Boot, black rubber dust cover for allis chalmers G 70800442 tractor parts.

    Allis-Chalmers Tie Rod Dust Boot FD-336D 70800442

    Allis-Chalmers
    $4.95
    FD-336D
    Allis-Chalmers Tie Rod Dust Boot FD-336D 70800442This tie rod dust boot is listed as serviceable for Allis-Chalmers G and includes universal applications shown below. Dimensions and cross references...
  • Allis-Chalmers Universal Tie Rod Boot - AB-370D, black rubber protective cover for tie rods in vehicle steering systems.

    Universal Tie Rod Boot AB-370D

    Allis-Chalmers
    $4.95
    AB-370D
    Universal Tie Rod Boot AB-370DNew universal tie rod boot with the listed dimensions below. Use with care to confirm fitment against your application before ordering.FitsListed fitment...
  • Allis-Chalmers Tie Rod Boot - JD-736D, black rubber automotive part with a wide base and a hollow cylindrical opening.

    Tie Rod Boot JD-736D

    Allis-Chalmers
    $4.95
    JD-736D
    Tie Rod Boot JD-736DNew tie rod boot with the dimensions listed below. Review the fitment and replacement numbers carefully before ordering.FitsListed fitment includes:Allis...
  • Allis-Chalmers Tie Rod Boot FD-337D, black rubber protective cover for tie rod.

    Allis-Chalmers Tie Rod Boot FD-337D

    Allis-Chalmers
    $4.95
    FD-337D
    OverviewUniversal tie rod boot FD-337D for Allis-Chalmers and other tractor applications. This black rubber protective boot is listed with multiple brand and model fitments...
  • Allis-Chalmers Universal Tie Rod Boot AB-371D, black rubber automotive part for steering components.

    Universal Tie Rod Boot

    Allis-Chalmers
    $4.95
    AB-371D
    Part Number: AB-371DProduct OverviewUniversal tie rod boot with listed applications on multiple makes.FitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn Deere<
  • Allis-Chalmers Slip Fit Coupler for tractors, cylindrical metal part with holes for U-joint attachment.

    Slip Fit Coupler for Tractor Steering Shaft, AB-380D

    Allis-Chalmers
    $109.75
    AB-380D
    Slip fit coupler for tractor steering shafts when a U-joint is needed. Original style part. Use this coupler where the steering shaft requires a universal joint connection.Part number:...
  • Allis-Chalmers Economy Char-lynn Steering Coupler, metal steering coupler with U-joint for tractor steering systems.

    Economy Char-Lynn Steering Coupler AB-497D

    Allis-Chalmers
    $19.75
    AB-497D
    Economy Char-Lynn Steering CouplerThis economy coupler is for tractors with a U-joint at one end of the existing steering shaft.DJS part number: IH-555DFitsAllis Chalmers - variousCase -...
  • Allis-Chalmers 6 Volt Distributor Coil - AB-011D, black cylindrical ignition coil with a mounting clamp and electrical connection terminals.

    6 Volt Distributor Coil AB-011D

    Allis-Chalmers
    $27.75
    AB-011D
    6 Volt Distributor Coil - AB-011DThis 6 volt distributor coil is listed as AB-011D and fits listed tractor applications. It includes multiple cross-reference numbers across several brands.FitsAllis...
  • Allis-Chalmers HOT Coil, 55000-Volts, 12V high-voltage coil for industrial or agricultural equipment, shown with mounting bolts on a beige top plate.

    Allis-Chalmers HOT Coil 55000-Volts 12V AB-348D

    Allis-Chalmers
    $59.75
    AB-348D
    Allis-Chalmers HOT Coil 55000-Volts 12V AB-348D12V high-voltage coil for applications listed below. For faster starting, reduced plug fouling, and longer plug life.Important: Must use with AB-366D...
  • Allis-Chalmers Battery Retainer J-Bolt (Pair) IH-721D, black metal battery retainer bolts with wing nut threads and hooks for securing tractor batteries.

    Battery Retainer J-Bolt Pair IH-721D

    Allis-Chalmers
    $9.75
    IH-721D
    Battery Retainer J-Bolt PairThis IH-721D battery retainer J-bolt set comes as a pair. These are universal battery J-bolts and measure 5/16-18 NC x 10.750" long.FitsAllis-Chalmers: variousAvery:...
  • Allis-Chalmers 10-1/2" Pre-Cleaner Bowl, 3-5/8" Tall, clear plastic automotive or machinery part for air filtration or pre-cleaning.

    10-1/2" Pre-Cleaner Bowl, 3-5/8" Tall

    Allis-Chalmers
    $19.75
    AB-339D
    Part Number: AB-339DProduct OverviewClear plastic pre-cleaner bowl for tractors with a 3" to 4" inlet. Overall height is 3-5/8".FitsAllis Chalmers: Air intake on dsl models: D21, 170, 175, 180, 185,...
  • Allis-Chalmers Pre Cleaner Cap Assembly AB-383D, black and transparent plastic pre cleaner cap with mounting features for agricultural machinery.

    Pre Cleaner Cap Assembly AB-383D

    Allis-Chalmers
    $85.50
    AB-383D
    Pre Cleaner Cap Assembly AB-383DPre cleaner cap assembly for tractors with a 2-1/4" ID base. See listed fitment and replacement numbers below.FitsAllis Chalmers: variousCase: 450 Dsl, 530 Dsl, 570...
  • Allis-Chalmers Precleaner Kit JD-741D 1306480 249888 70249888, green and clear precleaner assembly for agricultural machinery.

    Precleaner Kit JD-741D 1306480 249888 70249888

    Allis-Chalmers
    $104.50
    JD-741D
    Precleaner Kit JD-741DPart number: JD-741DReplacement numbers: 1306480, 249888, 70249888Metal precleaner kit with metal lid and base. Fits models with a 3" ID base and 7" bowl. Measure before...
  • Allis-Chalmers Pre-cleaner Cap Assembly - AB-470D, black and transparent pre-cleaner cap for industrial equipment, with mounting base and adjustable clamp.

    Pre-cleaner Cap Assembly AB-470D

    Allis-Chalmers
    $45.95
    AB-470D
    Product OverviewPre-cleaner cap assembly AB-470D for selected tractors and equipment. Only models with 3" ID base and 7" bowl are listed.Note: Replacement numbers are listed below for reference...