Same Day Shipping On 99% Of Orders

Allis Chalmers D14 Tractor Parts

About the Allis-Chalmers D14

The D14 opened the Allis-Chalmers D Series in 1957 as a new compact tractor for row-crop and general farm work. Its 149-cubic-inch four-cylinder engine was available for gasoline or LP gas, and the four-speed transmission could be paired with a transfer case for more gear choices. The D14 was equipped with the Power Director hand clutch, which gave the operator live PTO control without stopping the tractor.

Built through 1960, the D14 sits between the older CA and WD-era tractors and the D15 that followed it. The serial number table below can help identify the tractor's year.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left front end of the torque tube. The engine serial number is on the rear left-hand side of the engine, behind the carburetor.

The table below shows the beginning tractor serial number for each Model D14 year:

 

1957-1958
Model D14 year Beginning serial number
1957 1,001
1958 9,400
1959-1959
Model D14 year Beginning serial number
1959 14,900
1960-1960
Model D14 year Beginning serial number
1960 21,800

Total production: 23,050 Model D14 tractors.

Allis-Chalmers D14 Paint Reference

For restoration planning, the Allis-Chalmers D14 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D14 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Water Pump, display model with attached orange tag and gasket, on a beige surface

    Allis-Chalmers Water Pump (Display)

    Allis-Chalmers
    $95.50
    459
    New water pump for Allis-Chalmers tractors. Fits B, IB, C, CA, RC, D10, D12, and D14. The pump has a 3/8" NPT bypass hole which can be plugged if needed. Part Number: AC-227D Fits Allis-Chalmers...
  • Bullet Style Tail Light Assembly for Allis-Chalmers D14, D15, D17, used parts display, with black casing and red lens, mounted on a metal bolt with green wiring.

    Bullet Style Tail Light Assembly for Allis-Chalmers D14, D15, D17 (Display)

    Allis-Chalmers
    $55.00
    573
    Bullet style tail light assembly for listed Allis-Chalmers, AC Cotton Picker, John Deere, and JD Lawn & Garden applications. Part Number: AB-3023D Fits Allis Chalmers D14 (SN 19001 and up) Allis...
  • Cap for Fuel, Gas, Oil, or Power Steering, display view of a metallic cap with a rounded shape and central valve, used for vehicle fluid reservoirs.

    Cap for Fuel, Gas, Oil, or Power Steering (Display)

    Allis-Chalmers
    $8.00
    535
    Part Number: IH-338D Product Overview Cap can be used as an engine oil cap, auxiliary starting tank cap, power steering cap, or oil filler cap. Fits Allis Chalmers: Engine Oil Cap: G Allis Chalmers:...
  • Delco Distributor Terminal Insulator Assembly Square Style - AB-500D, used part displayed with a black insulator and metal terminal components on a brown surface.

    Delco Distributor Terminal Insulator Assembly Square Style - AB-500D (Display)

    Allis-Chalmers
    $12.00
    674
    Delco Distributor Terminal Insulator Assembly, Square Style Important: AB-500D is a square-style Delco distributor terminal insulator assembly. It is for Delco distributors only and will not fit IH...
  • Fuel Bail Assembly (Short Bowl), metal component with adjustable screw, used for fuel system maintenance or repair.

    Fuel Bail Assembly (Short Bowl) (Display)

    Allis-Chalmers
    $6.00
    501
    Fuel Bail Assembly (Short Bowl) for Allis-Chalmers and other listed tractor models. New part. Part Number: AB-563D Fits Allis Chalmers: B, IB, C, CA, D10, D12, D14, D15 Gas (up to sn 9001), D17 Gas...
  • Headlight Lens w/ Guide Name 4-3/4" (Display), transparent round car headlight lens with a textured surface for vehicle lighting.

    Headlight Lens w/ Guide Name 4-3/4" (Display)

    Allis-Chalmers
    $12.50
    568
    Part Number: IH-352D Headlight Lens w/ Guide Name This 4-3/4" headlight lens has a "GUIDE" marking near the bottom of the lens and a dimpled outer surface. It is interchangeable with the original...
  • Headlight Reflector for Allis-Chalmers and Other Models, shiny chrome round reflector with mounting hole, displayed on a brown background.

