Same Day Shipping On 99% Of Orders

Allis Chalmers C Tractor Parts

About the Allis-Chalmers C

Allis-Chalmers built the Model C as a small row-crop tractor for farms that needed more room and capability than the Model B. Introduced in 1940, it used a 125-cubic-inch four-cylinder engine and a simple three-speed transmission. Its compact size and row-crop layout made it useful for cultivating, general farm work, and smaller fields.

The Model C was built at West Allis, Wisconsin, through 1949. The CA followed it in 1950, making the C an important link between the early B and the later compact tractors.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on top of the transmission case, behind the shift lever. The engine serial number is on the rear left-hand side of the engine.

The table below shows the beginning tractor serial number for each Model C year:

 

1940-1943
Model C year Beginning serial number
1940 1
1941 112
1942 12,389
1943 18,782
1944-1946
Model C year Beginning serial number
1944 23,908
1945 30,695
1946 36,378
1947-1949
Model C year Beginning serial number
1947 39,168
1948 51,515
1949 68,281

Total production: 84,020 Model C tractors.

Allis-Chalmers C Paint Reference

For restoration planning, the Allis-Chalmers C is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers C paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Galvanized, Orange 1 Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Allis Chalmers Cream Emblem Steering Wheel

    Allis Chalmers Cream Emblem Steering Wheel

    Allis-Chalmers
    $34.50
    A9901
    Allis Chalmers Cream Emblem Steering Wheel with die cast, chromed finish and cream painted background.Use this emblem on the steering wheel or front grille nose where applicable.Part Number:...
  • Allis-Chalmers Bullet Tail Light Trim Ring, black glossy metal ring with a small hole at the bottom for mounting, used as a decorative and protective part for vintage tractor tail lights.

    Bullet Tail Light Trim Ring

    Allis-Chalmers
    $11.75
    OL-071D
    Bullet Tail Light Trim Ring for select tractor tail lights.Verify fitment against your existing tail light before ordering.Part Number: OL-071DFitsAllis Chalmers: B, C, CA, G, WD, WD45International:...
  • Allis-Chalmers Red Glass Bullet Tail Light Lens Allis Chalmers International JD

    Red Glass Bullet Tail Light Lens

    Allis-Chalmers
    $17.75
    AC-123D
    Red Glass Bullet Tail Light Lens for select tractor applications.Use with bullet-style tail lights where listed.Part Number: AC-123DFitsAllis Chalmers: G, WD, WD45, B, C, CA, D10, D12 (up to sn...
  • Allis-Chalmers Axle Seal - AB-1628D

    Axle Seal for Allis-Chalmers and IH Farmall

    Allis-Chalmers
    $16.75
    AB-1628D
    Axle seal with dimensions of I.D. 1.187, O.D. 2.004, and width .250.Use the application notes below for inner axle seal, inner upper final drive shaft seal, differential carrier seal, and lower...
  • Allis-Chalmers Outer Upper Final Drive Shaft Oil Seal, automotive part for Allis-Chalmers equipment, round metal seal with a red outer edge and black inner ring.

    Outer Upper Final Drive Shaft Oil Seal for Allis-Chalmers

    Allis-Chalmers
    $22.75
    AC-1529D
    Outer upper final drive shaft oil seal for select Allis-Chalmers tractors.Sold individually, with 2 used per tractor in the listed applications.Part Number: AC-1529DFitsAllis-Chalmers BAllis-Chalmers...
  • Allis-Chalmers Thermostat 160 Degrees for Allis-Chalmers and More, gold-colored thermostatic valve with a conical top and circular base.

    Thermostat 160 Degrees for Allis-Chalmers and More

    Allis-Chalmers
    $39.75
    IH-913D
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter.Fits the listed tractor applications below.Part Number: IH-913DFitsAllis Chalmers: B (Engine SN: 126210 & up when equipped with...
  • Allis-Chalmers New Water Pump Allis Chalmers B IB C CA RC D10 D12 D14

    Allis-Chalmers Water Pump B C CA D10 D12 D14

    Allis-Chalmers
    $119.50
    AC-227D
    New water pump for Allis-Chalmers tractors. Fits B, IB, C, CA, RC, D10, D12, and D14.The pump has a 3/8" NPT bypass hole which can be plugged if needed.Part Number: AC-227DFitsAllis-Chalmers...
  • Allis-Chalmers Lower Water Pipe, Tube | Allis Chalmers B C CA RC

    Allis-Chalmers Lower Water Pipe Tube AC-192D

    Allis-Chalmers
    $39.75
    AC-192D
    Lower water pipe tube for Allis-Chalmers tractors. New part with 1-1/8" O.D. x 10" dimensions.Part Number: AC-192DFitsAllis-Chalmers BAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers RCReplaces /...
  • Allis-Chalmers 8-1/2" Clutch Kit, image showing clutch pressure plate, clutch disc, and release bearings for agricultural machinery repair.

