Same Day Shipping On 99% Of Orders

Allis Chalmers G Tractor Parts

About the Allis-Chalmers G

The Allis-Chalmers G was built for small farms, gardens, and vegetable growers, but it looked unlike a conventional tractor. Its Continental four-cylinder engine sat at the rear, leaving the front open for a clear view of mounted tools.

Built in Gadsden, Alabama, from 1948 through 1955, the G was a tool carrier rather than a general-purpose row-crop tractor. Allis-Chalmers offered a line of implements that mounted under the tractor, making the small machine especially useful for cultivating and other close-in work.

Serial Number Reference

Serial number locations: The tractor serial number is stamped next to the starter on the engine. The engine serial number is on the starter side of the engine near the starter.

The table below shows the beginning tractor serial number for each Model G year:

 

1948-1950
Model G year Beginning serial number
1948 6
1949 10,961
1950 23,180
1951-1953
Model G year Beginning serial number
1951 24,006
1952 25,269
1953 26,497
1954-1955
Model G year Beginning serial number
1954 28,036
1955 29,036

Total production: 29,976 Model G tractors.

Allis-Chalmers G Paint Reference

For restoration planning, the Allis-Chalmers G is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers G paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Silver Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Allis Chalmers 6 Volt Bullet Tail Light, vintage vehicle accessory with silver housing, red lens, and white wiring

    Allis Chalmers 6 Volt Bullet Tail Light

    Allis-Chalmers
    $45.75
    AC-264V6D
    6 volt bullet tail light for select Allis Chalmers and John Deere tractors. Restoration quality, with 6-volt bulb included and a red glass lens.Part Number: AC-264V6DFitsAllis Chalmers: B, C, CA, G,...
    Add to Cart
  • Aftermarket Top Link, industrial mechanical linkage component for heavy machinery or agricultural equipment, shown with a rod and mounting eye

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT...
    Add to Cart
  • Allis-Chalmers Allis Chalmers G Drawbar - 70800456

    Allis Chalmers G Drawbar

    Allis-Chalmers
    $45.00
    KI1082
    Drawbar for Allis Chalmers G tractors with serial number 26751 and up.Part Number: KI1082FitsAllis Chalmers G Tractor (SN 26751 & Up)Replaces / Cross Reference70800456800456NotesIf drawbar clip /...
    Add to Cart
  • Allis-Chalmers 12-Volt Bullet Style Tail Light, black tail light with red wire, for Allis Chalmers B, C, CA, G, WD, WD45, D10, D12, D14 tractor models.

    12-Volt Bullet Style Tail Light for Allis Chalmers B C CA G WD WD45 D10 D12 D14

    Allis-Chalmers
    $44.75
    OL-070D
    12-volt bullet style tail light for Allis-Chalmers tractors. Painted black piggy lamp.Part Number: OL-070DFitsAllis Chalmers: B, C, CA, G, WD, WD45, D10, D12, D14Minneapolis Moline: 4 Star, 5 Star,...
    Add to Cart
  • Allis-Chalmers Universal Alternator Mounting Bracket Kit

    Universal Alternator Mounting Bracket Kit

    Allis-Chalmers
    $44.75
    AB-404D
    Universal alternator mounting bracket kit for switching from a generator to an alternator. May have to be drilled or modified for your application.Part Number: AB-404DFitsAllis...
    Add to Cart
  • Allis-Chalmers 6 Volt Bullet Style Tail Light, black vintage vehicle tail light with red wiring for tractor or farm equipment

    6 Volt Bullet Style Tail Light

    Allis-Chalmers
    $44.50
    OL-069D
    6 Volt Bullet Style Tail Light for the listed Allis-Chalmers, MM, and Oliver models.Piggy lamp painted black.Part Number: OL-069DFitsALLIS CHALMERS: B, C, CA, G, WD, WD45, D10, D12, D14MM: JET STAR,...
    Add to Cart
  • AGCO OEM Allis Chalmers Amp Gauge (60-0-60) - D10-D21, 170-220 - 70254407

    OEM Allis Chalmers Ammeter Gauge 60-0-60

    AGCO
    $44.50
    70254407
    OEM AGCO ammeter gauge marked Amperes 60-0-60 for listed Allis Chalmers tractors and power units.Part Number: 70254407FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis...
    Add to Cart
  • Allis-Chalmers G Instrument Panel Primered (Display), used part metal display with circular and oval cutouts for gauges or controls.

    Allis-Chalmers G Instrument Panel Primered (Display)

    $44.00
    552
    Primered instrument panel for Allis-Chalmers G tractors. This replacement panel is supplied primered for final prep and paint. Part Number: AC-338D Fits Allis Chalmers G Replaces / Cross...
    Add to Cart
  • Allis-Chalmers G Battery Box Bracket Set, 2-Piece, AC-1260D, metal brackets with holes for battery box mounting.

