Same Day Shipping On 99% Of Orders

Allis Chalmers D15 Tractor Parts

About the Allis-Chalmers D15

The D15 replaced the D14 in 1960 and carried the compact D Series design into the 1960s. Early D15 tractors used a four-cylinder engine available in gasoline, LP gas, or diesel versions, with more power and an eight-speed transmission option.

There are two main versions to keep in mind: Series I was built from 1960 through 1962, and Series II from 1963 through 1968. Series II tractors received larger gas and LP engines, a dry air cleaner, headlights moved to the rear fenders, and updated hood decals. These changes are why the model year and serial number should be checked before ordering a D15 part.

Serial Number Reference

Serial number locations: On Series I tractors, the tractor serial number is stamped at the left front end of the torque housing. The gasoline engine serial number is on the rear left-hand side behind the carburetor, and the diesel engine serial number is on the top left-hand side of the engine block. On Series II tractors, the tractor serial number is stamped into the flange where the engine and transmission meet on the left side; gasoline engine numbers are at the rear left-hand side near the carburetor, and diesel numbers are on the top left-hand side of the cylinder block.

The table below shows the beginning tractor serial number for each Model D15 year and series:

 

1960-1962
Model D15 year Beginning serial number
1960 - Series I 1,001
1961 - Series I 1,900
1962 - Series I 6,470
1963-1965
Model D15 year Beginning serial number
1963 - Series II 13,001
1964 - Series II 16,928
1965 - Series II 19,681
1966-1968
Model D15 year Beginning serial number
1966 - Series II 21,375
1967 - Series II 23,734
1968 - Series II 25,127

Total production: 7,169 Model D15 tractors: 6,212 gas/LP and 957 diesel.

Allis-Chalmers D15 Paint Reference

For restoration planning, the Allis-Chalmers D15 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D15 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Bottom Seat Cushion for D10 D12 D14 D15 D17 D19 D21, black and white padded tractor seat with an orange label on top.

    Allis-Chalmers Bottom Seat Cushion for D10 D12 D14 D15 D17 D19 D21(Display)

    Allis-Chalmers
    $199.75
    489
    Restoration quality bottom seat cushion for select Allis-Chalmers tractors. Cushion is embossed like original and made in the USA. Part Number: AC-223D Fits D10 D12 D14 D15 D17 D19 D21 170, 175,...
  • Allis-Chalmers Cap Screw Bolt & Block 70202132, display image of a used bolt, a rectangular metal block with a hole, and a label indicating part number 665.

    Allis-Chalmers Cap Screw Bolt & Block 70202132 (Display)

    Allis-Chalmers
    $11.00
    665
    Cap screw, bolt, and block for fuel tank and radiator straps. Sold individually and supplied as 1 screw and 1 mounting block. Part Number: 70202132 Fits Allis Chalmers - B (prior to SN B-58401), IB,...
  • Allis-Chalmers Case Radiator Cap, used display part shown on a beige background with a label marked 530 and barcode.

    Allis-Chalmers Case Radiator Cap (Display)

    Allis-Chalmers
    $19.75
    530
    Chrome-plated radiator cap for select Allis-Chalmers and Case tractors and equipment. For pressurized systems and listed for the applications below. Part Number: AC-209D Fits Allis Chalmers - CA,...
  • Allis-Chalmers D10 D12 D15 H3 Water Pump 79004256, display image of a used water pump with a gasket and orange tag.

    Allis-Chalmers D10 D12 D15 H3 Water Pump 79004256 (Display)

    Allis-Chalmers
    $119.00
    456
    Part Number: 79004256 Allis-Chalmers Water Pump This new water pump is listed for Allis-Chalmers D10, D12, D15, and H3 models. It comes with a fixed pulley and gasket. Fits Allis-Chalmers...
  • Allis-Chalmers D14 D15 Clutch Inspection Cover Plate 227610, orange circular metal cover plate for clutch inspection.

    Allis-Chalmers D14 D15 Clutch Inspection Cover Plate 227610 (Display)

    Allis-Chalmers
    $15.75
    546
    Clutch inspection cover plate for Allis-Chalmers D14 and D15 tractors. Replaces: 227610, 70227610 Note: May vary in color. Primed for convenience. Part Number: AC-1507D Fits Allis-Chalmers...
  • A blue metal right hand side panel (display) for Allis-Chalmers D14 D15 farm tractors, with multiple holes and a label in the center indicating it is for model D14, D15, and other specifications.

    Allis-Chalmers D14 D15 Right Hand Side Panel (Display)

    Allis-Chalmers
    $67.50
    719
    Part Number: ACR4027 Right Hand Side Panel Right hand side panel for listed Allis-Chalmers tractors. Comes primered. Fits Allis-Chalmers D14 - gas or diesel Allis-Chalmers D15 - gas or...
  • Allis-Chalmers Distributor Cap Delco ACR1944, displayed used parts or show model for sale.

    Allis-Chalmers Distributor Cap Delco ACR1944 (Display)

    Allis-Chalmers
    $15.00
    493
    New Delco distributor cap for Allis-Chalmers and other tractors using clip-held Delco conversion distributors. Key part number: ACR1944. Replacement numbers: Allis Chalmers 225733; Delco 811735; Case...
  • Allis-Chalmers Lower Water Pipe for D10 D12 D14 D15, used water pipe with a bend and threaded connection, displayed on a beige background.

