Same Day Shipping On 99% Of Orders

Allis Chalmers 190 Tractor Parts

The Allis-Chalmers One-Ninety was introduced in 1964 as a larger row-crop tractor while the D Series was still in production. It used a six-cylinder gasoline or diesel engine, power steering, Allis Snap-Coupler, and the Power Director system for live PTO operation.

The 190 was built through 1972 and was part of the larger tractor line that also included the 190XT. The 190 and 190XT can look similar, so check the model marking and serial number to make sure you are looking at the correct information.

Serial number locations: The tractor serial number is stamped on the left side of the tractor in the flange where the engine and transmission meet. The engine serial number is on a nameplate at the upper left side of the cylinder block.

The table below shows the beginning tractor serial number for each Model 190 year:

 

1964-1966

Model 190 year Beginning serial number
1964 1,001
1965 2,485
1966 8,219

1967-1969

Model 190 year Beginning serial number
1967 13,273
1968 19,262
1969 23,234

1970-1972

Model 190 year Beginning serial number
1970 25,901
1971 29,136
1972 31,118

Total production: 4,726 Model 190 tractors; fuel-type production totals were not available.

Filter By

Sort By:

Display Type:
Filters
  • Aftermarket Top Link, industrial mechanical linkage component for heavy machinery or agricultural equipment, shown with a rod and mounting eye

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT HITCHCase: 730, 830, 930, 1030, 770, 870, 970, 1070,...
  • Aftermarket 3 PT Lynch Pin, metallic pin with a circular ring for securing attachments in farming equipment.

    3 PT Lynch Pin

    Aftermarket
    $2.00
    MI-119D
    3 PT Lynch Pin for 3-point equipped tractors and implements using 7/16" diameter pins.Part Number: MI-119DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey HarrisMMOliverReplaces / Cross Referencecross reference...
  • Allis-Chalmers AMMETER (AMP) GAUGE, 60-0-60 - AB-466D

    AMMETER (AMP) GAUGE, 60-0-60

    Allis-Chalmers
    $19.75
    AB-466D
    Ammeter (amp) gauge with a 60-0-60 range, chrome bezel, and no logo.Fits most tractors equipped with an alternator and a 2" diameter hole.Part Number: AB-466DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey...
  • Allis-Chalmers Allis Chalmers Amp Gauge B C CA G WC WD WD45 WF D14 D15 D17

    Allis Chalmers Amp Gauge

    Allis-Chalmers
    $29.75
    AC-258D
    Allis Chalmers amp gauge with a chrome bezel and restoration quality finish.Fits the Allis Chalmers models listed below.Part Number: AC-258DFitsAllis Chalmers: B, C, CA, G, WC, WD, WD45, WD45D, WF, D10, D12, D14, D15, D17, D19, D21, RC, 170, 175, 180,...
  • Allis-Chalmers Ammeter Amp Gauge (30-0-30)

    Ammeter Amp Gauge (30-0-30)

    Allis-Chalmers
    $19.75
    AB-109D
    Ammeter amp gauge with a 30-0-30 range, chrome bezel, and 2" diameter hole fitment.Fits the tractor models and applications listed below.Part Number: AB-109DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series I,...
  • Aftermarket In-Line Fuel Filter AB-490D

    In-Line Fuel Filter for Various Models

    Aftermarket
    $12.95
    AB-490D
    In-line fuel filter for various models using 3/8" fuel lines. Includes hose and clamps.Use to help keep rust and dirt out of the carburetor.Part Number: AB-490DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey...
  • Allis-Chalmers Brass Sediment Bowl Screen, metallic brass disc with a fine mesh pattern for filtering sediment.

    Brass Sediment Bowl Screen

    Allis-Chalmers
    $3.75
    AB-229D
    Brass sediment bowl screen for listed tractors and combines.Part Number: AB-229DFitsAllis Chalmers - 190XT, B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, I40, I400, I60, I600, IB, RC, U, UC, WC, WD, WD45 (Gas & Diesel), WF, 170, 175, 180, 185,...
  • Allis-Chalmers Sediment Bowl Glass, clear transparent glass sediment bowl used in fuel systems for filtration.

    Sediment Bowl Glass

    Allis-Chalmers
    $5.75
    AB-124D
    Sediment bowl glass for listed tractors and combines.Part Number: AB-124DFitsAllis Chalmers - 190XT, D15 (Gas (SN: 9001 & up), & All Diesel), D17 (Gas (SN: 42001 & up) & All Diesel), D19 (Gas (SN: 12001 & up) & All Diesel), D21,...
  • Allis-Chalmers Sediment Bowl Gasket 2-1/8"

    Sediment Bowl Gasket 2-1/8"

    Allis-Chalmers
    $3.00
    JD-642D
    Sediment bowl gasket, 2-1/8". Fits listed Allis-Chalmers and other tractor models listed below.Part Number: JD-642DFitsAllis-Chalmers - 190XT, D15 (Gas models with SN: 9001 & up and all Dsl models), D17 (Gas models with SN: 42001 & up and...
  • Allis-Chalmers 12 Volt Starter Solenoid for Delco Starters