    Allis-Chalmers G Battery Box Bracket Set, 2-Piece, AC-1260D

    Allis-Chalmers
    $43.75
    AC-1260D
    Allis-Chalmers G Battery Box Bracket SetThis 2-piece battery box bracket set fits the Allis-Chalmers G tractor. Part number AC-1260D.USA made. Primer finish color may vary.FitsAllis-Chalmers...
    Add to Cart
  • A close-up image of an Allis-Chalmers G Fan End Shaft Bearing, showing its circular shape and inner and outer rings, primarily black in color with some metallic parts.

    Allis-Chalmers G Fan End Shaft Bearing

    Allis-Chalmers
    $43.75
    70800420
    Fan End Shaft Bearing for Allis-Chalmers G tractors.New replacement part.Part Number: 70800420FitsAllis-Chalmers GReplaces / Cross Reference70800420800420Ordering NotesConfirm bearing location and...
    Add to Cart
  • A close-up image of a black bearing ring with metal inner parts, labeled with the product number 70800421.

    Allis-Chalmers G Pulley End Fan Shaft Bearing 70800421

    Allis-Chalmers
    $43.75
    70800421
    Allis-Chalmers G pulley end fan shaft bearing. New part, SKU 70800421.Part Number: 70800421FitsAllis-Chalmers GReplaces / Cross Reference70800421800421Ordering NotesConfirm bearing location and part...
    Add to Cart
  • Allis-Chalmers Allis Chalmers I&T Shop Service Manual, cover page with tractor illustration and red and white design.

    Allis Chalmers I&T Shop Service Manual

    Allis-Chalmers
    $41.75
    AC-11M
    Allis Chalmers I&T Shop Service ManualReprint of the manual the factory furnished to the dealer service department. Written in the language of a mechanic, it includes specifications, torques, and...
    Add to Cart
  • Allis-Chalmers G Brake Pedal Shaft, elongated metal shaft with holes for mounting.

    Allis-Chalmers G Brake Pedal Shaft

    Allis-Chalmers
    $41.75
    70800000
    Brake pedal shaft for Allis-Chalmers G tractors. New part listed with the replacement numbers below.Part Number: 70800000FitsAllis-Chalmers GReplaces / Cross Reference70800000800000NotesNew condition.
    Add to Cart
  • A metallic rear axle collar for Allis-Chalmers G farm tractors, cylindrical with a smooth surface and open center.

    Allis Chalmers G Rear Axle Collar

    Allis-Chalmers
    $41.00
    70800165
    Allis Chalmers G Rear Axle CollarNew rear axle collar for the Allis Chalmers G. It holds the axle, axle seal, and bearing in place in the axle tube.Part Number: 70800165FitsAllis Chalmers GNotes1...
    Add to Cart
  • Allis-Chalmers 3-Position Light Switch AC-139D 70208197 208197, electronic switch with a black labeled button for lights.

    Allis-Chalmers 3-Position Light Switch AC-139D 70208197 208197

    Allis-Chalmers
    $39.75
    AC-139D
    Allis-Chalmers 3-Position Light SwitchPart Number: AC-139DUse this 3-position light switch for the listed tractor models and replacement numbers below. Switch manufacturers consider OFF as 1 position...
    Add to Cart
  • Allis-Chalmers Brake Riveting Rivet Tool

    Allis-Chalmers Brake Riveting Rivet Tool MI-1131D

    Allis-Chalmers
    $39.75
    MI-1131D
    OverviewBrake riveting rivet tool for Allis-Chalmers and other tractor applications. Use to rivet brake linings to an existing shoe or band. Includes tools for removing old rivets, drilling and...
    Add to Cart
  • Allis Chalmers G Parts Manual, a spiral-bound technical manual with a wooden textured cover and an illustration of the engine parts.

    Allis-Chalmers G Parts Manual MAN1817D

    Allis-Chalmers
    $39.75
    MAN1817D
    Allis-Chalmers G Parts ManualModel: Allis-Chalmers GPart No.: MAN1817DThis parts manual includes exploded views of tractor components with numbered illustrations to help identify parts for ordering,...
    Add to Cart
  • Allis-Chalmers G, 170, 175, 180 Sediment Bowl Assembly, metallic fuel filter with clear plastic sediment bowl.

    Allis-Chalmers G, 170, 175, 180 Sediment Bowl Assembly

    Allis-Chalmers
    $39.75
    AC-326D
    Sediment bowl assembly for Allis-Chalmers G, 170, 175, and 180. This assembly includes horizontal inlet and outlet with side inlet and outlet, 1/8" x 1/8" female pipe thread.Part Number:...
    Add to Cart