Same Day Shipping On 99% Of Orders

Allis Chalmers 190 Tractor Parts

The Allis-Chalmers One-Ninety was introduced in 1964 as a larger row-crop tractor while the D Series was still in production. It used a six-cylinder gasoline or diesel engine, power steering, Allis Snap-Coupler, and the Power Director system for live PTO operation.

The 190 was built through 1972 and was part of the larger tractor line that also included the 190XT. The 190 and 190XT can look similar, so check the model marking and serial number to make sure you are looking at the correct information.

Serial number locations: The tractor serial number is stamped on the left side of the tractor in the flange where the engine and transmission meet. The engine serial number is on a nameplate at the upper left side of the cylinder block.

The table below shows the beginning tractor serial number for each Model 190 year:

 

1964-1966

Model 190 year Beginning serial number
1964 1,001
1965 2,485
1966 8,219

1967-1969

Model 190 year Beginning serial number
1967 13,273
1968 19,262
1969 23,234

1970-1972

Model 190 year Beginning serial number
1970 25,901
1971 29,136
1972 31,118

Total production: 4,726 Model 190 tractors; fuel-type production totals were not available.

Filter By

Sort By:

Display Type:
Filters
  • Allis Chalmers Ignition Switch Key Switch, used automotive ignition switch with key and electrical prongs for tractor or machinery ignition.

    Allis Chalmers Ignition Switch Key Switch (Display)

    $0.25
    583
    Ignition switch key switch for select Allis Chalmers tractors. OEM style key switch with 5 spade terminals, 3-position switch, drain hole, 2 keys, 1 nut, and 1 lock washer. Threaded stem size measures 9/16 - 24 UNEF. Part Number: AC-292D Fits Allis...
  • Allis-Chalmers 2-Position Light Switch AC-290D 228330, showing used electrical switch with metal housing and actuator on a brown background with a barcode label.

    Allis-Chalmers 2-Position Light Switch AC-290D 228330 (Display)

    $23.75
    578
    Allis-Chalmers 2-Position Light Switch Part Number: AC-290D This D Series 2-position light switch is listed for the tractor models below and uses 2 spade terminals. Fits Allis Chalmers - D10, D12, D14, D15, D17, D19, D21, 190, 190XT Replaces / Cross...
  • 4409X Sealed Beam Combination Rear Light Bulb 12V, display showing a round automotive rear light bulb with a reflective surface and red outer rim on a plain background

    4409X Sealed Beam Combination Rear Light Bulb 12V (Display)

    $16.00
    574
    Part Number: IH-899D Fits Allis Chalmers: D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7040, 7050, 7060, 7080 Avery Case Cockshutt: models with sealed beam combo tail light IH / Farmall: Cub, 140...
  • Allis Chalmers 12V Sealed Beam Combo Tail Light Assembly, display image of a round black tail light with a reflective clear lens and red wire, used for agricultural equipment.

    Allis Chalmers 12V Sealed Beam Combo Tail Light Assembly (Display)

    $93.50
    566
    Part Number: AC-355D Fits Allis Chalmers: 190XT (up to SN 19000), D10, D12, D15 (SN 9001 & up), D17 (SN 42001 & up), D19, D21, 190 Minneapolis Moline: JetStar 2, Jetstar 3 Super, M5, M504, M602, M604 Replaces / Cross...
  • 12 Volt Hi Beam Sealed Beam Head Lamp Assembly, round headlight with black casing and reflective interior, displayed on a beige background with a white label.

    12 Volt Hi Beam Sealed Beam Head Lamp Assembly (Display)

    $43.75
    564
    12 Volt Hi Beam Sealed Beam Head Lamp Assembly for the listed Allis-Chalmers and John Deere applications. It is 4.5" diameter and also used as a taillight on 1949 & up models. Part Number: JD-582D Fits Allis Chalmers: 190XT, 170, 175, 180, 185, 190,...
  • Round Fender and Cab Mount Amber Warning Light, display of a circular amber warning light with mounting hardware and electrical wires.

    Round Fender and Cab Mount Amber Warning Light (Display)

    $15.75
    561
    Round fender and cab mount amber warning light with amber lenses and a black diecast base. Double-contact bulb, 12-volt, 4" lens diameter. Part Number: AB-544D Fits Allis Chalmers: D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 5040,...
  • Oil Fill Breather Cap Without Clip, display image showing a black, rounded automotive breather cap placed on a brown surface with a label marked 556 and used parts / display.

    Oil Fill Breather Cap Without Clip (Display)

    $34.00
    556
    Oil fill breather cap without clip. Includes a copper filter element, has "OIL" stamped into the top, and is e-coated in black. Made in the USA. Part Number: AC-178D Fits Allis-Chalmers B Allis-Chalmers IB Allis-Chalmers C Allis-Chalmers...
  • Allis-Chalmers Snap Coupler Latch Spring Oversized Loops 70235881, a metallic coil spring with large loops and eyelets at both ends for agricultural equipment.

