Same Day Shipping On 99% Of Orders

Allis Chalmers D15 Tractor Parts

About the Allis-Chalmers D15

The D15 replaced the D14 in 1960 and carried the compact D Series design into the 1960s. Early D15 tractors used a four-cylinder engine available in gasoline, LP gas, or diesel versions, with more power and an eight-speed transmission option.

There are two main versions to keep in mind: Series I was built from 1960 through 1962, and Series II from 1963 through 1968. Series II tractors received larger gas and LP engines, a dry air cleaner, headlights moved to the rear fenders, and updated hood decals. These changes are why the model year and serial number should be checked before ordering a D15 part.

Serial Number Reference

Serial number locations: On Series I tractors, the tractor serial number is stamped at the left front end of the torque housing. The gasoline engine serial number is on the rear left-hand side behind the carburetor, and the diesel engine serial number is on the top left-hand side of the engine block. On Series II tractors, the tractor serial number is stamped into the flange where the engine and transmission meet on the left side; gasoline engine numbers are at the rear left-hand side near the carburetor, and diesel numbers are on the top left-hand side of the cylinder block.

The table below shows the beginning tractor serial number for each Model D15 year and series:

 

1960-1962
Model D15 year Beginning serial number
1960 - Series I 1,001
1961 - Series I 1,900
1962 - Series I 6,470
1963-1965
Model D15 year Beginning serial number
1963 - Series II 13,001
1964 - Series II 16,928
1965 - Series II 19,681
1966-1968
Model D15 year Beginning serial number
1966 - Series II 21,375
1967 - Series II 23,734
1968 - Series II 25,127

Total production: 7,169 Model D15 tractors: 6,212 gas/LP and 957 diesel.

Allis-Chalmers D15 Paint Reference

For restoration planning, the Allis-Chalmers D15 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D15 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Tail Light Gasket | Allis Chalmers D14 D15 D17

    Allis Chalmers D14 D15 D17 Tail Light Gasket

    Allis-Chalmers
    $4.75
    AC-245D
    Tail light gasket for listed Allis Chalmers, AC, and John Deere applications.Part Number: AC-245DFitsAllis Chalmers: D14 (SN: 19001 & up), D15, D17AC Combines: A2, C, EAC Lawn & Garden: 116, 122,...
    Add to Cart
  • Black metal hood latch for Allis-Chalmers D-series farm tractors, shown against a white background.

    Allis Chalmers D10 D12 D14 D15 D17 D19 D21 Hood Latch

    Allis-Chalmers
    $12.00
    CH4009
    Part Number: CH4009Allis Chalmers Hood LatchLoop-style snap hood latch for the Allis Chalmers tractors and Gleaner combines listed below.FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers...
    Add to Cart
  • Close-up of a round Allis-Chalmers tractor ammeter with a silver bezel and white face, labeled AMPERES and marked from 60 discharge through 0 to 60 charge. The needle points to zero.

    Allis Chalmers Amp Gauge (60-0-60) 12 Volt

    Allis-Chalmers
    $29.75
    AC-1833D
    12 volt Allis Chalmers amp gauge with a 60-0-60 scale and the Allis Chalmers logo.Part Number: AC-1833DFitsAllis Chalmers - Various (Any tractors that have been converted to 12 volt system)Specs12...
    Add to Cart
  • A close-up image of a gold-colored metal stop and bolt designed for Allis-Chalmers farm tractors. The stop has a rectangular, hollowed-out section, and the bolt has a threaded shaft with a hexagonal head.

    Rear Spinout Rim Stop & Bolt for Allis-Chalmers and More

    Allis-Chalmers
    $24.00
    70219456
    Rear spinout rim stop & hex bolt included for parallel drilled rim rails.New part sold under store SKU 70219456.Part Number: 70219456FitsAllis Chalmers - CA, D10, D12, D14, D15, D17, D19, WD, WD45,...
    Add to Cart
  • Orange metal toolbox with a hinged lid and front latch, for Allis-Chalmers WD, WD45, D10, D12, D14, and D17 farm tractors.

    Toolbox for Allis-Chalmers WD, WD45, D10, D12, D14, D15, D17

    Allis-Chalmers
    $55.75
    AC-090D
    Toolbox for Allis-Chalmers WD, WD45, D10, D12, D14, D15, and D17 models.Part Number: AC-090DFitsAllis Chalmers - WD, WD45, D10 (up to sn 9001), D12 (up to sn 9001), D14, D15, D17Replaces / Cross...
    Add to Cart
  • Allis-Chalmers Brake Riveting Rivet Tool

    Allis-Chalmers Brake Riveting Rivet Tool MI-1131D

    Allis-Chalmers
    $39.75
    MI-1131D
    OverviewBrake riveting rivet tool for Allis-Chalmers and other tractor applications. Use to rivet brake linings to an existing shoe or band. Includes tools for removing old rivets, drilling and...
    Add to Cart
  • A close-up image of a cylindrical metallic bushing, likely made of bronze or brass, used for Allis-Chalmers farm tractors. The surface shows a smooth, shiny finish.

    Allis-Chalmers Clutch Pedal Bushing D14 D15 D17 D19 D21 175 180 185

    Allis-Chalmers
    $13.00
    70235082
    Clutch pedal bushing for Allis-Chalmers tractors listed below.Part Number: 70235082FitsAllis-Chalmers D17Allis-Chalmers D19Allis-Chalmers 175Allis-Chalmers 180Allis-Chalmers 185Allis-Chalmers D14 (SN...
    Add to Cart
  • Allis-Chalmers 12 Volt Voltage Regulator, black rectangular electrical component with mounting brackets for Allis Chalmers D10, D12, D14, D15, D17, D19 tractor models, part number 70229484.

