Same Day Shipping On 99% Of Orders

Allis Chalmers D19 Tractor Parts

About the Allis-Chalmers D19

The D19 joined the D Series in 1961 as a larger row-crop tractor with an 85-horsepower six-cylinder engine. It was offered with gasoline, LP-gas, or diesel power and an eight-speed transmission for heavier field work.

Built through 1964, the D19 was one of the largest tractors in the original D Series lineup. The 190 followed it in the Allis-Chalmers tractor line.

Serial Number Reference

Serial number locations: The tractor serial number is on the machined surface at the top rear of the transmission housing, below the seat. The engine serial number is on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D19 year:

 

1961-1962
Model D19 year Beginning serial number
1961 1,001
1962 1,250
1963-1963
Model D19 year Beginning serial number
1963 12,001
1964-1964
Model D19 year Beginning serial number
1964 14,945

Total production: 10,591 Model D19 tractors.

Allis-Chalmers D19 Paint Reference

For restoration planning, the Allis-Chalmers D19 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D19 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • A metal seat frame lower linkage assembly for Allis-Chalmers D-Series farm tractors, silver in color and elongated with two holes at one end and a cylindrical attachment point at the other.

    Allis Chalmers D-Series Seat Frame Lower Linkage Assembly

    Allis-Chalmers
    $119.50
    70233327
    Allis Chalmers D-Series Seat Frame Lower Linkage Assembly for D10-220 models.Part Number: 70233327FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis Chalmers D17Allis...
    Add to Cart
  • A universal 2-position push-pull switch designed for Allis-Chalmers farm tractors, not for automobiles.

    Universal 2 Position Push Pull Switch

    Allis-Chalmers
    $13.50
    DJS398
    Universal 2 position push pull switch for agricultural and light industrial equipment. For ignition switch applications, it can be used only on battery ignition systems.Switch is a 10amp switch with...
    Add to Cart
  • Cover of the Allis-Chalmers D19 Operators Manual, featuring an orange and yellow design with a schematic drawing at the top and the title indicating it is an operators manual for a farm tractor.

    Allis Chalmers D19 Operators Manual

    Allis-Chalmers
    $37.00
    MAND19OP
    Allis-Chalmers - D19The operator's manual, also referred to as the owner's manual, originally came with the equipment. It provides owner-operator instructions, shift patterns, capacities such as...
    Add to Cart
  • A metallic flexible choke cable with a round black knob at one end, labeled 'CHOKE,' designed for Allis-Chalmers farm tractors.

    Universal Choke Cable 64"

    Allis-Chalmers
    $19.75
    AC-17033019
    Universal Choke Cable with 64" metal sheathed cable length.Part Number: AC-17033019FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousIH / Farmall - Hydro 70, Hydro 86, 300,...
    Add to Cart
  • Two brass fuel line adapter fittings with threaded ends, designed for Allis-Chalmers farm tractors, not made for automobiles.

    Fuel Line Adapter Fitting

    Allis-Chalmers
    $5.00
    AB-4285D
    Fuel Line Adapter Fitting for tractors and equipment using 5/16" fuel line.Part Number: AB-4285DFitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsInternational :...
    Add to Cart
  • A brown gasket with multiple holes, designed for Allis-Chalmers farm tractors' transmission gear shift top plate, identified by the part number 70239367.

    Allis Chalmers Transmission Gear Shift Top Plate Gasket 70239367

    Allis-Chalmers
    $7.75
    70239367
    Transmission Gear Shift Top Plate Gasket for Allis Chalmers tractors.Part Number: 70239367FitsAllis Chalmers - D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 220 FWAReplaces / Cross...
    Add to Cart
  • A chrome push button starter switch for Allis-Chalmers farm tractors. The switch has a metallic body with threading and a button on the end, designed for specific tractor models like WD45, D15, D17, D19, D21, and various series such as 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6000, and 7000.

    Chrome Push Button Starter Switch for Allis Chalmers WD45 Diesel D15 D17 D19 D21 170 175 180 185 190 190XT 190XT III 200 210 220 6000 Series 7000 Series

    Allis-Chalmers
    $16.25
    DJS60824
    Chrome push button starter switch for the listed Allis Chalmers tractors and series.Features 5/8" mounting threads.Part Number: DJS60824FitsAllis Chalmers WD45 DieselAllis Chalmers D15Allis Chalmers...
    Add to Cart
  • A metal bracket designed for Allis-Chalmers D17 farm tractor, used as a work light or taillight bracket, with a curved shape and a slot for mounting.

    Allis Chalmers Work Light / Taillight Bracket for D17

    Allis-Chalmers
    $75.00
    DJS1211
    Part Number: DJS1211 Allis Chalmers Work Light / Taillight Bracket Bracket for the Allis Chalmers D17 Series I, II, and III. It can also be added to any D Series seat frame for use with Combo Light...
    Add to Cart
  • A battery retainer and hold down bracket designed for Allis Chalmers farm tractors, specifically compatible with D17 and D19 models. The set includes two metal hooks, two washers, and the main bracket frame.