    Allis-Chalmers Lower Water Pipe for D10 D12 D14 D15 | AC-249D (Display)

    Allis-Chalmers
    $31.75
    512
    Lower water pipe for Allis-Chalmers D10, D12, D14, and D15. Fits gas and LP models. SKU AC-249D. Part Number: AC-249D Fits Allis-Chalmers D10 Allis-Chalmers D12 Allis-Chalmers D14 Allis-Chalmers...
  • Allis-Chalmers Oil Pressure Gauge 0-80 PSI AC-262D, analog display with needle indicating normal oil pressure.

    Allis-Chalmers Oil Pressure Gauge 0-80 PSI AC-262D (Display)

    Allis-Chalmers
    $25.50
    615
    Allis-Chalmers Oil Pressure Gauge 0-80 PSI Part Number: AC-262D This 0-80 PSI oil pressure gauge is listed for the models below. It has 1/8" male pipe threads. Fits Allis Chalmers: A, D15 (DSL), D17...
  • Allis-Chalmers Snap Coupler Bell Hook Spring 70226514, used part displayed on a brown surface with a label below indicating it's for display.

    Allis-Chalmers Snap Coupler Bell Hook Spring 70226514 (Display)

    Allis-Chalmers
    $15.00
    667
    Allis-Chalmers snap coupler bell hook spring for the listed tractors with quick hitch system. Use the fitment information below to confirm application. Part Number: 70226514 Fits Allis-Chalmers...
  • Allis-Chalmers Upper Seat Spacer Pivot Bushing 70227915, display image of a blue cylindrical metal bushing with some rust and wear.

    Allis-Chalmers Upper Seat Spacer Pivot Bushing 70227915 (Display)

    Allis-Chalmers
    $11.00
    681
    Upper seat spacer, pivot for shock absorber for Allis-Chalmers tractors. Sold individually; 2 per tractor. Part Number:...
  • Bullet Style Tail Light Assembly for Allis-Chalmers D14, D15, D17, used parts display, with black casing and red lens, mounted on a metal bolt with green wiring.

    Bullet Style Tail Light Assembly for Allis-Chalmers D14, D15, D17 (Display)

    Allis-Chalmers
    $55.00
    573
    Bullet style tail light assembly for listed Allis-Chalmers, AC Cotton Picker, John Deere, and JD Lawn & Garden applications. Part Number: AB-3023D Fits Allis Chalmers D14 (SN 19001 and up) Allis...
  • Delco Distributor Terminal Insulator Assembly Square Style - AB-500D, used part displayed with a black insulator and metal terminal components on a brown surface.

    Delco Distributor Terminal Insulator Assembly Square Style - AB-500D (Display)

    Allis-Chalmers
    $12.00
    674
    Delco Distributor Terminal Insulator Assembly, Square Style Important: AB-500D is a square-style Delco distributor terminal insulator assembly. It is for Delco distributors only and will not fit IH...
  • Fuel Bail Assembly (Short Bowl), metal component with adjustable screw, used for fuel system maintenance or repair.

    Fuel Bail Assembly (Short Bowl) (Display)

    Allis-Chalmers
    $6.00
    501
    Fuel Bail Assembly (Short Bowl) for Allis-Chalmers and other listed tractor models. New part. Part Number: AB-563D Fits Allis Chalmers: B, IB, C, CA, D10, D12, D14, D15 Gas (up to sn 9001), D17 Gas...
  • Fuel Filter Bail Assembly with Brass Nut, display of used auto part on brown background with label

    Fuel Filter Bail Assembly with Brass Nut (Display)

    Allis-Chalmers
    $10.00
    500
    Fuel Filter Bail Assembly with Brass Nut - AB-236D for the listed tractor models. New part. Part Number: AB-236D Fits Allis Chalmers: 190XT, D21, U, UC, 190 (2.315 Tall Glass Bowl), D15 (Gas (SN:...
  • Headlight Lens w/ Guide Name 4-3/4" (Display), transparent round car headlight lens with a textured surface for vehicle lighting.

    Headlight Lens w/ Guide Name 4-3/4" (Display)

    Allis-Chalmers
    $12.50
    568
    Part Number: IH-352D Headlight Lens w/ Guide Name This 4-3/4" headlight lens has a "GUIDE" marking near the bottom of the lens and a dimpled outer surface. It is interchangeable with the original...
  • Headlight Reflector for Allis-Chalmers and Other Models, shiny chrome round reflector with mounting hole, displayed on a brown background.

    Headlight Reflector for Allis-Chalmers and Other Models (Display)

    Allis-Chalmers
    $11.75
    569
    Part Number: AB-320D Fits Allis Chalmers - B, C, CA, D10, D12, D14, D15 (up to sn 9001), RC, WC, WD, WD45, WF Case - VA, VAC, VAH (all up to sn 5400000) Cockshutt - 20, 30, 40, 50, 540, 550, 560,...
  • Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21, metallic hood latch snap fitting on brown background

    Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21 (Display)

    Allis-Chalmers
    $9.50
    650
    Part Number: CH4000 Hood Latch Snap Latch Hood latch snap latch for select Allis Chalmers tractors, bale throwers, balers, and some Gleaner combines. Strike not included. Fits ALLIS CHALMERS - D10,...