Axle / Steering Parts

Allis Chalmers - B, IB, C Washer takes up approximately 1/8" of the slop in rear wheel hub to spline on Allis Chalmers B, IB, and C tractors.    

Allis Chalmers - B, IB, C Custom Axle Nut Socket to remove the axle nut on Allis Chalmers B, IB, and C tractors.    

  Power Steering Belt Allis Chalmers D17 Diesel D19 Gas Diesel 70235394 Allis-Chalmers Power Steering Belt for D17 Diesel and D19 Gas/Diesel models. Part number 70235394. This essential power steering part ensures optimal performance. Ideal for...

Allis Chalmers - G Replaces - 70248104 Front Wheel Bearing Set includes: 1 - Seal 70800445 1 - Bearing 70800449 1 - Race / Cup 70800048 1 - Race / Cup 70211897 1 - Bearing 70800186

Allis Chalmers - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580 Fleetguard Differential Return Hydraulic Filter Replaces - 70269922, HF6071

Allis Chalmers - 7000 (with Heavy Duty Front Axle), 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 3" Front Wheel Hub Cap Replaces - 70275820, 70229116

Allis Chalmers - WD, WD45, D14, D15, D17, (D10 Sn# 3501-9000 High Clearance Only, D12 Sn# 3001-9000 High Clearance Only), WC (Tricycle and Sn# 23529 and up with hub #206342 or Sn# 41388 and up with Hub #211995) Replaces - 70206343, 70276820, 0206343-6,...

Allis Chalmers - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Spindle Thrust Washer Replaces - 70267296, 267296

Allis Chalmers - D21 Replaces - 238934, 70238934 Outer Axle Seal  4.260 OD x 3.190 ID

Allis Chalmers Tractor - WD, WD45, WD45 Diesel, D10, D12, D14, D15, D19, 175, 180, 185, 190, 200,  D17 (early models with 5 bolt hub), 170 (late models), 6060 (with 96" standard tread), 6070 (with 96" standard tread), 6080, 7000 (early...

Allis Chalmers - D21, 210, 220 2-Piece Wheel Hub Seal Kit - Contains Part #'s 70239446 and 70239462 - OEM AGCO Brand Replaces - 70239435, 239435, 70239446, 70239462

Allis Chalmers - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Lower Spindle Bushing Only - 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 (1 Per Spindle, 2 Per Tractor) - See AC-5365D for Upper bushing...

Allis Chalmers - D21, 210, 220, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Upper & Lower Spindle Bushing - D21, 210, 220  (2 Per Spindle, 4 Per Tractor) Upper Spindle Bushing Only - 7010, 7020, 7030, 7040, 7045,...

Allis Chalmers - 180, 185, 190 9 Piece Power Steering Cylinder O-Ring and Seal Kit Replaces - 70255712-5, 255712-5

Allis Chalmers - 7010, 7020, 7030, 7040, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Wheel Bearing Kit Replaces - 70268904, 268904

Allis Chalmers - D10 Series II SN 3501-9001, D12 Series II SN 3001-9000 (Only) Front Wheel Bearing Kit70222214 Bearing70209987 Cup70209926 Bearing70209983 Cup70202104 Felt Seal70202103 Retainer

Allis Chalmers - WD, WD45 Differential housing rear cover gasket Replaces - 70222013, 222013

ALLIS CHALMERS - WD, WD45, D10 (SN 3501 & UP), D12 (SN 3001-9000), D14, D15 (UP TO 9001), D17 (UP TO 42001)    

ALLIS CHALMERS - D21, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070   Front Wheel Hub 8 Lug   WHEEL BEARINGS FOR THIS HUB ARE PART NUMBER WBKAC3   70265167, 265167    

Allis Chalmers - D10 (w/ 5 bolt front hub SN: 3501 & up and High Clear up to SN: 3501), D12 (w/ 5 bolt front hub SN: 3001 & up and High Clear up to SN: 3501), D14 (w/ 5 bolt front hub, Wide Front Only), D15 (w/ 5 bolt front hub up to SN: 9001),...