    12 Volt Starter Solenoid for Delco Starters

    Allis-Chalmers
    $23.75
    AB-1179D
    12 volt starter solenoid for Delco starters. For Delco 5MT, 8MT, 10MT, 20MT, 22MT, and 25MT starters. 3 terminals.Part Number: AB-1179DFitsCheck the model and starter number before ordering. Some applications require the listed starter number for correct...
  • Allis-Chalmers DELCO STARTER SOLENOID Allis Chalmers D17 180 185 190 190XT 200 7000 7020

    Delco Starter Solenoid for Allis-Chalmers D17 180 185 190 190XT 200 7000 7020

    Allis-Chalmers
    $39.75
    AB-1366D
    Delco starter solenoid. New 12 volt, 4 terminal unit for 30 and 35 MT series. Fits the listed applications below.Part Number: AB-1366DFitsAllis-Chalmers: D17 DSL (up to sn 38964) (use with starter 1113082), 180, 185, 190, 190XT, 200, 7000, 7020Case: 730,...
  • Allis-Chalmers Tractor Toolbox Universal

    Allis Chalmers Universal Tractor Toolbox

    Allis-Chalmers
    $43.75
    AB-308D
    Universal tractor toolbox for Allis Chalmers and several other tractor brands. Includes the listed applications and dimensions from the supplied data.Part Number: AB-308DFitsAllis ChalmersAveryFord 9NFord 2NIH / FarmallJohn DeereMassey FergusonMassey...
  • Allis-Chalmers Economy Zenith Carburetor Repair Kit Allis Chalmers D19 180 190 190XT, engine parts including gaskets, O-rings, and screws for carburetor repair.

    Economy Zenith Carburetor Repair Kit Allis Chalmers D19 180 190 190XT

    Allis-Chalmers
    $24.75
    AC-1343D
    Economy Zenith carburetor repair kit for the listed Allis-Chalmers and Case applications.Make sure your carburetor manufacturer number is in the list. Throttle shaft is not included.Part Number: AC-1343DFitsAllis Chalmers D19Allis Chalmers 180Allis...
  • Allis-Chalmers Allis Chalmers 190 200 Turbo Elbow 70244418, metal turbo elbow pipe with flange for engine exhaust system.

    Allis Chalmers 190 200 Turbo Elbow 70244418

    Allis-Chalmers
    $89.50
    AC-088D
    The Allis Chalmers 190 200 Turbo Elbow 70244418 is a new replacement part for listed Allis Chalmers tractors and Gleaner combines.Use the fitment and cross reference details below to verify application before ordering.Part Number: AC-088DFitsAllis...
  • Allis-Chalmers Electrical Outlet Socket, metallic electrical outlet with mounting base and screw terminals for device connection.

    Electrical Outlet Socket

    Allis-Chalmers
    $32.75
    AB-395D
    2-pin electrical outlet socket for ALL implements with lights. Fits Allis-Chalmers, Avery, Case, Cockshutt, Ford, IH / Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver applications.Part Number: AB-395DFitsAllis...
  • Allis-Chalmers Holley Carburetor Float for Allis-Chalmers 190 and Ford, automotive engine part with yellow float chambers and metal mounting bracket.

    Holley Carburetor Float for Allis-Chalmers 190 and Ford

    Allis-Chalmers
    $36.75
    AB-1352D
    Holley carburetor float for Allis Chalmers 190 and Ford applications.Part Number: AB-1352DFitsAllis Chalmers: 190Ford: 1965 and up - 2000 (3 Cyl), 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3610, 4000 (3...
  • Allis-Chalmers Zenith Carburetor Float for Allis-Chalmers, Case, John Deere, Massey Ferguson, Oliver, yellow metal carburetor float with attached metal arm.

    Zenith Carburetor Float for Allis-Chalmers, Case, John Deere, Massey Ferguson, Oliver

    Allis-Chalmers
    $22.75
    AB-1355D
    Zenith carburetor float for Allis Chalmers, Case, John Deere, Massey Ferguson, and Oliver applications.Part Number: AB-1355DFitsAllis Chalmers: 190Case: 870, 930, 970John Deere: 3010, 3020, 4000, 4010, 4020, 500 Industrial, 600 IndustrialMassey Ferguson:...
  • Allis-Chalmers Carb Elbow and Strainer Assembly

    Carb Elbow and Strainer Assembly

    Allis-Chalmers
    $8.75
    AB-297D
    Carb elbow and strainer assembly for Allis-Chalmers and other listed tractors. New part with male end screen end 1/8" pipe thread and female end 1/4" flare.Part Number: AB-297DFitsAllis ChalmersAveryCaseCockshuttFord: 9N, 2N, 8N, NAA, Jubilee, 501, 600,...