Same Day Shipping On 99% Of Orders

Allis Chalmers RC Tractor Parts

About the Allis-Chalmers RC

The RC was a short-lived row-crop tractor introduced in 1938 between the B and the C. Allis-Chalmers used the B engine in a WC-style chassis, so the RC could use the same implements as the WC while offering a lower-cost option.

The RC was built from 1938 through 1941, and the Model C replaced it. That short production run means the RC is less common today than the B, C, or WC.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the rear face of the rear axle housing.

The table below shows the beginning tractor serial number for each Model RC year:

 

1939-1939
Model RC year Beginning serial number
1939 4
1940-1940
Model RC year Beginning serial number
1940 4,392
1941-1941
Model RC year Beginning serial number
1941 5,417

Total production: 5,501 Model RC tractors.

Allis-Chalmers RC Paint Reference

For restoration planning, the Allis-Chalmers RC is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers RC paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Black Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • A black felt-like seal, a gray metal washer, and a flat, circular metal retainer ring, all components of an Allis-Chalmers Front Hub Oil Seal Kit with washer and retainer.

    Allis-Chalmers Front Hub Oil Seal Kit With Washer And Retainer

    Allis-Chalmers
    $14.75
    FWSKAC2
    Front hub oil seal kit with washer and retainer for select Allis-Chalmers tractors. New condition.Part Number: FWSKAC2FitsAllis Chalmers D10 (w/ 5 bolt front hub SN: 3501 & up and High Clear up to...
    Add to Cart
  • A white crankshaft oil wick, part number 70204061, designed for Allis-Chalmers farm tractors.

    Allis-Chalmers Crankshaft Oil Wick 70204061

    Allis-Chalmers
    $16.50
    70204061
    Crankshaft oil wick for select Allis-Chalmers tractors and listed engine sizes.Part Number: 70204061FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers CAAllis Chalmers RCAllis...
    Add to Cart
  • A manual for aftermarket Fairbanks Morse FM-J magneto parts, specifically types FM-J4A and FM-J4A-2 for Allis-Chalmers farm tractors. The cover is beige with black text and an illustration of the magneto.

    Fairbanks Morse FM-J Magneto Parts & Instruction Manual

    Aftermarket
    $23.25
    MANFMJ
    Fairbanks Morse FM-J Magneto Parts & Instruction Manual for Allis Chalmers B, IB, C, CA, RC, WC, WF, WD, and WD45, plus various other models.Part Number: MANFMJFitsAllis Chalmers BAllis Chalmers...
    Add to Cart
  • A universal 2-position push-pull switch designed for Allis-Chalmers farm tractors, not for automobiles.

    Universal 2 Position Push Pull Switch

    Allis-Chalmers
    $13.50
    DJS398
    Universal 2 position push pull switch for agricultural and light industrial equipment. For ignition switch applications, it can be used only on battery ignition systems.Switch is a 10amp switch with...
    Add to Cart
  • A metallic flexible choke cable with a round black knob at one end, labeled 'CHOKE,' designed for Allis-Chalmers farm tractors.

    Universal Choke Cable 64"

    Allis-Chalmers
    $19.75
    AC-17033019
    Universal Choke Cable with 64" metal sheathed cable length.Part Number: AC-17033019FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousIH / Farmall - Hydro 70, Hydro 86, 300,...
    Add to Cart
  • Two brass fuel line adapter fittings with threaded ends, designed for Allis-Chalmers farm tractors, not made for automobiles.

    Fuel Line Adapter Fitting

    Allis-Chalmers
    $5.00
    AB-4285D
    Fuel Line Adapter Fitting for tractors and equipment using 5/16" fuel line.Part Number: AB-4285DFitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsInternational :...
    Add to Cart
  • A rusty, used Allis-Chalmers base oil filter assembly with a long, slender bolt attached, lying on a plain surface. The image highlights the worn and aged condition of the part.

    Used Allis Chalmers Base Oil Filter Assembly ( )

    Allis-Chalmers
    $10.00
    230
    Used Allis Chalmers base oil filter assembly (230) with missing stand pipe.We have new stand pipes available see part # KI1189.Part Number: 230FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers...
    Add to Cart
  • A collection of four rusty bolts with square or round heads, used for Allis-Chalmers farm tractors, resting on a light-colored surface.

    Used Allis Chalmers WC, RC Square Head Bolt - 187

    Allis-Chalmers
    $20.00
    187
    Part Number: 187Allis Chalmers Square Head BoltUsed part sold individually.FitsWCRCNotesNo returns accepted on used items.Sold individually.Ordering NotesUsed part; review photos and product details...
    Add to Cart
  • An Allis-Chalmers universal 12V LED fender and cab warning light in amber and red colors, designed for farm tractors, with wiring attached for connection.

    Universal 12V LED Fender & Cab Warning Light Amber / Red

    Allis-Chalmers
    $59.75
    AB-3538D
    Universal 12V LED fender and cab warning light with amber and red diodes.Includes mounting stud with nut and washers.Part Number: AB-3538DFitsAllis-Chalmers - various modelsCase - various...
    Add to Cart
  • Allis-Chalmers Electronic Cutout Relay for Allis-Chalmers B C CA WD45, mounted on a metallic bracket with two nuts on top, labeled with technical specifications.