    Battery Retainer / Battery Hold Down Bracket for Allis Chalmers D17 D19

    Allis-Chalmers
    $48.75
    70232919
    Battery retainer / battery hold down bracket for Allis Chalmers D17 and D19.Includes "J" bolts and is made in the USA.Part Number: 70232919FitsAllis Chalmers D17Allis Chalmers D19Replaces / Cross...
    Add to Cart
  • Allis-Chalmers PTO Guard for various Allis-Chalmers farm tractor models, shown as a metal guard with mounting holes.

    PTO Guard for Allis-Chalmers D17 D19 170 175 180 185 190 190XT 200 210 7000

    Allis-Chalmers
    $109.25
    70255996
    PTO Shield / Guard for Allis-Chalmers tractors. New part.Part Number: 70255996FitsAllis Chalmers - D17 (Series IV), D19, 170, 175, 180, 185, 190, 190XT, 200, 210, D21, 220, 7000Replaces / Cross...
    Add to Cart
  • A metal battery tray designed for Allis-Chalmers D19 farm tractor, model number 70236715. The tray is rectangular with raised sides, mounting brackets on the sides, and a vertical support in the center for securing the battery.

    Allis-Chalmers D19 Battery Tray 70236715

    Allis-Chalmers
    $192.50
    70236715
    Part Number: 70236715Allis-Chalmers D19 Battery TrayReproduction battery tray for the listed D19 applications. Made in the USA.FitsD19 Gas & LP onlyReplaces / Cross...
    Add to Cart
  • A large, round gear with evenly spaced teeth around its circumference, intended for use with Allis-Chalmers farm tractors, specifically D17 Diesel, D19 Diesel & LP models.

    Allis Chalmers D17 Diesel, D19 Diesel & LP Flywheel Ring Gear

    Allis-Chalmers
    $90.50
    74508877V
    Part Number: 74508877VAllis Chalmers Flywheel Ring GearThis flywheel ring gear is for listed Allis Chalmers diesel and LP tractors. Please confirm your part number and model before ordering.FitsD17...
    Add to Cart
  • An Allis-Chalmers universal 12V LED fender and cab warning light in amber and red colors, designed for farm tractors, with wiring attached for connection.

    Universal 12V LED Fender & Cab Warning Light Amber / Red

    Allis-Chalmers
    $59.75
    AB-3538D
    Universal 12V LED fender and cab warning light with amber and red diodes.Includes mounting stud with nut and washers.Part Number: AB-3538DFitsAllis-Chalmers - various modelsCase - various...
    Add to Cart
  • A round fuel gauge with a silver face and black markings, mounted in an orange square frame with four bolt holes. The gauge displays fuel levels from E (empty) to F (full), with intermediate markings at 1/4, 1/2, and 3/4. The needle points to slightly below 1/2, and the face includes the text 'ALLIS-CHALMERS' and 'FUEL'.

    Allis Chalmers D19 Fuel Gauge 70236626

    Allis-Chalmers
    $97.75
    70236626
    Fuel gauge for Allis Chalmers D19 tractors.Fits D19 gas and diesel models.Complete with gasket and screws.Part Number: 70236626Replaces / Cross Reference70236626236626FitsAllis Chalmers D19 (Gas and...
    Out of stock
  • A set of eight metallic screw hardware pieces arranged in two rows, designed for Allis-Chalmers D series farm tractors.

    Allis Chalmers D10, D12, D14, D15, D17, D19, D21 Seat Screw Hardware Kit

    Allis-Chalmers
    $4.75
    70916081
    Allis Chalmers D10, D12, D14, D15, D17, D19, D21Seat Screw Hardware KitPart Number: 70916081FitsD10D12D14D15D17D19D21Replaces / Cross Reference70916081Specs8 piece set of seat cushion screws1/4-
    Add to Cart
  • A gasket designed for the water pump to cylinder block connection in Allis-Chalmers D17 Diesel and D19 tractor engines. It is black, flat, with four holes for mounting, and a large central hole for the water passage.

    Water Pump to Cylinder Block Gasket for Allis-Chalmers D17 Diesel, D19

    Allis-Chalmers
    $6.75
    74512212
    Water pump to cylinder block gasket for select Allis-Chalmers tractors.Part Number: 74512212FitsD17 DieselD19 (Gas, LP, Diesel)Replaces / Cross Reference7451221270277032Ordering NotesMatch the gasket...
    Add to Cart
  • A metal rim clamp with a bolt, designed for Allis-Chalmers farm tractors, not for automobiles. It is labeled as a Bridle 1 Bolt Spin-out Rim Clamp.

    Bridle 1 Bolt Spin-out Rim Clamp

    Allis-Chalmers
    $18.75
    AB-3865D
    Bridle 1 bolt spin-out rim clamp for the listed tractor applications using 1 bolt spin-out rim clamps.Part Number: AB-3865DFitsAllis Chalmers - D17 (SN 42001 & up), D19, 160, 170, 175, 180, 185, 190,...
    Add to Cart
  • A brass oil gauge adapter or filter base adapter with threaded ends, designed for Allis-Chalmers farm tractors.

    Oil Gauge Adapter / Filter Base Adapter

    Allis-Chalmers
    $10.50
    5220K61
    Oil gauge adapter / filter base adapter for models using a 1/8" oil line.Part Number: 5220K61FitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsFord - various modelsIH...
    Add to Cart