    Allis-Chalmers Snap Coupler Latch Spring Oversized Loops 70235881

    Allis-Chalmers
    $8.75
    AC-269S
    Allis Chalmers snap coupler latch spring for the models listed below. Oversized end loops slip over the existing rivets for fast, hassle‑free installation—no need to pull the old rivets. 3-1/4" overall length. Sold individually. 4 used per tractor...
  • Allis Chalmers Fuel Cap for D21, 190, 190XT, 200, 210, 220 - Display model of a round metallic fuel cap.

    Allis Chalmers Fuel Cap for D21, 190, 190XT, 200, 210, 220 (Display)

    $23.75
    541
    Fuel cap for select Allis-Chalmers tractors. Fits listed D21, 190, 190XT, 200, 210, 220, and 7000-series models. Includes gasket. Condition: New. Part Number: AC-336D Fits Allis Chalmers - D21, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040,...
  • Allis-Chalmers Case Radiator Cap, used automotive radiator cap displayed on a plain surface with a label showing the number 530 and description used parts display.

    Allis-Chalmers Case Radiator Cap (Display)

    $19.75
    530
    Chrome-plated radiator cap for select Allis-Chalmers and Case tractors and equipment. For pressurized systems and listed for the applications below. Part Number: AC-209D Fits Allis Chalmers - CA, D10, D12, D14, D15, D17, D19, D21, G, I40, I400, I60, WD,...
  • Fuel Filter Bail Assembly with Brass Nut, display view of a metal bail with brass nut and label with number 500 and 'Used Parts / Display' text.

    Fuel Filter Bail Assembly with Brass Nut (Display)

    $10.00
    500
    Fuel Filter Bail Assembly with Brass Nut - AB-236D for the listed tractor models. New part. Part Number: AB-236D Fits Allis Chalmers: 190XT, D21, U, UC, 190 (2.315 Tall Glass Bowl), D15 (Gas (SN: 9001 & up), & All Dsl), D17 (Gas (SN: 42001 &...
  • Allis Chalmers Sediment Bowl Assembly, used parts display for D15, D17, D19, D21, WD, WD45, 170, 175, 180, 190, 190XT models.

    Allis Chalmers Sediment Bowl Assembly D15 D17 D19 D21 WD WD45 170 175 180 190 190XT (Display)

    $27.75
    498
    Allis Chalmers sediment bowl assembly for the listed tractor models and applications below. Part Number: ACR2406 Fits 190XT, 190 (Gas, Dsl. Using 2.315 Long Glass Bowl) D15 (Gas (SN: 9001 & up) & All Diesel Using 2.315 Long Glass Bowl) D17 (Gas...
  • Allis-Chalmers 180 185 190 190XT Distributor Cap ACR1953, automotive engine distributor cap displayed on a flat surface with a label marked 496.

    Allis-Chalmers 180 185 190 190XT Distributor Cap ACR1953 (Display)

    $10.25
    496
    Product Overview Distributor cap ACR1953 for Allis-Chalmers 180, 185, 190, and 190XT. Also listed for additional JD, Massey Ferguson, MM, and Oliver models. For models with a screw held cap. Fits Allis Chalmers: 180, 185, 190, 190XT JD: 4000 gas, late...
  • Allis Chalmers Metal Seat Pan for D10, D12, D14, D15, D17, D19, D21 - Display model showing metal seat pan with multiple bolt holes for mounting.

    Allis Chalmers Metal Seat Pan for D10, D12, D14, D15, D17, D19, D21 (Display)

    $150.50
    492
    Allis Chalmers metal seat pan for select tractor models. Made in the USA with a steel frame and restoration-quality construction. Part Number: KM7539 Fits D10 D12 D14 D15 D17 D19 D21 Also fits 170, 175, 180, 185, 190, 190XT, 210, 220 if using a 2-piece...
  • Allis-Chalmers Seat Cushion Assembly for D10 D12 D14 D15 D17 D19 D21, display image of a black and white tractor seat cushion with a label on it.

    Allis-Chalmers Seat Cushion Assembly for D10 D12 D14 D15 D17 D19 D21 (Display)

    $399.75
    491
    Restoration quality seat cushion assembly for select Allis-Chalmers tractors. Cushions are embossed like original and include a steel frame, back rest, and bottom cushion. Part Number: AC-221D Fits D10 D12 D14 D15 D17 D19 D21 170, 175, 180, 185, 190,...
  • Allis-Chalmers Back Rest Seat Cushion for D10 D12 D14 D15 D17 D19 D21, display image of black and white tractor seat cushion with orange price tag.

    Allis-Chalmers Back Rest Seat Cushion for D10 D12 D14 D15 D17 D19 D21 (Display)

    $175.00
    490
    Restoration quality back rest seat cushion for select Allis-Chalmers tractors. Cushion is embossed like original and made in the USA. Part Number: AC-222D Fits D10 D12 D14 D15 D17 D19 D21 170, 175, 180, 185, 190, 190XT, 210, 220 if using 2-piece seat...