Same Day Shipping On 99% Of Orders

Allis Chalmers G Tractor Parts

About the Allis-Chalmers G

The Allis-Chalmers G was built for small farms, gardens, and vegetable growers, but it looked unlike a conventional tractor. Its Continental four-cylinder engine sat at the rear, leaving the front open for a clear view of mounted tools.

Built in Gadsden, Alabama, from 1948 through 1955, the G was a tool carrier rather than a general-purpose row-crop tractor. Allis-Chalmers offered a line of implements that mounted under the tractor, making the small machine especially useful for cultivating and other close-in work.

Serial Number Reference

Serial number locations: The tractor serial number is stamped next to the starter on the engine. The engine serial number is on the starter side of the engine near the starter.

The table below shows the beginning tractor serial number for each Model G year:

 

1948-1950
Model G year Beginning serial number
1948 6
1949 10,961
1950 23,180
1951-1953
Model G year Beginning serial number
1951 24,006
1952 25,269
1953 26,497
1954-1955
Model G year Beginning serial number
1954 28,036
1955 29,036

Total production: 29,976 Model G tractors.

Allis-Chalmers G Paint Reference

For restoration planning, the Allis-Chalmers G is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers G paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Silver Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers G Cultivator Shields, Set of 2, gray metal shields with multiple holes for attachment, designed for use with Allis-Chalmers G series cultivators.

    Allis-Chalmers G Cultivator Shields, Set of 2

    Allis-Chalmers
    $56.00
    KI1201
    Allis Chalmers G implement cultivator shields, sold as a set of 2.Made to OE specifications with a 27" length and 8" height.Part Number: KI1201FitsAllis Chalmers GSpecsLength: 27"Height: 8"Quantity:...
    Add to Cart
  • Allis-Chalmers Starter Drive (Bendix) for Allis Chalmers D10 D12 D14 WC WD WD45, metal gear component for tractor starting system.

    Starter Drive (Bendix) for Allis Chalmers D10 D12 D14 WC WD WD45

    Allis-Chalmers
    $55.75
    IH-132D
    WARNING! Spinning the starter Bendix before installation will void warranty. No exchange will be given, including spinning by hand.Starter drive (Bendix) for the listed Allis Chalmers applications...
    Add to Cart
  • Allis-Chalmers G Instrument Panel Primered, metal frame part for tractor dashboard

    Allis-Chalmers G Instrument Panel Primered

    Allis-Chalmers
    $54.99
    AC-338D
    Primered instrument panel for Allis-Chalmers G tractors. This replacement panel is supplied primered for final prep and paint.Part Number: AC-338DFitsAllis Chalmers GReplaces / Cross...
    Add to Cart
  • Allis-Chalmers Allis Chalmers G Tractor Steering Wheel

    Allis Chalmers G Tractor Steering Wheel

    Allis-Chalmers
    $54.75
    AC-129D
    Part Number: AC-129DTractor Steering WheelReplacement steering wheel for the Allis Chalmers G tractor. Steel spokes, just like original.FitsAllis Chalmers GReplaces / Cross...
    Add to Cart
  • Allis-Chalmers G Rear Axle Bearing - 70928929, a round mechanical bearing with orange rubber sealing rings on the outer edge.

    Allis-Chalmers G Rear Axle Bearing - 70928929

    Allis-Chalmers
    $54.75
    AC-1314D
    Rear axle bearing for Allis-Chalmers G tractors. Replacement for 70928929 with the listed metric dimensions below.Part Number: AC-1314DFitsAllis-Chalmers GReplaces / Cross ReferenceAdditional...
    Add to Cart
  • Allis-Chalmers Starter Drive Assembly (Bendix), a mechanical component for tractor models D14, WC, WD, WD45, G, D10, D12, featuring a metal gear and coil spring design for starting mechanisms.

    Starter Drive Assembly (Bendix) Allis Chalmers D14 WC WD WD45 G D10 D12

    Allis-Chalmers
    $49.95
    AB-458D
    Starter drive assembly (Bendix) for listed tractor applications.Part Number: AB-458DFitsAllis Chalmers - D14, WC, WD, WD45 (W/starter numbers: 1107017, 1107951, 1107474, 1107466, 1107962), G...
    Add to Cart
  • Allis-Chalmers VALVE GRIND HEAD GASKET SET Allis Chalmers G | Massey Harris Pony

    Allis Chalmers G and Massey Harris Pony Valve Grind Head Gasket Set

    Allis-Chalmers
    $49.75
    AC-025VGKD
    Valve Grind Head Gasket Set for Allis Chalmers G and Massey Harris Pony. Includes valve cover gasket, head gasket, and manifold gasket for N62 Continental engine.Part Number: AC-025VGKDFitsAllis...
    Add to Cart
  • A round, transparent precleaner kit for Allis-Chalmers farm tractors, featuring a black plastic lid, a transparent bowl with yellow diagram instructions, and a 3-inch base.

