Same Day Shipping On 99% Of Orders

Allis Chalmers WF Tractor Parts

Allis-Chalmers WF Tractor Parts

About the Allis-Chalmers WF

The Allis-Chalmers WF was the standard-tread counterpart to the row-crop WC. It used a four-cylinder gasoline engine, four-speed transmission, and a standard front axle for general farm work rather than cultivating between rows.

The WF was built from 1937 through 1951. Early tractors had the square radiator, while the styled WF began during the 1940 production year and continued through 1951. The serial number table shows where the change occurred.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the differential housing at the rear of the tractor.

The table below shows the beginning tractor serial number for each WF year and styling:

 

1937-1941
Model WF year Beginning serial number
1937 - Unstyled 4
1938 - Unstyled 389
1939 - Unstyled 1,336
1940 - Unstyled 1,892
1940 - Styled 1,904
1941 - Styled 2,300
1942-1946
Model WF year Beginning serial number
1942 - Styled 2,704
1943 - Styled Not listed
1944 - Styled 3,004
1945 - Styled 3,195
1946 - Styled 3,510
1947-1951
Model WF year Beginning serial number
1947 - Styled 3,748
1948 - Styled 4,111
1949 - Styled 5,500
1950 - Styled 7,318
1951 - Styled 8,316

Total production: Unknown.

Allis-Chalmers WF Paint Reference

For restoration planning, the Allis-Chalmers WF is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers WF paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1, Black Persian Orange 1, Black Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Temperature Gauge Black Needle, water temperature gauge with a black needle for Allis-Chalmers tractors models B, IB, C, CA, RC, WC, WD, WD45, WF.

    Allis Chalmers Temperature Gauge Black Needle for B IB C CA RC WC WD WD45 WF

    Allis-Chalmers
    $31.75
    ACR0934
    Allis Chalmers temperature gauge with a white face and black needle. It has the Allis Chalmers name, screws into the radiator neck, and is like original.Part Number: ACR0934FitsAllis Chalmers BAllis...
    Add to Cart
  • Aftermarket 12V Distributor Hot Coil 55000 Volts Internally Resisted, black electrical coil component with mounting brackets and terminal connectors.

    12V Distributor Hot Coil 55000 Volts Internally Resisted

    Aftermarket
    $59.75
    AB-6158D
    12V distributor hot coil with 55,000 volts and internally resisted design. No external resistor required.Works with or without electronic ignition system.Part Number: AB-6158DFitsAllis Chalmers - B,...
    Add to Cart
  • Allis-Chalmers Premium Distributor Cap 4 Cylinder, close-up view of black distributor cap designed for various tractors including Allis Chalmers, Avery, Case, Cockshutt, International/Farmall, John Deere, Massey Ferguson, Massey Harris, Minneapolis Moline, Oliver.

    Premium Distributor Cap 4 Cylinder for Allis Chalmers, Avery, Case, Cockshutt, International/Farmall, John Deere, Massey Ferguson, Massey Harris, Minneapolis Moline, Oliver

    Allis-Chalmers
    $18.75
    AB-6165D
    distributor cap for 4-cylinder applications.~ Brass contacts, Bakelite ~ MADE IN USAPart Number: AB-6165DFitsAllis Chalmers: D10, D12, D14, D15, D17, RC, H3, B, IB, C, G, CA, WD, WD45, WC, WFAvery:...
    Add to Cart
  • Allis-Chalmers Exhaust Manifold Side Pipe, black metal exhaust pipe for Allis Chalmers WC and WF tractors.

    Exhaust Manifold Side Pipe for Allis Chalmers WC WF

    Allis-Chalmers
    $28.75
    70203180
    Exhaust manifold side pipe for Allis Chalmers WC and WF. Fits the AC-085D manifold with 45 degree side exhaust. Part Number: 70203180 Fits Allis Chalmers: WC, WF AC-085D Manifold with
    Add to Cart
  • Pertronix Electronic Ignition Conversion Kit 6V Positive Ground for Allis Chalmers, image of electronic ignition components including wiring, a rotor, and other installation parts.

