Same Day Shipping On 99% Of Orders

Allis Chalmers CA Tractor Parts

About the Allis-Chalmers CA

The Model CA followed the Model C in 1950 and gave small farms a little more speed and flexibility. It kept the compact row-crop layout and four-cylinder engine, but added a four-speed transmission and a live PTO operated by a hand clutch. That hand clutch lets the PTO keep turning while the tractor is stopped, which is useful with a mower or other PTO-driven equipment.

Built at West Allis from 1950 through 1958, the CA remained a practical tractor for cultivation, mowing, and general farm work. The model is a useful step between the older C and the newer D Series.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on top of the transmission case, next to the shift lever. The engine serial number is on the rear left-hand side of the engine.

The table below shows the beginning tractor serial number for each Model CA year:

 

1950-1952
Model CA year Beginning serial number
1950 14
1951 322
1952 10,539
1953-1955
Model CA year Beginning serial number
1953 22,181
1954 31,424
1955 32,907
1956-1958
Model CA year Beginning serial number
1956 37,203
1957 38,618
1958 38,977

Total production: 39,499 Model CA tractors.

The final CA serial number was 39,513.

Allis-Chalmers CA Paint Reference

For restoration planning, the Allis-Chalmers CA is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers CA paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Throttle Butterfly Disc for Marvel Schebler Carburetor, metal circular disc with two holes for installation.

    Throttle Butterfly Disc for Marvel Schebler Carburetor

    Allis-Chalmers
    $6.00
    AB-1159D
    Throttle butterfly disc for Marvel Schebler carburetor. Aluminum disc measuring 1.105" outside diameter.Fits the listed Allis Chalmers, Ford, International, John Deere, and Minneapolis Moline...
  • Allis-Chalmers Starter Switch Allis Chalmers B C CA G IB RC WC WD WD45 WF

    Starter Switch for Allis-Chalmers B C CA G IB RC WC WD WD45 WF

    Allis-Chalmers
    $12.75
    AB-012D
    Part Number: AB-012DStarter Switch for Allis-Chalmers B C CA G IB RC WC WD WD45 WFManual foot / lever starter switch with saddle mount. Does not fit Autolite starter applications.FitsAllis-Chalmers:...
  • Allis-Chalmers Governor Rod Linkage Spring B IB C CA D10 D12 D14 D15 RC, mechanical spring with loops at both ends for engine governor linkage adjustment.

    Allis Chalmers Governor Rod Linkage Spring B IB C CA D10 D12 D14 D15 RC

    Allis-Chalmers
    $11.75
    AC-304D
    Governor rod linkage spring for Allis Chalmers tractors and equipment. For distributor or magneto ignition.Part Number: AC-304DFitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers...
  • Allis-Chalmers Choke Butterfly Disc, close-up of a round metal component with a central threaded screw and two small holes.

    Choke Butterfly Disc

    Allis-Chalmers
    $29.75
    AB-1171D
    Choke butterfly disc with listed applications for Allis Chalmers, Ford, and Massey Ferguson equipment.Part Number: AB-1171DFitsAllis Chalmers CAAllis Chalmers D14Allis Chalmers D15Ford 501Ford...
  • Allis-Chalmers G Choke Rod, AC-344D, 70800118, a metallic rod with a loop at one end for engine control.

    Allis-Chalmers G Choke Rod | AC-344D | 70800118

    Allis-Chalmers
    $24.75
    AC-344D
    Part Number: AC-344DAllis-Chalmers G Choke RodNew choke rod for Allis-Chalmers G tractors. USA made and identified as AC-344D.FitsAllis-Chalmers GReplaces / Cross Reference800118NotesUSA madePRIMER
  • Allis-Chalmers Universal Choke Cable 72"

    Universal Choke Cable 72"

    Allis-Chalmers
    $14.75
    AB-423D
    Universal choke cable with a 72" metal sheathed length.Cut to length. Can also be used as a stop cable for diesel engines. Various tractors, forklifts, and other applications using 72" or less cable...
  • Allis-Chalmers Metal Sheathed Choke Cable 47"

    Metal Sheathed Choke Cable 47"

    Allis-Chalmers
    $22.75
    JD-718D
    Metal sheathed choke cable with a 47" length and plastic knob.Cut to length. Thread length where it goes through the dash is 3/8".Part Number: JD-718DFitsAllis Chalmers - various modelsAvery -...
  • Aftermarket Top Link, industrial mechanical linkage component for heavy machinery or agricultural equipment, shown with a rod and mounting eye

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT...
  • Allis-Chalmers Snap Coupler Latch Repair Kit, image showing springs, bolts, nuts, washers, and pins for tractor coupler repair.