    12 Volt Voltage Regulator for Allis Chalmers D10, D12, D14, D15, D17, D19

    Allis-Chalmers
    $34.75
    AB-185D
    12 volt voltage regulator. Fits listed Allis-Chalmers D10 through D19 applications. Condition: New.Part Number: AB-185DFitsAllis Chalmers - D10, D12 (SN: 3501 & up), D14 (SN: 19001 & up), D15 (Gas),...
    Add to Cart
  • Allis-Chalmers Ignition Key Allis Chalmers Oliver Case 72162639

    Ignition Key for Allis-Chalmers, Oliver, Case 72162639

    Allis-Chalmers
    $5.25
    KY-01D
    Ignition key with brass finish for listed Allis-Chalmers, Oliver, Case, Cockshutt, IH, Farmall, and White models.Fits listed models using Delco switch.Part Number: KY-01DFitsAllis Chalmers: D10, D12,...
    Add to Cart
  • Allis-Chalmers 63 Amp One Wire Alternator with Pulley - Used for converting 6 volt to 12 volt - AB-418D

    63 Amp One Wire Alternator with Pulley for 6V to 12V Conversion

    Allis-Chalmers
    $129.75
    AB-418D
    63 amp one wire alternator with pulley, used for converting 6 volt to 12 volt systems.Built-in regulator and 1 wire hook up for 12 volt negative ground systems.Part Number: AB-418DFitsAllis Chalmers:...
    Add to Cart
  • Two gray circular brake linings with center openings and a pile of brass rivets for Allis-Chalmers D15, D17, 170, 175, 180, and 185 farm tractor disk brakes.

    Allis Chalmers Brake Lining Kit For Disk Brakes D15 D17 170 175 180 185

    Allis-Chalmers
    $39.75
    ACR2835
    Brake lining kit for disk brakes on listed Allis Chalmers models.Part Number: ACR2835FitsAllis Chalmers - D15, D17, 170, 175, 180, 185Replaces / Cross Reference70276914, 70237421, 237421,...
    Add to Cart
  • Allis-Chalmers Valve Cover Gasket for D10, D12, D14, D15, image of a brown gasket with four small circular holes

    Allis Chalmers Valve Cover Gasket for D10, D12, D14, D15

    Allis-Chalmers
    $18.75
    AC-1187D
    Allis Chalmers Valve Cover Gasket for D10, D12, D14, D15, I40, I60, I400, and I600 gas/LP models with G138, G149, and G160 engines.Part Number: AC-1187DFitsAllis Chalmers D10Allis Chalmers D12Allis...
    Add to Cart
  • Allis-Chalmers tractor fuel gauge, part number 70227865, with a silver face, orange four-hole mounting flange, and markings for E, 1/4, 1/2, 3/4, and F.

    Allis Chalmers Fuel Gauge 70227865

    Allis-Chalmers
    $82.75
    AC-2640D
    Allis Chalmers fuel gauge for D10, D12, D14, D15, ED40, H3, HD3, I40, I400, I60, and I600 gas and diesel models.Complete with gasket and 4 screws. Gauge face is the same as original.Part Number:...
    Add to Cart
  • Baldwin Oil Filter, Hydraulic Filter, Cartridge (Spin On) Allis Chalmers D15 D17 170 175 D10 D12 D19

    Baldwin Spin-On Oil & Hydraulic Filter for Allis-Chalmers

    Baldwin
    $12.00
    AB-007D
    Spin-on oil and hydraulic filter for listed Allis-Chalmers applications.Also used on selected Case, Ford, and Oliver models listed below.Part Number: AB-007DFitsAllis Chalmers Engine Oil Filter: D15...
    Add to Cart
  • Allis-Chalmers REAR SPINOUT RIM STOP Allis Chalmers Ford Case Massey Ferguson JD

    REAR SPINOUT RIM STOP for Allis-Chalmers, Ford, Case, Massey Ferguson, JD

    Allis-Chalmers
    $17.00
    MI-109D
    Rear spinout rim stop for parallel drilled rim rails. For spin out rims using 6 sided stops. Fits all of our spin out rims we sell.Part Number: MI-109DFitsAllis Chalmers: variousCase:...
    Add to Cart
  • Allis-Chalmers farm tractor cap screw bolt and rectangular block, part 70202132. The long threaded screw has a slotted head and tapered end; the flat block has a central hole.

    Allis-Chalmers Cap Screw Bolt & Block 70202132

    Allis-Chalmers
    $13.75
    70202132 (009)
    Cap screw, bolt, and block for fuel tank and radiator straps. Sold individually and supplied as 1 screw and 1 mounting block.Part Number: 70202132 (009)FitsAllis Chalmers - D10, D12, D14, D15, D17,...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Seat Bumper 70229703 229703

    Allis Chalmers Seat Bumper 70229703 229703

    Allis-Chalmers
    $15.75
    AC-1891D
    Seat bumper for select Allis Chalmers tractors and industrial models with standard pan style seat. Replaces 70229703 and includes the referenced bumper number 229703.Part Number: AC-1891DFitsD10 SN...
    Add to Cart
  • Black Allis-Chalmers control lever knob, part numbers 70233770 and 233770, shown diagonally on a white background. It has a long, slightly tapered cylindrical shape with a rounded end.

    Allis-Chalmers Control Lever Knob 70233770 233770

    Allis-Chalmers
    $18.75
    70233770
    Allis-Chalmers control lever knob for select tractors and industrial models. New rubber knob with 1" x 4" dimensions and a 0.445" hole ID.Part Number: 70233770FitsAllis-Chalmers D10, D12, D14, D15,...
    Add to Cart