    Headlight Reflector for Allis-Chalmers and Other Models (Display)

    Allis-Chalmers
    $11.75
    569
    Part Number: AB-320D Fits Allis Chalmers - B, C, CA, D10, D12, D14, D15 (up to sn 9001), RC, WC, WD, WD45, WF Case - VA, VAC, VAH (all up to sn 5400000) Cockshutt - 20, 30, 40, 50, 540, 550, 560,...
  • Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21, metallic hood latch snap fitting on brown background

    Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21 (Display)

    Allis-Chalmers
    $9.50
    650
    Part Number: CH4000 Hood Latch Snap Latch Hood latch snap latch for select Allis Chalmers tractors, bale throwers, balers, and some Gleaner combines. Strike not included. Fits ALLIS CHALMERS - D10,...
  • Light Ring 4-3/4" (Display), black circular light ring used for display lighting or photography.

    Light Ring 4-3/4" (Display)

    Allis-Chalmers
    $12.50
    567
    Interchangeable with original. Part Number: IH-353BD Fits Allis-Chalmers B, IB, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45 Avery Case VA, VAC, VAH (All up to sn 5400000) Cockshutt CO-OP...
  • Light Visor for Allis-Chalmers D10 D12 D15 D17 D19, red curved tractor part for display or repair.

    Light Visor for Allis-Chalmers D10 D12 D15 D17 D19 (Display)

    Allis-Chalmers
    $15.75
    575
    Light visor MF-108D for select Allis-Chalmers, Massey Ferguson, and Massey Harris applications. New condition. Part Number: MF-108D Fits Allis Chalmers: D10 (SN: 9001 & up), D12 (SN: 9001 & up), D15...
  • Main Bearing Set (Set of 3) for Allis-Chalmers D10, D12, D14, D15, I40, I400, I60, I600, H3 0.010 Undersize

    Main Bearing Set (Set of 3) for Allis-Chalmers 0.010 Undersize

    Allis-Chalmers
    $199.75
    MS-902AL-010
    Standard main bearing set for Allis-Chalmers applications listed below. Set of 3. For 2.749 standard main journal. Part Number: MS-902AL-010 Fits Allis Chalmers - D10, D12, D14, D15, I40, I400, I60...
  • Main Bearing Set (Set of 3) for Allis-Chalmers D10, D12, D14, D15, I40, I400, I60, I600, H3 0.020 Undersize

    Main Bearing Set (Set of 3) for Allis-Chalmers 0.020 Undersize

    Allis-Chalmers
    $199.75
    MS-902AL-020
    Standard main bearing set for Allis-Chalmers applications listed below. Set of 3. For 2.749 standard main journal. Part Number: MS-902AL-020 Fits Allis Chalmers - D10, D12, D14, D15, I40, I400, I60...
  • Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose, display of a vintage metal emblem with orange and silver colors, featuring large letters A-C and the words Allis-Chalmers.

    Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose (Display)

    Allis-Chalmers
    $27.25
    528
    Persian Orange #1 Emblem for Allis-Chalmers steering wheel and front nose applications. Die cast, chromed, painted Persian #1 background. Part Number: A9900 Fits Allis Chalmers - ED40, D10, D12,...
  • Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson, display showing a metallic bolt with a hexagonal head, screw threads, and a tapered end.

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson (Display)

    Allis-Chalmers
    $7.00
    662
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini. Use with parallel or 90 degree...
  • Thermostat 160 Degrees for Allis-Chalmers and More, displaying a used metal component with a label indicating it's a display item.

    Thermostat 160 Degrees for Allis-Chalmers and More (Display)

    Allis-Chalmers
    $31.75
    506
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter. Fits the listed tractor applications below. Part Number: IH-913D Fits Allis Chalmers: B (Engine SN: 126210 & up when equipped...
  • A rusty, used Allis-Chalmers base oil filter assembly with a long, slender bolt attached, lying on a plain surface. The image highlights the worn and aged condition of the part.

    Used Allis Chalmers Base Oil Filter Assembly ( )

    Allis-Chalmers
    $10.00
    230
    Used Allis Chalmers base oil filter assembly (230) with missing stand pipe.We have new stand pipes available see part # KI1189.Part Number: 230FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers...
  • Allis-Chalmers Used Allis-Chalmers Oil Filter Base, used and weathered oil filter base with mounting bracket and attached hose.

    Used Allis-Chalmers Oil Filter Base

    Allis-Chalmers
    $25.00
    412
    Used Allis-Chalmers oil filter base, part 412.All sales final on used items.Part Number: 412FitsBIBCCAD10D12D14D17WDWD45WCRCWFNotesUsed item.No returns accepted on used items.