Allis Chalmers - D10, D12, D14, D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 190XT III, 200, 6060, 6070, 6080, 7000 Spindle Key Front Axle Steering 1.315" Long - 0.375" Wide - 0.532" Tall Replaces - 79023996  

ALLIS CHALMERS - D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080 THREADED HUB CAP CROSS REFERENCE - 70220403  

ITEM # 70202864 ALLIS CHALMERS - G SET SCREW FOR REAR AXLE COLLAR   70202864, 202864

ITEM # 70800165 ALLIS CHALMERS - G   REAR AXLE COLLAR FOR THE ALLIS CHALMERS G. HOLDS AXLE, AXLE SEAL, AND BEARING IN PLACE IN AXLE TUBE. 1 REQUIRED PER AXLE. (THIS PART IS NLA "NO LONGER AVAILABLE FROM AGCO" ALLIS CHALMERS)   CROSS...

Allis Chalmers - D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000 AC Misc - I60, 615, I600, (500, 600 Forklifts) Replacement - 70261418, 261418 Front Wheel Hub 6 Lug, 6" Bolt Circle, 4.620" Pilot Hole For use with threaded...

Allis Chalmers - D17, 170, 175, 180, 185, N7 Combine O-Ring Bearing Carrier sold as a pair, 2 used per tractor.   8050 uses 2 on the hydraulic pump housing 8070 uses 2 on the hydraulic pump housing   OEM AGCO Replacement - 70923820    

Allis Chalmers - D14, D15, D17, D19Fits 7/8" (0.875) Dia shaft Both Ends * Includes: Yokes, pins and grease fittingReplacement for: 70228906, 228906  USJ78

Allis Chalmers - CAReplacement - Bracket 225272, Pivot Pin 222723Pivot Pin "MUST BE CUT OFF TRACTOR" and replacement must be welded on. Bracket will bolt in place. Pin is High Alloy Steel for long wear. Comes Primered

Allis Chalmers - D14, D15 (used as a vertical splined steering shaft seal, fits Manual or Power steering; Replaces: 227850, 229726, 229967, 70227850, 70229726, 70229967 International - [ B-450, BM, BMD, M, MD, MDV, MTA, MTAV, MV, Super M, Super MD, Super...

Allis Chalmers - D17, 170, 175Replacement - 70232173, 232173Inner Axle Pinion Shaft Seal

Allis Chalmers - D21 (Steering Shaft Support Bushing; 1 required per tractor), [D14, D15, D17, D19 (Steering Shaft Support Bushing; 2 required per tractor)], [180, 185, 190, 190XT, 190 XT III, 200, 210, 220, 220 FWA (Steering Shaft Support Bushing; 2...

Allis Chalmers - D17, 170, 175, 180, 185Replacement - 70271736, 271736

Allis Chalmers - D19, [190, 190XT, 190XT III (Prior to SN 9001)]Replacement - 70235312, 2353121 Required per side, 2 Required per Tractor, *Sold Individually*

Allis Chalmers - D10, D12, D14, D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XTReplacement - 70235120, 235120Wheel Bearing Sleeve & Seal Kit

Allis Chalmers - G Replaces - 70800445, 800445These Drive into Hub like Conventional Seals - 2 used per tractor, sold individually.0.320 Thick, 2.130 O.D., 1.120 I.D. For Spindle O.D. of 1.188

Allis Chalmers - WD, WD45, D17, 170, 175, 180, 185Replacement - 70218450, 218450Pinion shaft axle seal (Differntial Seal) - ** On Pinion Shaft Next To Differential **-- 2 Required Per Tractor --1.435" ID, 2.378" OD, 0.483" Thick

Allis Chalmers - WD, WD45, WD45 Diesel Front Tricycle Upper Spindle Shaft Seal - Replacement for: 70202102, 202102 Measurements: 2.375" OD, 1.715" ID, 0.310" Wide

Allis Chalmers - B,IB,C,CAFront Tricycle Lower Steering Spindle Shaft Seal - Replacement for: 70210289, 210289Measurements: 2.760" OD, 1.670" ID, 0.313" Wide

Allis Chalmers - B, IB, C, CAFront Tricycle Upper Steering Spindle Shaft Seal - Replacement for: 70210293, 210293Measurements: 1.953" OD, 1.330" ID, 0.340" Wide

Allis Chalmers - D14, D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 220 FWA, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 8010, 8030, 8050 Gleaner Combines - L-Series Prior to SN 13000, M-Series OEM...