Same Day Shipping On 99% Of Orders

Allis Chalmers 8010 Tractor Parts

About the Allis-Chalmers 8010

The Allis-Chalmers 8010 opened the 8000 Series in 1982. It used a six-cylinder diesel, independent PTO, hydrostatic power steering, and a standard Acousta cab with heat and air conditioning.

The 8010 was available as a two- or four-wheel-drive row-crop tractor, with a high-crop version also offered. It followed the 7010 and introduced the 8000 Series design used by the 8030, 8050, and 8070.

Serial Number Reference

Serial number locations: The tractor serial number appears on a decal on the left side of the frame just ahead of the fuel tank. It is also stamped into the casting at the rear of the tractor, above and to the left of the PTO shaft.

The table below shows the beginning tractor serial number for each Model 8010 year:

 

1981-1982
Model 8010 year Beginning serial number
1981 1,001
1982 1,020
1983-1984
Model 8010 year Beginning serial number
1983 1,712
1984 2,266
1985-1985
Model 8010 year Beginning serial number
1985 2,609

Total production: 1,832 Model 8010 tractors.

Filter By

Sort By:

Display Type:
Filters
  • A metallic, round aftermarket mini Denso alternator pulley with a central hole, designed for use on Allis-Chalmers farm tractors, not for automobiles.

    Mini Denso Alternator Pulley AB-2315D

    Aftermarket
    $39.75
    AB-2315D
    Alternator Pulley Part Number: AB-2315D This alternator pulley is listed for the AB-535D Mini Alternator and select Denso alternators shown below. Review the dimensions before ordering. Fits AB-535D...
    Add to Cart
  • A round gauge panel designed for farm tractors, showing fuel level, water temperature, and engine temperature with labeled icons and color-coded indicators.

    Allis-Chalmers 6000 7000 8000 Series Fuel Gauge Water Temp Temperature Gauge

    Allis-Chalmers
    $159.75
    AC-4479D
    Fuel gauge, water temp, and temperature gauge for Allis-Chalmers 6000, 7000, and 8000 series tractors. Works with a 1 ohm to 88 ohm sending unit.Part Number: AC-4479DFitsAllis Chalmers 6060Allis...
    Add to Cart
  • A cylindrical metal spindle bushing with a silver exterior and a gold-colored interior, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Spindle Bushing 70267222 7010-8070

    Allis-Chalmers
    $27.75
    AC-5371D
    Allis Chalmers lower spindle bushing for select models. Use this listing for the lower bushing only. Part Number: AC-5371D Fits Allis Chalmers 7010 Allis Chalmers 7020 Allis Chalmers 7030 Allis...
    Add to Cart
  • A cylindrical metal spindle bushing with a smooth exterior and a golden interior, designed for Allis-Chalmers farm tractors, specifically for models such as D21, 210, 220 with part numbers 7010-8070.

    Allis Chalmers Spindle Bushing D21 210 220 7010-8070

    Allis-Chalmers
    $19.50
    AC-5365D
    Allis Chalmers spindle bushing for select models. Application varies by tractor model, with upper and lower spindle bushing notes listed below. Part Number: AC-5365D Fits Allis Chalmers D21 Allis...
    Add to Cart
  • A set of wheel bearing kit parts, including three bearing rings, two roller bearings, and a seal, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Wheel Bearing Kit 7010 7020 7030 7040 7050 7060 7080 8010 8030 8050 8070

    Allis-Chalmers
    $65.00
    WBKAC4
    Wheel bearing kit for Allis Chalmers models 7010 through 8070 as listed.Part Number: WBKAC4FitsAllis Chalmers 7010Allis Chalmers 7020Allis Chalmers 7030Allis Chalmers 7040Allis Chalmers 7050Allis...
    Add to Cart
  • A clutch disc designed for Allis-Chalmers farm tractors, featuring four friction pads and a central spline hub, used in various models including 7010, 7020, 7030, 7040, 7050, 7060, 7080, 8010, 8030, 8070, and 4W220.

    Allis Chalmers 12 Inch 4 Pad Clutch Disc 7010 7020 7030 7040 7050 7060 7080 8010 8030 8070 4W220

    Allis-Chalmers
    $216.75
    70269728
    12" 4 pad clutch disc for Allis Chalmers tractors.Part Number: 70269728Fits70107020703070407050706070808010803080704W220Specs12"4 pad1-1/2" hub23 splineReplaces / Cross Reference702
    Add to Cart
  • An outer air filter for Allis-Chalmers farm tractors, with the part number 70266787. It features a cylindrical design with a white top and a pleated filter element.

    Allis Chalmers Outer Air Filter 70266787

    Baldwin
    $53.50
    70266787
    Outer air filter for listed Allis Chalmers models.Applications include 7010, 7020, 7030, 7040, 7045, and 8010.Part Number: 70266787FitsAllis Chalmers 7010Allis Chalmers 7020Allis Chalmers 7030Allis...
    Add to Cart
  • A metal exhaust manifold gasket with a hexagonal shape and two mounting holes, designed for Allis-Chalmers farm tractors and Gleaner equipment.