    Electronic Ignition Conversion Kit 6V Positive Ground for Allis Chalmers B, IB, C, CA, D10, D12, D14, D15, D17, G, WC, WD, WD45, WF

    Pertronix
    $237.50
    ACR3188
    Electronic Ignition Conversion Kit for 6V positive ground Allis-Chalmers applications. Replaces points and condenser with a breakerless solid-state ignition system that fits under the stock...
    Add to Cart
  • Allis-Chalmers Timing Gear Cover Gasket, engine timing gear cover gasket for Allis Chalmers D17, WC, WD, WD45, WF, 170, 175 with part number 70233214.

    Timing Gear Cover Gasket Allis Chalmers D17 WC WD WD45 WF 170 175 70233214

    Allis-Chalmers
    $9.75
    70233214
    Timing gear cover gasket for select Allis Chalmers models. Check engine serial details before ordering.0.032" thick with 7 mounting holes and 7/16" mounting hole ID.Part Number: 70233214FitsWD, WD45,...
    Add to Cart
  • A metal side exhaust manifold designed for Allis-Chalmers farm tractors, specifically for the model WC WF, with a 45-degree angle.

    Allis Chalmers WC WF 45 Degree Side Exhaust Manifold

    Allis-Chalmers
    $324.75
    AC-085D
    Allis Chalmers - (Both up to eng. SN 106509; Unstyled & Early Styled): WC, WFPart Number: AC-085DReplaces / Cross Reference70229940, 229940, 70203178, 203178NotesManifold 45 Degree Side Exhaust Gas...
    Add to Cart
  • A black radiador designed for Allis-Chalmers farm tractors, specifically for models WC, WF, WD, WD45, with the part number 70228587.

    Allis Chalmers WC WF WD WD45 Radiator 70228587

    Allis-Chalmers
    $429.50
    70228587
    Radiator for Allis Chalmers Styled WC, WF, WD, and WD45 gas tractors.Bottom tank spout is sheet metal. Clear plastic tubing for overflow. Radiator cap included.Part Number: 70228587 FitsAllis...
    Add to Cart
  • A metal governor rod linkage spring with a coil in the middle, two hooks on either end, used for Allis-Chalmers farm tractors such as WD, WD45, WC, WF, B, C, and IB.

    Governor Rod Linkage Spring - Allis Chalmers WD, WD45, WC, WF, B, C, IB

    Allis-Chalmers
    $14.75
    70203208
    Part Number: 70203208Governor Rod Linkage SpringGovernor rod linkage spring for Allis Chalmers tractors. Serial qualifiers are listed for B, C, and IB models.FitsAllis Chalmers WDAllis Chalmers...
    Add to Cart
  • An aftermarket inline fuel filter with two black rubber hoses, two metal clamps, and a metal housing, designed for Allis-Chalmers farm tractors.

    Inline Fuel Filter 33033

    Allis-Chalmers
    $8.75
    33033
    Part Number: 33033Inline Fuel FilterIn-line fuel filter for use with 3/8" fuel lines. Includes hose and clamps and is Used to help keep rust and dirt out of the carburetor.FitsAllis Chalmers -...
    Add to Cart
  • A sediment bowl filter for Allis-Chalmers farm tractors, featuring a tall bowl assembly with a filter element inside. The filter has a metal body, a glass bowl for sediment collection, and a brass shut-off valve at the side. The image notes that the product is for illustrative purposes and the sediment bowl assembly is not included.

    Sediment Bowl Filter for Tall Bowl Assemblies

    Aftermarket
    $12.25
    DJS3039
    Fuel filter only. Sediment bowl not included. This fits our sediment bowl assembly ACR2406 and also fits replacement glass bowl
    Add to Cart
  • A connecting rod bearing with a 0.030 undersize, designed for Allis-Chalmers farm tractors. The bearing is circular with a split for installation.