    Allis-Chalmers 8-1/2" Clutch Kit

    Allis-Chalmers
    $439.00
    AC-346SD
    Clutch kit for Allis-Chalmers B, C, CA, and IB tractors. Diameter should be measured before ordering.Includes an 8-1/2" pressure plate, 8-1/2" 10 spline solid clutch disc, throw-out bearing, and...
  • Allis-Chalmers Radiator - Allis Chalmers B, IB, C, CA

    Allis Chalmers Pressurized Radiator for B, IB, C, CA

    Allis-Chalmers
    $399.00
    AC-128D
    Pressurized radiator for Allis Chalmers B, IB, C, and CA tractors. Must use AB-008D radiator cap only.Part Number: AC-128DFitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers...
  • Allis-Chalmers RADIATOR DRAIN PLUG | Hydraulic Drain Plug | Block Drain Plug

    Allis-Chalmers Radiator Drain Plug

    Allis-Chalmers
    $4.00
    AB-209D
    Radiator, hydraulic, and block drain plug with broad tractor fitment. Thread size is 1/4" - 18 NPT.Part Number: AB-209DFitsAllis Chalmers: IB, B, C, RC, CA, WC, WF, WD, WD45, D10, D12, D14, D15, D17,...
  • Allis-Chalmers Radiator Mounting Pad

    Radiator Mounting Pad for Allis-Chalmers and More

    Allis-Chalmers
    $4.00
    AB-455D
    Universal radiator mounting pad made from rubber and sized at 1 3/4" x 1 3/4" x 1/4" thick.Use on listed Allis-Chalmers models and other tractor applications below.Part Number: AB-455DFitsAllis...
  • Allis-Chalmers Fan Belt fits Allis Chalmers B IB C CA D10 D12 D14 70209656

    Allis-Chalmers Fan Belt B IB C CA D10 D12 D14 70209656

    Allis-Chalmers
    $15.75
    AB-009D
    Fan belt for Allis-Chalmers tractors with generators, including the listed B, IB, C, CA, D10, D12, and D14 applications.Cross-reference details and belt size are shown below.Part Number:...
  • Allis-Chalmers Fan Blade for WC, WD, WF, D17, WD45, black fan blade with four blades and central mounting hole for tractor cooling system.

    Allis Chalmers Fan Blade for WC, WD, WF, D17, WD45

    Allis-Chalmers
    $29.75
    AC-183D
    Replacement fan blade for Allis Chalmers WC, WD, WF, D17, and WD45 tractors. Fits gas and diesel applications as listed.Part Number: AC-183DFitsAllis Chalmers WCAllis Chalmers WDAllis Chalmers...
  • Allis-Chalmers 6 Volt Voltage Regulator for Allis-Chalmers, black rectangular electrical component with terminals for wiring connections.

    6 Volt Voltage Regulator for Allis-Chalmers

    Allis-Chalmers
    $42.75
    AB-153D
    6 volt external voltage regulator for selected tractors and generators. For positive ground systems with an A-type circuit and 7 to 9 amp output.Part Number: AB-153DFitsAllis Chalmers - B, C, CA, IB,...
  • Allis-Chalmers Voltage Regulator Conversion Kit for Allis-Chalmers, black electrical wiring with a grounding clip and a brown plastic component.

    Voltage Regulator Conversion Kit for Allis-Chalmers

    Allis-Chalmers
    $54.75
    AB-188D
    Voltage regulator conversion kit for selected tractors and generators. Use with AB-153D voltage regulator when replacing Delco Remy cutouts listed below.Part Number: AB-188DFitsAllis Chalmers - B, C,...
  • Allis-Chalmers Allis Chalmers B IB C CA D10 D12 D17 D19 Clutch Cover Plate, orange tractor clutch cover for vintage Allis Chalmers models.

    Allis Chalmers B IB C CA D10 D12 D17 D19 Clutch Cover Plate

    Allis-Chalmers
    $19.75
    AC-189D
    Clutch Inspection Cover Plate for Allis Chalmers tractors.Includes integral spring steel clips.Part Number: AC-189DFitsBIBCCAD10D12D17D19Replaces / Cross Reference70208465208465
  • Allis-Chalmers Clutch Pedal Return Spring B C CA IB, metal coil spring with hooks on both ends for clutch pedal mechanism.

    Allis-Chalmers Clutch Pedal Return Spring B C CA IB

    Allis-Chalmers
    $15.75
    AC-270D
    Allis-Chalmers clutch pedal return spring for B, C, CA, and IB tractors.Built to match the listed fitment and measurements for a standard clutch pedal return spring replacement.Part Number:...