    AGCO Exhaust Manifold Gasket for Allis-Chalmers and Gleaner

    AGCO
    $9.50
    74020090
    Exhaust Manifold Gasket. AGCO brand, sold individually.Part Number: 74020090FitsAllis-Chalmers 190Allis-Chalmers 190XTAllis-Chalmers 200Allis-Chalmers 7000Allis-Chalmers 7010Allis-Chalmers...
    Add to Cart
  • Allis-Chalmers Alternator with 72 Amp capacity, 3 wires, model number 74916592.

    Allis-Chalmers Alternator 72 Amp 3 Wire 74916592

    Allis-Chalmers
    $215.50
    74916592
    Allis-Chalmers - 6060, 6070, 6080, 8010, 7000, 7010, 7020, 7030, 7040, 7050, 7080 Alternator, 72 amp, 3 wire, with "R" terminal. Part Number:...
    Add to Cart
  • Image of a set of manifold gasket components, including one rectangular gasket and three gasket pieces with holes, intended for Allis-Chalmers farm tractors.

    Allis-Chalmers Manifold Gasket Set

    Allis-Chalmers
    $30.00
    ACR0280G
    Allis-Chalmers - 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010Gleaner - G, L, L2, L3, M, M2, M3Manifold gasket set, 4 piece. Includes 3 (74020090) and 1 (74028190, 74025781) used with tractors...
    Add to Cart
  • Allis-Chalmers exhaust manifold for farm tractors, compatible with models 190, 190XT, 200, 7000, 7010, 7020, 8010.

    Allis-Chalmers Exhaust Manifold 190 190XT 200 7000 7010 7020 8010

    Allis-Chalmers
    $132.75
    74007652
    Exhaust manifold for Allis-Chalmers tractors.For tractors with D2900 engine fitment, as listed below.Part Number: 74007652FitsAllis-Chalmers 190Allis-Chalmers 190XTAllis-Chalmers 200Allis-Chalmers...
    Add to Cart
  • A grey, circular front wheel hub assembly with eight bolt holes and a central bearing, designed for Allis-Chalmers farm tractors.

    Allis-Chalmers 8 Lug Front Wheel Hub Assembly 70265167

    Allis-Chalmers
    $131.75
    70265167
    Allis-Chalmers - D21, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070Front wheel hub assembly, 8 lug.Part Number:...
    Add to Cart
  • A valve cover gasket for Allis-Chalmers farm tractors, specifically for models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, and 8010. The gasket is elongated and rectangular with multiple small holes along its length for bolts.

    Valve Cover Gasket for Allis-Chalmers 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010

    Allis-Chalmers
    $24.75
    74008074
    Valve cover gasket for Allis-Chalmers tractors, engines, harvesters, and Gleaner combines listed below.Part Number: 74008074FitsAllis Chalmers - 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010Allis...
    Add to Cart
  • Allis-Chalmers Exhaust Manifold Turbo Gasket with part number 74028190.

    Allis-Chalmers Exhaust Manifold Turbo Gasket 74028190

    Allis-Chalmers
    $19.50
    74028190
    Exhaust manifold turbo gasket for select Allis-Chalmers tractors using D2900 engines. New condition.Part Number: 74028190FitsAllis Chalmers 190Allis Chalmers 190XTAllis Chalmers 190XT IIIAllis...
    Add to Cart
  • Image of an Allis-Chalmers Oil Pan Gasket Set, part number 74021022, designed for Allis-Chalmers farm tractors, not for automobiles.

    Allis-Chalmers Oil Pan Gasket Set 74021022

    Allis-Chalmers
    $30.00
    74021022
    Part Number: 74021022Allis-Chalmers Oil Pan Gasket SetOil pan gasket set for the listed Allis-Chalmers models and engine applications.FitsAllis-Chalmers 180Allis-Chalmers 185Allis-Chalmers...
    Add to Cart
  • An Allis-Chalmers thermostat housing gasket, black in color, with a rounded shape and two smaller holes on either side.

    Thermostat Housing Gasket for Allis-Chalmers

    Allis-Chalmers
    $6.75
    74025101
    Thermostat Housing to Block Gasket for Allis-Chalmers equipment. New part.Part Number: 74025101FitsAllis Chalmers - D21, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030,...
    Add to Cart
  • A circular black rubber seal with a metal core, designed for Allis-Chalmers farm tractors, including models 180 to 7020 and Gleaner, used as a timing cover seal.

    Timing Cover Seal for Allis-Chalmers 180 185 190 190XT 200 6060 7020 Gleaner

    Allis-Chalmers
    $34.15
    74024561
    Timing cover seal for select Allis-Chalmers and Gleaner models.Use the measurements below to verify fitment.Part Number: 74024561FitsAllis-Chalmers 180 (w/ G265 (G2500/G2600) Gas or 649 (D2800/D2900)...
    Add to Cart
  • Allis-Chalmers Inner Air Filter for farm tractors, cylindrical with a metal top and base, and a diamond-patterned filtration surface.

    Allis-Chalmers Inner Air Filter

    Allis-Chalmers
    $37.50
    70267953
    Part Number: 70267953Inner Air FilterInner safety air filter for listed Allis-Chalmers tractors.FitsAllis-Chalmers 7010Allis-Chalmers 7020Allis-Chalmers 7030Allis-Chalmers 7040Allis-Chalmers...
    Add to Cart