    Allis-Chalmers Connecting Rod Bearing 0.030 Undersize

    Allis-Chalmers
    $14.75
    AC-4006D
    Allis Chalmers - D17, WD, WD45, 170, 175, WC, WF0.030" undersize connecting rod bearing sold per journal.Part Number: AC-4006DFitsD17, WD, WD45, 170, 175 (Gas, LP with G201, G226 engines.)WC, WF...
    Add to Cart
  • A set of three engine main bearing shells, with one bearing shell shown from the top and another from the inside, all designed for Allis-Chalmers farm tractors. The bearings are gold-colored with a smooth surface and have cutouts for installation. They are labeled as 0.020 undersize.

    Allis-Chalmers Main Bearing Set 0.020 Undersize

    Allis-Chalmers
    $129.75
    AC-2774D
    Allis Chalmers - WC, WD, WD45, WFUndersized 0.020 main bearing set for G201 and G226 engines with front thrust bearing.Part Number: AC-2774DFitsAllis Chalmers WC, WD, WD45, WFG201 and G226 w/ Front...
    Add to Cart
  • A set of three metal main bearing components, designed for Allis-Chalmers farm tractors, specifically for the WC, WD, WD45, and WF models. The bearings are cylindrical with openings, one of which appears to have a layered or coated interior surface.

    Standard Main Bearing Set for Allis-Chalmers WC WD WD45 WF

    Allis-Chalmers
    $129.75
    AC-2770D
    Standard main bearing set for Allis-Chalmers WC, WD, WD45, and WF.New part sold under store SKU AC-2770D.Part Number: AC-2770DFitsAllis Chalmers - WC, WD, WD45, WFG201 and G226 w/ Front Thrust...
    Add to Cart
  • A close-up image of a gold-colored metal stop and bolt designed for Allis-Chalmers farm tractors. The stop has a rectangular, hollowed-out section, and the bolt has a threaded shaft with a hexagonal head.

    Rear Spinout Rim Stop & Bolt for Allis-Chalmers and More

    Allis-Chalmers
    $24.00
    70219456
    Rear spinout rim stop & hex bolt included for parallel drilled rim rails.New part sold under store SKU 70219456.Part Number: 70219456FitsAllis Chalmers - CA, D10, D12, D14, D15, D17, D19, WD, WD45,...
    Add to Cart
  • A 9-inch pressure plate clutch for Allis-Chalmers farm tractors, designed for several models including B, IB, C, CA, D10, D12, D14, and WF. The clutch assembly is metallic with multiple attachment points and levers for installation.

    9" Pressure Plate Clutch for Allis-Chalmers B, IB, C, CA, D10, D12, D14, WF

    Allis-Chalmers
    $261.00
    70228926
    9" pressure plate clutch for Allis-Chalmers B, IB, C, CA, D10, D12, D14, and WF.Part Number: 70228926FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers D10 (UP to...
    Add to Cart
  • A metallic, round aftermarket mini Denso alternator pulley with a central hole, designed for use on Allis-Chalmers farm tractors, not for automobiles.

    Mini Denso Alternator Pulley AB-2315D

    Aftermarket
    $39.75
    AB-2315D
    Alternator Pulley Part Number: AB-2315D This alternator pulley is listed for the AB-535D Mini Alternator and select Denso alternators shown below. Review the dimensions before ordering. Fits AB-535D...
    Add to Cart
  • A set of three undersized main bearing shells for Allis-Chalmers farm tractors, specifically for WD, WD45, and WF models, not suitable for automobiles.

    Allis-Chalmers Main Bearing Set Undersized 0.010 WC WD WD45 WF

    Allis-Chalmers
    $129.75
    AC-2772D
    Main bearing set for Allis-Chalmers tractors listed below.Part Number: AC-2772DFitsAllis-Chalmers WCAllis-Chalmers WDAllis-Chalmers WD45Allis-Chalmers WFG201 with Front Thrust BearingG226 with Front...
    Add to Cart