Same Day Shipping On 99% Of Orders

Allis Chalmers D19 Tractor Parts

About the Allis-Chalmers D19

The D19 joined the D Series in 1961 as a larger row-crop tractor with an 85-horsepower six-cylinder engine. It was offered with gasoline, LP-gas, or diesel power and an eight-speed transmission for heavier field work.

Built through 1964, the D19 was one of the largest tractors in the original D Series lineup. The 190 followed it in the Allis-Chalmers tractor line.

Serial Number Reference

Serial number locations: The tractor serial number is on the machined surface at the top rear of the transmission housing, below the seat. The engine serial number is on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D19 year:

 

1961-1962
Model D19 year Beginning serial number
1961 1,001
1962 1,250
1963-1963
Model D19 year Beginning serial number
1963 12,001
1964-1964
Model D19 year Beginning serial number
1964 14,945

Total production: 10,591 Model D19 tractors.

Allis-Chalmers D19 Paint Reference

For restoration planning, the Allis-Chalmers D19 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D19 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Allis Chalmers OEM Temperature Gauge 231378 - D15, D17, D19 - 70231378

    Temperature Gauge for Allis-Chalmers D15, D17, D19

    Allis-Chalmers
    $209.00
    70231378
    Temperature gauge for Allis-Chalmers D15 gas, D17, and D19 gas tractors.Replacement numbers include 70231378 and 231378.Part Number: 70231378FitsAllis-Chalmers D15 GasAllis-Chalmers D17Allis-Chalmers...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Front Spindle Snap Ring 227827 70227827

    Allis Chalmers Front Spindle Snap Ring

    Allis-Chalmers
    $8.50
    70227827
    Allis Chalmers front spindle snap ring for select tractors and Gleaner combines.Part Number: 70227827FitsAllis Chalmers D14Allis Chalmers D15Allis Chalmers D17Allis Chalmers D19Allis Chalmers...
    Add to Cart
  • Allis-Chalmers 2" Sediment Bowl Gasket (NBR) - 70208362

    2" Sediment Bowl Gasket (NBR)

    Allis-Chalmers
    $1.70
    70208362
    2" sediment bowl gasket made from nitrile butadiene rubber (NBR).Part Number: 70208362FitsAllis Chalmers - B, C, CA, G, D10, D12, D14, D15 (Gas To Sn# 9000), D17 (Gas To Sn# 42000), I40, I400, I60,...
    Add to Cart
  • Allis-Chalmers Universal 2 Position Push Pull - Ignition - Light Switch - SSW2809

    Universal 2 Position Push Pull Ignition Light Switch

    Allis-Chalmers
    $7.50
    SSW2809
    Universal 2 position push/pull switch for ignition or light use. It is non-fused and includes a plastic knob. Part Number: SSW2809 Fits Allis Chalmers - Various Case - Various Cockshutt -...
    Add to Cart
  • AGCO OEM Allis Chalmers Amp Gauge (60-0-60) - D10-D21, 170-220 - 70254407

    OEM Allis Chalmers Ammeter Gauge 60-0-60

    AGCO
    $44.50
    70254407
    OEM AGCO ammeter gauge marked Amperes 60-0-60 for listed Allis Chalmers tractors and power units.Part Number: 70254407FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis...
    Add to Cart
  • Allis-Chalmers Tractor Parts Catalog 2025, vintage farm tractor parts catalog cover with sunset landscape background.

    Allis Chalmers Tractor Parts Catalog

    Allis-Chalmers
    $0.00
    0000
    The Allis Chalmers Tractor Parts Catalog (2025) is a comprehensive parts guide for Allis Chalmers tractors. It is available as a hard copy and as a printable PDF catalog. Part Number: 0000 Current...
    Add to Cart
  • Allis-Chalmers Steering Shaft Cross and Bearing (U-Joint) - AB-2507D

    Steering Shaft Cross and Bearing U-Joint for Allis-Chalmers

    Allis-Chalmers
    $17.75
    AB-2507D
    Allis Chalmers - D14, D15, D17, D19, RC, WC, WF (when using later style steering joint # 224825), WD, WD45 (dsl); Replacement for: 70224890, 224890 Case - 200B, 210B, 211B, 300B, 301B, 302B, 310B,...
    Add to Cart
  • Hydraulic Filter Allis Chalmers D15 D17 D19 D21 180 185 190 190XT 70239930

    Hydraulic Filter for Allis-Chalmers D15 D17 D19 D21 180 185 190 190XT

    Baldwin
    $16.00
    70239930
    Hydraulic Filter for Allis-Chalmers D15, D17, D19, D21, 180, 185, 190, and 190XT.Also fits the 860 Cotton Stripper (1978) with diesel engine (590577-4302 - 9999), 82 SH Side Mounted Mower, and I40 /...
    Add to Cart
  • Allis-Chalmers Oil Seal, Engine Flywheel - Allis Chalmers WD45 Dsl, D15 Dsl, D17 Dsl, D19 - 74502930

