Same Day Shipping On 99% Of Orders

Allis Chalmers D12 Tractor Parts

Allis-Chalmers D12 Tractor Parts

About the Allis-Chalmers D12

Allis-Chalmers introduced the D12 in 1959 as part of the new D Series. It was a compact row-crop tractor with a four-cylinder gasoline engine, four-speed transmission, live hydraulics, and a 540-rpm PTO. A D12 High Clearance version was also offered for cultivation work where extra clearance mattered.

The D12 stayed in production through 1968 and went through Series I, Series II, and Series III updates during that run. Early and later tractors can therefore differ in engine parts, air-cleaner parts, electrical equipment, and other details, even when both are called a D12. The serial number is the best starting point when checking parts.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. The engine serial number is on the rear left-hand side of the engine block behind the carburetor.

The table below shows the beginning tractor serial number for each Model D12 year and series:

 

1959-1961
Model D12 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1961 - Series II 3,001
1962-1964
Model D12 year Beginning serial number
1962 - Series II 3,638
1963 - Series II 5,501
1964 - Series II 6,012
1964 - Series III 9,001
1965-1968
Model D12 year Beginning serial number
1965 - Series III 9,192
1966 - Series III 9,508
1967 - Series III 9,830
1968 - Series III 9,979

Total production: About 4,070 Model D12 tractors.

Allis-Chalmers D12 Paint Reference

For restoration planning, the Allis-Chalmers D12 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D12 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Lower Water Pipe for D10 D12 D14 D15, used water pipe with a bend and threaded connection, displayed on a beige background.

    Allis-Chalmers Lower Water Pipe for D10 D12 D14 D15 | AC-249D (Display)

    Allis-Chalmers
    $31.75
    512
    Lower water pipe for Allis-Chalmers D10, D12, D14, and D15. Fits gas and LP models. SKU AC-249D. Part Number: AC-249D Fits Allis-Chalmers D10 Allis-Chalmers D12 Allis-Chalmers D14 Allis-Chalmers...
  • Allis-Chalmers Snap Coupler Bell Hook Spring 70226514, used part displayed on a brown surface with a label below indicating it's for display.

    Allis-Chalmers Snap Coupler Bell Hook Spring 70226514 (Display)

    Allis-Chalmers
    $15.00
    667
    Allis-Chalmers snap coupler bell hook spring for the listed tractors with quick hitch system. Use the fitment information below to confirm application. Part Number: 70226514 Fits Allis-Chalmers...
  • A vintage Allis-Chalmers tachometer for farm tractors, model D10 D12, display gauge with various measurement scales, mounted on an orange bracket.

    Allis-Chalmers Tachometer D10 D12 (Display)

    Allis-Chalmers
    $111.50
    702
    Part Number: AC-311D Allis-Chalmers Tachometer This tachometer is for Allis-Chalmers D10 and D12 models up to SN 9000 with 4 speed transmission. It has an AC logo. Fits Allis-Chalmers: D10, D12 (Up...
  • A tachometer designed for Allis-Chalmers farm tractors, model for D10, D12, 9000 and up. It features a circular dial with a black and white face, orange needle, and a digital display at the bottom. The tachometer is mounted on an orange metal base with a handle for installation or handling.

    Allis-Chalmers Tachometer for D10, D12 9000 & Up (Display)

    Allis-Chalmers
    $118.50
    703
    Tachometer for Allis-Chalmers D10 and D12 tractors. Part Number: AC-311RT Fits D10 serial number 9000 & up D12 serial number 9000 & up Replaces / Cross...
  • Allis-Chalmers Thermostat 180 Degrees, display of a used thermostat part.

    Allis-Chalmers Thermostat 180 Degrees (Display)

    Allis-Chalmers
    $10.25
    509
    Thermostat 180 degrees for Allis-Chalmers D10, D12, WC, WD, and WF. Part Number: AB-1086D Fits Allis-Chalmers D10 Allis-Chalmers D12 Allis-Chalmers WC Allis-Chalmers WD Allis-Chalmers WF Avery...
  • Allis-Chalmers Upper Seat Spacer Pivot Bushing 70227915, display image of a blue cylindrical metal bushing with some rust and wear.

    Allis-Chalmers Upper Seat Spacer Pivot Bushing 70227915 (Display)

    Allis-Chalmers
    $11.00
    681
    Upper seat spacer, pivot for shock absorber for Allis-Chalmers tractors. Sold individually; 2 per tractor. Part Number:...
  • Allis-Chalmers Water Pump, display model with attached orange tag and gasket, on a beige surface

    Allis-Chalmers Water Pump (Display)

    Allis-Chalmers
    $95.50
    459
    New water pump for Allis-Chalmers tractors. Fits B, IB, C, CA, RC, D10, D12, and D14. The pump has a 3/8" NPT bypass hole which can be plugged if needed. Part Number: AC-227D Fits Allis-Chalmers...
  • Delco Distributor Terminal Insulator Assembly Square Style - AB-500D, used part displayed with a black insulator and metal terminal components on a brown surface.