    Electronic Cutout Relay for Allis-Chalmers B C CA WD45

    Allis-Chalmers
    $32.00
    DJS1002
    Electronic cutout relay for Allis-Chalmers B, C, CA, IB, IU, M, RC, U, UC, WC, WD, WD45, and WF models.25 amp relay works with 6, 12, or 24 volts and positive or negative ground.Part Number:...
    Add to Cart
  • A headlight assembly designed for Allis-Chalmers WD, WD45, WC farm tractors, featuring a round, clear lens and a black mounting frame, with a wiring cord attached, intended for 12 Volt electrical systems.

    Allis-Chalmers WD WD45 WC 12 Volt Headlight Assembly

    Allis-Chalmers
    $57.75
    AC-150V12
    12 volt headlight assembly with a 4-3/4" diameter curved lens.Part Number: AC-150V12FitsAllis Chalmers - WD, WD45, RC, WC, WFCase - VA, VAC, VAH (up to sn 5400000)Cockshutt - 550, 560, 570Massey...
    Add to Cart
  • A metallic cylindrical tube with knurled grip at one end and a small hole drilled near the end, designed for Allis-Chalmers farm tractors, product number 70203899.

    Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899

    Allis-Chalmers
    $19.75
    KI1189
    Allis-Chalmers oil filter tube element stand pipe for the listed Allis-Chalmers and AC Misc. applications.Part Number: KI1189FitsAllis Chalmers - G, B, C, CA, IB, RC, WC, WF, WD, WD45, D10, D12, D14,...
    Add to Cart
  • A kit containing pistons, sleeves, rings, pins, and various gaskets designed for Allis-Chalmers farm tractors such as models B, C, CA, IB, and RC.

    Pistons, Sleeves and Rings Kit for Allis-Chalmers B, C, CA, IB, RC

    Allis-Chalmers
    $425.00
    ACR2326
    Part Number: ACR2326FitsAllis-Chalmers BAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers IBAllis-Chalmers RCSpecs3-7/16 over boreKit includes flat top pistons, sleeves, O-rings, piston rings, and pins
    Add to Cart
  • Allis-Chalmers Deluxe Steering Wheel Spinner, a tractor accessory designed to be attached to farm tractors, not automobiles. It features a textured, ergonomic knob with a mounting base.

    Deluxe Steering Wheel Spinner

    Allis-Chalmers
    $17.75
    WSDX1
    Deluxe Steering Wheel Spinner for various tractor models.Part Number: WSDX1FitsAllis Chalmers - VariousAvery - VariousCase - VariousCockshutt - VariousFord - VariousIH / Farmall - VariousJohn Deere -...
    Add to Cart
  • A brass bushing for Allis-Chalmers farm tractors, specifically the Front Governor Shaft Bushing for models B, C, CA, D10, D12, D14, D15.

    Allis-Chalmers Front Governor Shaft Bushing B C CA D10 D12 D14 D15

    Allis-Chalmers
    $14.75
    AC-3739D
    Front Governor Shaft Bushing for Allis-Chalmers tractors and combines.Part Number: AC-3739DFitsAll the following gas and LP tractors: B, C, CA, D10, D12, D14, D15, D272, IB, RCAllis Chalmers Combines...
    Add to Cart
  • A close-up image of a gold-colored metal bushing, identified as a governor gear bushing for Allis-Chalmers farm tractors, specifically models B, C, CA, D10, D12, D14, D15.

    Allis-Chalmers Governor Gear Bushing B C CA D10 D12 D14 D15

    Allis-Chalmers
    $19.75
    AC-3733D
    Governor Gear Bushing for Allis-Chalmers tractors and combines.Part Number: AC-3733DFitsAll gas and LP tractors: B, C, CA, IB, RC, D10, D12, D14, D15, D272Allis Chalmers Combines - 60, 60A, 60H, 66,...
    Add to Cart
  • Image of a Zenith Carburetor designed for Allis-Chalmers farm tractors including models B, C, CA, RC, D10, D12.

    Zenith Carburetor for Allis-Chalmers B, C, CA, RC, D10, D12

    Allis-Chalmers
    $386.00
    1603-0002
    Zenith style replacement carburetor for Allis-Chalmers tractors. Bolt spacing is 2 5/16" C to C and it can be used with or without cable choke.Part Number: 1603-0002FitsAllis Chalmers - IB, RC, B, C,...
    Add to Cart
  • Allis-Chalmers sediment bowl assembly for farm tractors, shown with metal components, a transparent bowl at the bottom, and an attached valve and brass fittings.

    Sediment Bowl Assembly for Allis-Chalmers B, C, CA, IB, RC, D14, D15, D17, D19

    Allis-Chalmers
    $29.75
    AB-092D
    Sediment Bowl Assembly for Allis-Chalmers B, C, CA, IB, RC, D14, D15, D17, and D19. Confirm the fuel bowl style and outlet before ordering.Includes a shallow bowl with a 90 degree outlet only.Part...
    Add to Cart