Hitches & Drawbars

Allis Chalmers - CA, D10, D12, D14, D15, D17, WD, WD45, WC, WF Drawbar Clamp replaces - 70224650, 224650

Allis Chalmers - CA Snap Coupler Drawbar Release Trip Lever Replaces - 70226673, 226673

Allis Chalmers - Various with 5/8" hole 5/8" Drawbar lock

Allis Chalmers - Various with 1/2" hole 1/2" Drawbar lock

Allis Chalmers - CA Replaces - 225138 70225138 Drawbar Pivot Pin - 7" Long 0.872" Diameter Shaft

Allis Chalmers - D17, D19, 170, 175, 180, 185, 190, 200, Early 7000 Red Belly Lift Arm Housing Gasket Replaces - 70237584 237584  

ALLIS CHALMERS - CA, D10, D12 AFTERMARKET SNAP COUPLER DRAWBAR MADE IN THE USA

ALLIS CHALMERS - CA, WD, WD45, D10, D12, D14, D15, D17 SERIES I II III (NOT SERIES IV) Clevis Pin Locating Guide 70220873 Cotter Pin / R-Clip 70922002 Clevis pin & R-Clip for Drawbar Hanger / Draw Bar Cradle. 0.742" Shaft OD, 2.000" from...

ALLIS CHALMERS - D17 SERIES I, II, III (WILL NOT WORK ON D17 SERIES IIII) TOP LINK BRACKET FITS BETWEEN THE SEAT AND THE TRANSMISSION KI1239 MADE IN THE USA

ALLIS CHALMERS - B, IB, C   ALLIS CHALMERS DRAWBAR EXTENSION PLATE ADD ON. USE WITH TRACTOR WITH HORSE-SHOE SHAPED DRAWBAR. ALLOWS YOU TO USE PTO SHAFT IMPLEMENTS BEHIND TRACTOR.   70215512,, 215512 MADE IN THE USA

Allis Chalmers - D10, D12, D15, and other models with Category 1 3 Point Lower Lift Arm Heavy Duty - Requires 2 per Tractor Category 1 7/8" diameter 31-3/4" center to center of ball MUST DRILL HOLE IN ARM FOR CLEVIS PIN

Allis Chalmers - D10, D12, D15 Lift Arm Clevis - Requires 2 per Tractor Replacement - 70235820, 235820

Allis Chalmers - D10, D12, D15 Trunnion Lift Rod - Requires 2 per Tractor Replacement - 70234884, 234884

Allis Chalmers - D10, D12, D15 Hitch Lift Rod - Requires 2 per Tractor Replacement - 70235823, 235823

Allis Chalmers - D10 (SN 3501 & up), D12 (SN 3001 & up) Replacement - 70236375, 236375 Drawbar Hanger / Bail Assembly for Retractable Drawbar with 3 Point Hitch Note*** D10 and D12 Series III (SN 9001 & up) Mounting Hole Need To Be...

Allis Chalmers - D10 (SN 3501 & up), D12 (SN 3001 & up) Replacement - 70236371, 236371 Retractable Drawbar for 3 Point Hitch Overall Length 33"

Allis Chalmers B, C Drawbar / Hitch Brace Pair 70506023 Allis Chalmers - B, C Replacement - 70506023 Made to OE Specifications

AGCO Tractor - 4650 (and OTHER MODELS USING CAT 1 THREE POINT HITCH) Allis Chalmers - [ D10, D12, D14, D15, ED40, I40, I400, I60, I600, 160, 5015, 5020, 5030, 5040, 5045, 5050, 6040, 6140 (and OTHER MODELS USING CAT 1 THREE POINT HITCH) ]Deutz - [ D2505,...

Allis Chalmers - G Tractor (SN 26751 & Up)Replacement - 70800836, 800836Fits Drawbar KI1082 (70800456)

Allis Chalmers - G Tractor (SN 26751 & Up) Replacement - 70800456, 800456 If Drawbar Clip / Bracket is needed purchase KI1083 (70800836)

Allis Chalmers - CA, D10, D12 Replacement - 70226658, 226658 Comes Primered

ITEM # DJS313 Allis Chalmers Rivet For Snap Couplers Used to attach springs Sold Individually

Allis Chalmers - B, IB, C, CA, WD, WD45, D10, D12, D14, D15, D17, D19 with quick hitch system Replaces: 70226514, 226514

Allis Chalmers - LIKE ORIGINAL ON G (up to sn 26750); FUNCTIONAL ON G (sn 26751 and up) MADE IN USA, 21-3/16" LONG Replacement part for: 800455, 70800455

Allis Chalmers: WD, WD45Replacement for: 223187, 226522 (comes primer grey)

Allis Chalmers: GMADE IN THE USAReplacement part for: 800454

Allis Chalmers - CA, 190XT, D10, D12, D14, D15, D17, D19, WD, WD45, 190; Replacement for: 70327360, 70235881, 327360, 235881 3-1/4" OVERALL LENGTH4 USED PER TRACTORSOLD INDIVIDUALLYCA used a different spring that is no longer available but this spring...

Allis Chalmers - 190XT, D10, D12, D14, D15, D17, D19, WD, WD45, 190 Some Parts Also Fit: CA ((Spring #327360, Rivet #917923, & Washer #910532) ) Replacement for: (screw rivet): 917923, (jam nut): 918935, (washer plain): 910532, (set screw): 900662,...

Allis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT HITCHCase: 730, 830, 930, 1030, 770, 870, 970, 1070, 1170, 1175, 1090, 2090, 2290; and OTHER MODELS USING CAT 2 THREE POINT HITCHCockshutt: 560,...

Item # AB-1433D Allis Chalmers: Various Avery: Various Case: Various Cockshutt: Various Ford: Various IH / Farmall: Various JD: Various Massey Ferguson: Various Massey Harris: Various MM: Various Oliver: Various Use on tractors with Category 2 3PT...

Item # MI-119DAllis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey HarrisMMOliver3-POINT EQUIPPED TRACTORS/IMPLEMENTS USING 7/16" DIAMETER PINS.420" DIA PIN - 1-5/8" USEABLE LENGTH - 1-5/8" DIA RINGcross reference mis119

Item # AB-1427D Allis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey HarrisMMOliver FOR TRACTORS USING CATAGORY 1 3PT WITH 4-3/4" USEABLE LENGTH. 3/4" OD - 4-3/4" useable length - 6-1/2" overall lengthReplacement for: JD: PM00077 -...