    Allis-Chalmers WD45 Diesel, D15 Diesel, D17 Diesel, D19 Oil Seal

    Allis-Chalmers
    $30.00
    74502930
    Engine flywheel oil seal for the listed Allis-Chalmers models.Part Number: 74502930FitsAllis-Chalmers WD45 DieselAllis-Chalmers D15 DieselAllis-Chalmers D17 DieselAllis-Chalmers D19 GasAllis-Chalmers...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Metal Seat Pan - D10 D12 D14 D15 D17 D19 D21 170 175 180 185 190 190XT 210 220

    Allis Chalmers Metal Seat Pan for D10, D12, D14, D15, D17, D19, D21

    Allis-Chalmers
    $188.00
    KM7539
    Allis Chalmers metal seat pan for select tractor models. Made in the USA with a steel frame and restoration-quality construction.Part Number: KM7539FitsD10D12D14D15D17D19D21Also fits 170, 175, 180,...
    Add to Cart
  • Allis-Chalmers Gas Tank Sealer - 1 Quart Can - ACR2043, a silver can with a blue and white label featuring the product name and warning notice.

    Gas Tank Sealer - 1 Quart Can

    Allis-Chalmers
    $69.99
    ACR2043
    Gas tank sealer in a 1 quart can.Part Number: ACR2043FitsAllis-Chalmers - VariousCase - VariousCockshutt - VariousFord - VariousInternational - VariousJohn Deere - VariousMassey Ferguson -...
    Add to Cart
  • Allis-Chalmers D Series 3-3/8 Inch Nickel Plated Hole Plug 71995k86, image showing a metal hole plug with a screw and a mounting bracket.

    Allis Chalmers D Series 3-3/8 Inch Nickel Plated Hole Plug 71995k86

    Allis-Chalmers
    $12.00
    71995k86
    Nickel plated 3-3/8 inch snap-in hole plug for Allis Chalmers D Series tractors.Part Number: 71995k86FitsAllis Chalmers D Series TractorsSpecs3-3/8 inchNotesTachometer gauge hole.
    Add to Cart
  • Allis-Chalmers 2 inch Snap-In Hole Plug, Nickel Plated, with one side showing the plug's detailed edge and the other side showing a smooth, metallic surface.

    Allis Chalmers 2" Snap-In Hole Plug, Nickel Plated

    Allis-Chalmers
    $3.00
    9563K54
    Allis Chalmers D Series tractors 2 inch snap-in hole plug in nickel plated finish.Use this plug to cover oil, amp meter, temperature, and traction booster gauge holes.Part Number: 9563K54FitsD Series...
    Add to Cart
  • Allis-Chalmers 7/8 inch Snap-In Hole Plug, Nickel Plated, 9563K46, image showing front and back views of the nickel-plated metal hole plug with a serrated interior for secure fit.

    Allis-Chalmers 7/8" Snap-In Hole Plug, Nickel Plated - 9563K46

    Allis-Chalmers
    $1.50
    9563K46
    OverviewNickel plated 7/8" snap-in hole plug for Allis-Chalmers D Series tractors and cigarette lighter openings. Part Number: 9563K46.FitsAllis-Chalmers D Series tractorsCigarette lighter...
    Add to Cart
  • Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47, two metallic gold-colored hole plugs with a smooth and textured surface, one with a snap-in design and the other plain.

    Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47

    Allis-Chalmers
    $1.50
    9563K47
    Nickel-plated 1" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for key ignition switch use.Part Number: 9563K47FitsAllis-Chalmers D Series TractorsSpecsSize: 1 inchNotesKey ignition...
    Add to Cart
  • Allis-Chalmers 11/16 inch Snap-In Hole Plug Nickel Plated Allis Chalmers D Series, product image showing the plug's internal and external views.

    11/16" Snap-In Hole Plug Nickel Plated Allis Chalmers D Series

    Allis-Chalmers
    $1.25
    9563K61
    11/16 inch snap-in hole plug for Allis Chalmers D Series tractors. Nickel plated and described for push button start, fuse holder, and dash light use.Part Number: 9563K61FitsAllis Chalmers D Series...
    Add to Cart
  • Allis-Chalmers D Series 7/16 inch Snap-In Hole Plug 9563K84, metal hole plug with snap-in design for machinery maintenance and repair.

    Allis-Chalmers D Series 7/16" Snap-In Hole Plug 9563K84

    Allis-Chalmers
    $1.00
    9563K84
    Nickel-plated 7/16" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for headlight switch use.Part Number: 9563K84FitsAllis-Chalmers D Series TractorsSpecsSize: 7/16 inchNotesHeadlight...
    Add to Cart
  • Allis-Chalmers 1/2 inch Snap-In Hole Plug, Nickel Plated, with one view showing the plug's interior and the other showing the smooth exterior surface.

    Allis-Chalmers 1/2" Snap-In Hole Plug, Nickel Plated

    Allis-Chalmers
    $1.00
    9563K43
    Part Number: 9563K43Product Overview1/2 inch snap-in hole plug with a nickel plated finish for Allis-Chalmers D Series tractors. Intended for belt pulley rod or knob holes.FitsAllis-Chalmers D Series...
    Add to Cart