    Allis Chalmers Snap Coupler Latch Repair Kit

    Allis-Chalmers
    $29.75
    AC-347D
    Allis Chalmers Snap Coupler Latch Repair Kit for 190XT, D10, D12, D14, D15, D17, D19, WD, WD45, and 190.2 kits used per tractor; sold individually.Part Number: AC-347DFitsAllis Chalmers - 190XT, D10,...
  • Allis-Chalmers Snap Coupler Latch Spring 70235881, gold-colored coiled metal latch spring with loop ends.

    Allis-Chalmers Snap Coupler Latch Spring 70235881

    Allis-Chalmers
    $8.75
    AC-269D
    Allis Chalmers snap coupler latch spring for the models listed below.3-1/4" overall length. Sold individually. 4 used per tractor. CA used a different spring that is no longer available, but this...
  • Aftermarket 3 PT Lynch Pin, metallic pin with a circular ring for securing attachments in farming equipment.

    3 PT Lynch Pin

    Aftermarket
    $2.00
    MI-119D
    3 PT Lynch Pin for 3-point equipped tractors and implements using 7/16" diameter pins.Part Number: MI-119DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey...
  • Allis-Chalmers Universal Oil Pressure Gauge (0-30 LB) - AB-004D

    Universal Oil Pressure Gauge 0-30 LB

    Allis-Chalmers
    $21.75
    AB-004D
    Universal oil pressure gauge with a 0-30 LB range for the applications listed below. Includes verified Allis-Chalmers and John Deere fitment and replacement numbers.Part Number: AB-004DFitsAllis...
  • Allis-Chalmers Oil Pressure Gauge Copper Line Kit

    Oil Pressure Gauge Copper Line Kit

    Allis-Chalmers
    $29.75
    AB-523D
    Oil pressure gauge copper line kit for the applications listed below. Includes 6 FT of 1/8" copper line and the fittings listed in the kit contents.Part Number: AB-523DFitsAllis...
  • Allis-Chalmers Temperature Gauge Red Needle, circular water temperature gauge with temperature markings from 120 to 220 degrees Fahrenheit, green, white, and red color zones indicating safe, warning, and freezing temperatures.

    Allis-Chalmers Temperature Gauge Red Needle

    Allis-Chalmers
    $32.75
    AC-064D
    Part Number: AC-064DAllis-Chalmers Temperature GaugeThis water temperature gauge has a white face, red needle, and the Allis-Chalmers name. It screws into the radiator neck and is like original...
  • Allis-Chalmers Allis Chalmers Amp Gauge B C CA G WC WD WD45 WF D14 D15 D17

    Allis Chalmers Amp Gauge

    Allis-Chalmers
    $29.75
    AC-258D
    Allis Chalmers amp gauge with a chrome bezel and restoration quality finish.Fits the Allis Chalmers models listed below.Part Number: AC-258DFitsAllis Chalmers: B, C, CA, G, WC, WD, WD45, WD45D, WF,...
  • Allis-Chalmers AMMETER (AMP) GAUGE, 60-0-60 - AB-466D

    AMMETER (AMP) GAUGE, 60-0-60

    Allis-Chalmers
    $19.75
    AB-466D
    Ammeter (amp) gauge with a 60-0-60 range, chrome bezel, and no logo.Fits most tractors equipped with an alternator and a 2" diameter hole.Part Number: AB-466DFitsAllis ChalmersAveryCaseCockshuttFord
  • Allis-Chalmers Allis Chalmers Oil Pressure Gauge B IB C CA G RC WC WF WD WD45

    Allis Chalmers Oil Pressure Gauge

    Allis-Chalmers
    $32.75
    AC-159D
    Allis Chalmers oil pressure gauge for the listed models and applications.Features a 0 - 30 PSI range, chrome bezel, and engine mounted design.Part Number: AC-159DFitsAllis Chalmers: B, IB, C, CA, G,...
  • Aftermarket In-Line Fuel Filter AB-490D

    In-Line Fuel Filter for Various Models

    Aftermarket
    $12.95
    AB-490D
    In-line fuel filter for various models using 3/8" fuel lines. Includes hose and clamps.Use to help keep rust and dirt out of the carburetor.Part Number: AB-490DFitsAllis...