    Delco Distributor Terminal Insulator Assembly Square Style - AB-500D (Display)

    Allis-Chalmers
    $12.00
    674
    Delco Distributor Terminal Insulator Assembly, Square Style Important: AB-500D is a square-style Delco distributor terminal insulator assembly. It is for Delco distributors only and will not fit IH...
  • Fuel Bail Assembly (Short Bowl), metal component with adjustable screw, used for fuel system maintenance or repair.

    Fuel Bail Assembly (Short Bowl) (Display)

    Allis-Chalmers
    $6.00
    501
    Fuel Bail Assembly (Short Bowl) for Allis-Chalmers and other listed tractor models. New part. Part Number: AB-563D Fits Allis Chalmers: B, IB, C, CA, D10, D12, D14, D15 Gas (up to sn 9001), D17 Gas...
  • Headlight Lens w/ Guide Name 4-3/4" (Display), transparent round car headlight lens with a textured surface for vehicle lighting.

    Headlight Lens w/ Guide Name 4-3/4" (Display)

    Allis-Chalmers
    $12.50
    568
    Part Number: IH-352D Headlight Lens w/ Guide Name This 4-3/4" headlight lens has a "GUIDE" marking near the bottom of the lens and a dimpled outer surface. It is interchangeable with the original...
  • Headlight Reflector for Allis-Chalmers and Other Models, shiny chrome round reflector with mounting hole, displayed on a brown background.

    Headlight Reflector for Allis-Chalmers and Other Models (Display)

    Allis-Chalmers
    $11.75
    569
    Part Number: AB-320D Fits Allis Chalmers - B, C, CA, D10, D12, D14, D15 (up to sn 9001), RC, WC, WD, WD45, WF Case - VA, VAC, VAH (all up to sn 5400000) Cockshutt - 20, 30, 40, 50, 540, 550, 560,...
  • Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21, metallic hood latch snap fitting on brown background

    Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21 (Display)

    Allis-Chalmers
    $9.50
    650
    Part Number: CH4000 Hood Latch Snap Latch Hood latch snap latch for select Allis Chalmers tractors, bale throwers, balers, and some Gleaner combines. Strike not included. Fits ALLIS CHALMERS - D10,...
  • Left Side Hood Latch Bracket Allis Chalmers D10 D12, display image of a small gray metal bracket with two holes and a label D1012L on a cardboard background.

    Left Side Hood Latch Bracket Allis Chalmers D10 D12 (Display)

    Allis-Chalmers
    $14.50
    671
    Left side hood latch bracket for Allis Chalmers D10 and D12 tractors. Bolts to the side of the radiator housing. Sold individually. Part Number: D10D12L Fits Allis Chalmers D10 Allis Chalmers...
  • Light Ring 4-3/4" (Display), black circular light ring used for display lighting or photography.

    Light Ring 4-3/4" (Display)

    Allis-Chalmers
    $12.50
    567
    Interchangeable with original. Part Number: IH-353BD Fits Allis-Chalmers B, IB, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45 Avery Case VA, VAC, VAH (All up to sn 5400000) Cockshutt CO-OP...
  • Light Visor for Allis-Chalmers D10 D12 D15 D17 D19, red curved tractor part for display or repair.

    Light Visor for Allis-Chalmers D10 D12 D15 D17 D19 (Display)

    Allis-Chalmers
    $15.75
    575
    Light visor MF-108D for select Allis-Chalmers, Massey Ferguson, and Massey Harris applications. New condition. Part Number: MF-108D Fits Allis Chalmers: D10 (SN: 9001 & up), D12 (SN: 9001 & up), D15...
  • Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose, display of a vintage metal emblem with orange and silver colors, featuring large letters A-C and the words Allis-Chalmers.

    Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose (Display)

    Allis-Chalmers
    $27.25
    528
    Persian Orange #1 Emblem for Allis-Chalmers steering wheel and front nose applications. Die cast, chromed, painted Persian #1 background. Part Number: A9900 Fits Allis Chalmers - ED40, D10, D12,...
  • Right Hand Side Hood Latch Bracket for Allis Chalmers D10 D12, display image showing used part with label and barcode on a plain background.

    Right Hand Side Hood Latch Bracket Allis Chalmers D10 D12 (Display)

    Allis-Chalmers
    $14.50
    670
    Right hand side hood latch bracket for Allis Chalmers D10 and D12 tractors. Bolts to the side of the radiator housing. Sold individually. Part Number: D10D12R Fits Allis Chalmers D10 Allis Chalmers...
  • Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson, display showing a metallic bolt with a hexagonal head, screw threads, and a tapered end.

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson (Display)

    Allis-Chalmers
    $7.00
    662
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini. Use with parallel or 90 degree...