Same Day Shipping On 99% Of Orders

Allis Chalmers D15 Tractor Parts

About the Allis-Chalmers D15

The D15 replaced the D14 in 1960 and carried the compact D Series design into the 1960s. Early D15 tractors used a four-cylinder engine available in gasoline, LP gas, or diesel versions, with more power and an eight-speed transmission option.

There are two main versions to keep in mind: Series I was built from 1960 through 1962, and Series II from 1963 through 1968. Series II tractors received larger gas and LP engines, a dry air cleaner, headlights moved to the rear fenders, and updated hood decals. These changes are why the model year and serial number should be checked before ordering a D15 part.

Serial Number Reference

Serial number locations: On Series I tractors, the tractor serial number is stamped at the left front end of the torque housing. The gasoline engine serial number is on the rear left-hand side behind the carburetor, and the diesel engine serial number is on the top left-hand side of the engine block. On Series II tractors, the tractor serial number is stamped into the flange where the engine and transmission meet on the left side; gasoline engine numbers are at the rear left-hand side near the carburetor, and diesel numbers are on the top left-hand side of the cylinder block.

The table below shows the beginning tractor serial number for each Model D15 year and series:

 

1960-1962
Model D15 year Beginning serial number
1960 - Series I 1,001
1961 - Series I 1,900
1962 - Series I 6,470
1963-1965
Model D15 year Beginning serial number
1963 - Series II 13,001
1964 - Series II 16,928
1965 - Series II 19,681
1966-1968
Model D15 year Beginning serial number
1966 - Series II 21,375
1967 - Series II 23,734
1968 - Series II 25,127

Total production: 7,169 Model D15 tractors: 6,212 gas/LP and 957 diesel.

Sort By:

Display Type:
Filters
  • Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose, display of a vintage metal emblem with orange and silver colors, featuring large letters A-C and the words Allis-Chalmers.

    Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose (Display)

    $27.25
    528
    Persian Orange #1 Emblem for Allis-Chalmers steering wheel and front nose applications. Die cast, chromed, painted Persian #1 background. Part Number: A9900 Fits Allis Chalmers - ED40, D10, D12,...
  • Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson, display showing a metallic bolt with a hexagonal head, screw threads, and a tapered end.

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson (Display)

    $7.00
    662
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini. Use with parallel or 90 degree...
  • Thermostat 160 Degrees for Allis-Chalmers and More, displaying a used metal component with a label indicating it's a display item.

    Thermostat 160 Degrees for Allis-Chalmers and More (Display)

    $31.75
    506
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter. Fits the listed tractor applications below. Part Number: IH-913D Fits Allis Chalmers: B (Engine SN: 126210 & up when equipped...
  • Traction Booster Gauge for Allis-Chalmers (Display)

    Traction Booster Gauge for Allis-Chalmers (Display)

    $87.00
    705
    Working Traction Booster Gauge for Allis-Chalmers tractors. This gauge is listed as fully functional and is intended for the models shown below. Part Number: AC-124D Fits Allis-Chalmers...
  • Universal Oil Pressure Gauge, black dial with white markings and needle indicating pressure, mounted in a silver metal casing.

    Universal Oil Pressure Gauge 0-50 LB (Display)

    $17.50
    622
    Universal oil pressure gauge with a 0-50 LB range and the applications listed below. Black face with white letters, chrome bezel, and no logo. Part Number: AB-082D Fits Allis Chalmers - WD45 Dsl,...
  • Universal Oil Pressure Gauge, black dial display with a range of 0-80 lb and a white needle pointing to roughly 10 lb pressure.

    Universal Oil Pressure Gauge 0-80 lb (Display)

    $19.75
    621
    Part Number: AB-005D Universal Oil Pressure Gauge This 0-80 lb oil pressure gauge is for various tractor models. It has 1/8" male pipe threads, a black face with white letters, and a chrome bezel...
  • Water Temperature Gauge (Display), black dial with white markings and needle showing temperature from 0 to 220 degrees Fahrenheit.

    Water Temperature Gauge (Display)

    $27.75
    625
    Part Number: AB-239D Water Temperature Gauge This water temperature gauge reads 100 to 280 degrees and includes a 6-foot capillary tube, lighting, and mounting hardware. It has a chrome bezel and...
  • Zenith Carb Float for Allis-Chalmers WD45, D15, D17, display of used carburetor float with metallic components and mounting clip, on brown background with part label.

    Zenith Carb Float for Allis-Chalmers WD45, D15, D17 (Display)

    $19.75
    691
    Zenith carb float for the listed applications. Verify the carburetor manufacturer number before ordering, since fitment depends on the carb MFG number. Part Number: AB-452D Fits Allis-Chalmers: WD45,...
  • Zenith Carburetor Float, used display product for carburetor adjustment and operation.

    Zenith Carburetor Float (Display)

    $13.50
    689
    Zenith carburetor float for listed applications. Verify your carburetor manufacturer number before ordering. Part Number: AB-190D Fits Allis Chalmers: B, IB, C, CA, WF, RC w/ zenith 9492 or 9507,...
  • Zenith Carburetor Float, used display set of two brass floats for carburetors on a brown background with a label indicating used parts.

    Zenith Carburetor Float (Display)

    $27.75
    690
    Zenith Carburetor Float AB-454D. Check the carburetor number carefully before ordering. Fits the listed tractor applications and Zenith carburetor numbers below. Part Number: AB-454D Fits Allis...