Same Day Shipping On 99% Of Orders

Allis Chalmers D14 Tractor Parts

About the Allis-Chalmers D14

The D14 opened the Allis-Chalmers D Series in 1957 as a new compact tractor for row-crop and general farm work. Its 149-cubic-inch four-cylinder engine was available for gasoline or LP gas, and the four-speed transmission could be paired with a transfer case for more gear choices. The D14 was equipped with the Power Director hand clutch, which gave the operator live PTO control without stopping the tractor.

Built through 1960, the D14 sits between the older CA and WD-era tractors and the D15 that followed it. The serial number table below can help identify the tractor's year.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left front end of the torque tube. The engine serial number is on the rear left-hand side of the engine, behind the carburetor.

The table below shows the beginning tractor serial number for each Model D14 year:

 

1957-1958
Model D14 year Beginning serial number
1957 1,001
1958 9,400
1959-1959
Model D14 year Beginning serial number
1959 14,900
1960-1960
Model D14 year Beginning serial number
1960 21,800

Total production: 23,050 Model D14 tractors.

Allis-Chalmers D14 Paint Reference

For restoration planning, the Allis-Chalmers D14 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D14 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21, metallic hood latch snap fitting on brown background

    Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21 (Display)

    $9.50
    650
    Part Number: CH4000 Hood Latch Snap Latch Hood latch snap latch for select Allis Chalmers tractors, bale throwers, balers, and some Gleaner combines. Strike not included. Fits ALLIS CHALMERS - D10,...
    Add to Cart
  • Light Ring 4-3/4" (Display), black circular light ring used for display lighting or photography.

    Light Ring 4-3/4" (Display)

    $12.50
    567
    Interchangeable with original. Part Number: IH-353BD Fits Allis-Chalmers B, IB, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45 Avery Case VA, VAC, VAH (All up to sn 5400000) Cockshutt CO-OP...
    Add to Cart
  • Light Visor for Allis-Chalmers D10 D12 D15 D17 D19, red curved tractor part for display or repair.

    Light Visor for Allis-Chalmers D10 D12 D15 D17 D19 (Display)

    $15.75
    575
    Light visor MF-108D for select Allis-Chalmers, Massey Ferguson, and Massey Harris applications. New condition. Part Number: MF-108D Fits Allis Chalmers: D10 (SN: 9001 & up), D12 (SN: 9001 & up), D15...
    Add to Cart
  • Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose, display of a vintage metal emblem with orange and silver colors, featuring large letters A-C and the words Allis-Chalmers.

    Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose (Display)

    $27.25
    528
    Persian Orange #1 Emblem for Allis-Chalmers steering wheel and front nose applications. Die cast, chromed, painted Persian #1 background. Part Number: A9900 Fits Allis Chalmers - ED40, D10, D12,...
    Add to Cart
  • Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson, display showing a metallic bolt with a hexagonal head, screw threads, and a tapered end.

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson (Display)

    $7.00
    662
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini. Use with parallel or 90 degree...
    Add to Cart
  • Sediment Bowl Assembly for Allis Chalmers D10, D12, D14, WC, WD, WF, WD45, 170, and Case, used tractor parts display showing a metal and glass sediment bowl with mounting hardware on a brown background.

    Sediment Bowl Assembly for Allis Chalmers D10, D12, D14, WC, WD, WF, WD45, 170 and Case (Display)

    $27.75
    504
    Sediment bowl assembly for select Allis Chalmers and Case tractors. Includes a shallow bowl with 3/8" pipe inlet and two 1/8" pipe outlets. Part Number: AB-002D Fits Allis Chalmers D10 (Using 2...
    Add to Cart
  • Thermostat 160 Degrees for Allis-Chalmers and More, displaying a used metal component with a label indicating it's a display item.

    Thermostat 160 Degrees for Allis-Chalmers and More (Display)

    $31.75
    506
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter. Fits the listed tractor applications below. Part Number: IH-913D Fits Allis Chalmers: B (Engine SN: 126210 & up when equipped...
    Add to Cart
  • Universal Oil Pressure Gauge, black dial with white markings and needle indicating pressure, mounted in a silver metal casing.

    Universal Oil Pressure Gauge 0-50 LB (Display)

    $17.50
    622
    Universal oil pressure gauge with a 0-50 LB range and the applications listed below. Black face with white letters, chrome bezel, and no logo. Part Number: AB-082D Fits Allis Chalmers - WD45 Dsl,...
    Add to Cart
  • Allis-Chalmers USED ALLIS CHALMERS BASE OIL FILTER ASSEMBLY (230)

    Used Allis Chalmers Base Oil Filter Assembly ( )

    Allis-Chalmers
    $10.00
    230
    Used Allis Chalmers base oil filter assembly (230) with missing stand pipe.We have new stand pipes available see part # KI1189.Part Number: 230FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers...
    Add to Cart
  • Allis-Chalmers Used Allis-Chalmers Oil Filter Base, used and weathered oil filter base with mounting bracket and attached hose.

    Used Allis-Chalmers Oil Filter Base

    Allis-Chalmers
    $25.00
    412
    Used Allis-Chalmers oil filter base, part 412.All sales final on used items.Part Number: 412FitsBIBCCAD10D12D14D17WDWD45WCRCWFNotesUsed item.No returns accepted on used items.
    Add to Cart
  • Water Temperature Gauge (Display), black dial with white markings and needle showing temperature from 0 to 220 degrees Fahrenheit.

    Water Temperature Gauge (Display)

    $27.75
    625
    Part Number: AB-239D Water Temperature Gauge This water temperature gauge reads 100 to 280 degrees and includes a 6-foot capillary tube, lighting, and mounting hardware. It has a chrome bezel and...
    Add to Cart
  • Zenith Carburetor Float, used display product for carburetor adjustment and operation.

    Zenith Carburetor Float (Display)

    $13.50
    689
    Zenith carburetor float for listed applications. Verify your carburetor manufacturer number before ordering. Part Number: AB-190D Fits Allis Chalmers: B, IB, C, CA, WF, RC w/ zenith 9492 or 9507,...
    Out of stock