    Economy Precleaner Kit with Plastic Lid, Bowl, and 3" Base

    Allis-Chalmers
    $49.75
    DJS741
    Economy precleaner kit with plastic lid with nut, plastic bowl, and plastic 3" base. New part.Part Number: DJS741FitsAllis Chalmers Combines - F2 (Gas & Diesel), G, L, M (Gas), K2 (Diesel)Case 580D...
    Add to Cart
  • Six long dark steel manifold studs for Allis-Chalmers Late D17, 170, and 175 farm tractors, arranged upright on a white background; three brass nuts are fitted to the upper ends and three additional brass nuts sit near the bottom.

    Allis Chalmers Late D17 170 175 Manifold Stud Set w/ Brass Nuts

    Allis-Chalmers
    $49.50
    AC1872
    Manifold stud set with brass nuts for Allis-Chalmers Late D17, 170 Gas, 175 Gas, and G-226 applications. New 6-piece set.Part Number: AC1872FitsAllis Chalmers Late D17Allis Chalmers 170 GasAllis...
    Add to Cart
  • Allis Chalmers G Wiring Harness, packaged in a clear plastic bag with color-coded wires and numbered labels.

    Allis Chalmers G Wiring Harness

    Allis-Chalmers
    $49.25
    553
    Part Number: ACR4764 Allis Chalmers G Wiring Harness Wiring harness for Allis Chalmers G tractors. Fits Allis Chalmers G Replaces / Cross Reference 800136 Notes For generator systems only 6 volt...
    Add to Cart
  • Gray rectangular metal battery box side panel for an Allis-Chalmers farm tractor, with a small mounting hole near one upper corner.

    Allis Chalmers Battery Box Side - DJS063S

    Allis-Chalmers
    $49.00
    DJS063S
    OverviewUSA made battery box side for Allis Chalmers tractors. Part Number: DJS063S.FitsAllis Chalmers BAllis Chalmers GAllis Chalmers CAllis Chalmers CAAllis Chalmers D10Allis Chalmers D12Allis...
    Add to Cart
  • Allis-Chalmers 12 Volt Bullet Tail Light, compact silver and red automotive lighting with mounting bolt and wiring for tractor or vehicle tail light.

    Allis-Chalmers 12 Volt Bullet Tail Light

    Allis-Chalmers
    $47.75
    AC-264V12D
    12 volt bullet tail light for select Allis-Chalmers tractors. It includes a 12-volt bulb and a red glass lens.Part Number: AC-264V12DFitsAllis Chalmers: B, C, CA, G, WD, WD45, D10 (up to sn 9001),...
    Add to Cart
  • Allis-Chalmers G 1948-1955 Vinyl Cut Decal Set, vintage tractor decal stickers for Allis-Chalmers G model from 1948 to 1955.

    Allis Chalmers G 1948-1955 Vinyl Cut Decal Set

    Allis-Chalmers
    $47.00
    DJS116
    Allis Chalmers G 1948-1955 vinyl cut decal set. No refunds on vinyl cut decals. Store in a cool, dry place. Do not soak in water.Part Number: DJS116FitsAllis Chalmers: G 1948-1955NotesNO REFUNDS ON...
    Add to Cart
  • An orange metal pulley end bearing bracket designed for Allis-Chalmers farm tractors, specifically the G model, with four holes for mounting and a large circular hole. The bracket is rectangular with a bent side creating an L-shape.

    Allis Chalmers G Pulley End Bearing Bracket

    Allis-Chalmers
    $46.50
    70800418
    Part Number: 70800418Product OverviewPulley end bearing bracket for Allis Chalmers G tractors. Listed as a fan shaft pulley end bearing bracket.FitsAllis Chalmers GReplaces / Cross...
    Add to Cart
  • Allis-Chalmers Pre-cleaner Cap Assembly - AB-470D, black and transparent pre-cleaner cap for industrial equipment, with mounting base and adjustable clamp.

    Pre-cleaner Cap Assembly AB-470D

    Allis-Chalmers
    $45.95
    AB-470D
    Product OverviewPre-cleaner cap assembly AB-470D for selected tractors and equipment. Only models with 3" ID base and 7" bowl are listed.Note: Replacement numbers are listed below for reference...
    Add to Cart
  • Allis-Chalmers Allis Chalmers 6 Volt Bullet Tail Light, vintage vehicle accessory with silver housing, red lens, and white wiring

    Allis Chalmers 6 Volt Bullet Tail Light

    Allis-Chalmers
    $45.75
    AC-264V6D
    6 volt bullet tail light for select Allis Chalmers and John Deere tractors. Restoration quality, with 6-volt bulb included and a red glass lens.Part Number: AC-264V6DFitsAllis Chalmers: B, C, CA, G,...
    Add to Cart
  • Aftermarket Top Link, industrial mechanical linkage component for heavy machinery or agricultural equipment, shown with a rod and mounting eye

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT...
    Add to Cart
  • Long, flat gray metal drawbar with a hole near each end, shown diagonally on a white background. For an Allis-Chalmers G farm tractor.

    Allis Chalmers G Drawbar

    Allis-Chalmers
    $45.00
    KI1082
    Drawbar for Allis Chalmers G tractors with serial number 26751 and up.Part Number: KI1082FitsAllis Chalmers G Tractor (SN 26751 & Up)Replaces / Cross Reference70800456800456NotesIf drawbar clip /...
    Add to Cart