Same Day Shipping On 99% Of Orders

Allis Chalmers G Tractor Parts

About the Allis-Chalmers G

The Allis-Chalmers G was built for small farms, gardens, and vegetable growers, but it looked unlike a conventional tractor. Its Continental four-cylinder engine sat at the rear, leaving the front open for a clear view of mounted tools.

Built in Gadsden, Alabama, from 1948 through 1955, the G was a tool carrier rather than a general-purpose row-crop tractor. Allis-Chalmers offered a line of implements that mounted under the tractor, making the small machine especially useful for cultivating and other close-in work.

Serial Number Reference

Serial number locations: The tractor serial number is stamped next to the starter on the engine. The engine serial number is on the starter side of the engine near the starter.

The table below shows the beginning tractor serial number for each Model G year:

 

1948-1950
Model G year Beginning serial number
1948 6
1949 10,961
1950 23,180
1951-1953
Model G year Beginning serial number
1951 24,006
1952 25,269
1953 26,497
1954-1955
Model G year Beginning serial number
1954 28,036
1955 29,036

Total production: 29,976 Model G tractors.

Allis-Chalmers G Paint Reference

For restoration planning, the Allis-Chalmers G is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers G paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Silver Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Circular Allis-Chalmers G tractor input shaft seal with a dark red outer rim, weathered metal face, and black inner lip around the center opening, shown against a white background.

    Allis Chalmers G Input Shaft Seal

    Allis-Chalmers
    $14.25
    70800371
    Input shaft seal for Allis Chalmers G tractors. Listed with replacement numbers 70800371 and 800371.Part Number: 70800371FitsAllis Chalmers GReplaces / Cross Reference70800371800371Specs1.632" OD0...
    Add to Cart
  • Allis-Chalmers Cork / Rubber Rollpack Gasket Material, cylindrical rolled gasket with cork and rubber composition for industrial sealing applications.

    Cork / Rubber Rollpack Gasket Material

    Allis-Chalmers
    $14.00
    AB-1830D
    Cork / Rubber Rollpack Gasket Material for making multi-purpose gaskets. USA made and sold as a 12" x 24" sheet.Part Number: AB-1830DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn...
    Add to Cart
  • Round red 12-volt tail light assembly for an Allis-Chalmers farm tractor, with a ribbed red lens, dark housing, and red and black wires.

    12 Volt Round Red Tail Light Assembly w/ License Lamp Window

    Allis-Chalmers
    $13.75
    AB-548D
    Part Number: AB-548D12 Volt Round Red Tail Light Assembly w/ License Lamp Window12 volt round red tail light assembly with a license lamp window. For multiple tractor applications listed below...
    Add to Cart
  • Allis-Chalmers Ignition Tune-Up Kit W/ Rotor (Delco Distributor), automotive ignition components including rotor, condenser, and mounting hardware.

    Ignition Tune-Up Kit W/ Rotor for Delco Distributor ACR1932

    Allis-Chalmers
    $13.75
    ACR1932
    Ignition Tune-Up Kit W/ Rotor for Delco DistributorThe Ignition Tune-Up Kit W/ Rotor (For Delco) - ACR1932 includes a point set, a vibration-resistant condenser, and a rotor button.It is made for...
    Add to Cart
  • Allis-Chalmers Pre Cleaner Bowl 7 Inch Diameter, clear plastic bowl for agricultural equipment.

    Pre Cleaner Bowl 7" Diameter

    Allis-Chalmers
    $13.75
    AB-338D
    7" diameter pre cleaner bowl. Clear plastic bowl for air intake applications on listed tractors and combines.Part Number: AB-338DFitsAllis Chalmers: D17 diesel up to serial number 38964; combines A,...
    Add to Cart
  • Bright orange Allis-Chalmers farm tractor steering wheel spinner knob with silver mounting brackets, bolts, and nuts arranged on a white background.

    Orange Steering Wheel Spinner Knob

    Allis-Chalmers
    $13.50
    WSV125OR
    Weather-resistant orange steering wheel spinner knob with a sealed ball bearing. Includes a vinyl-coated aluminum knob and 2 brackets for regular and deep spoked wheels.Part Number: WSV125ORFitsAllis...
    Add to Cart
  • Allis-Chalmers Steering Wheel Spinner, metallic steering wheel knob and mounting hardware on white background.

    Steering Wheel Spinner

    Allis-Chalmers
    $13.50
    ACR3275
    Ball bearing steering wheel spinner made of aluminum.Part Number: ACR3275FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational - variousJohn Deere - variousMassey...
    Add to Cart
  • A universal 2-position push-pull switch designed for Allis-Chalmers farm tractors, not for automobiles.

    Universal 2 Position Push Pull Switch

    Allis-Chalmers
    $13.50
    DJS398
    Universal 2 position push pull switch for agricultural and light industrial equipment. For ignition switch applications, it can be used only on battery ignition systems.Switch is a 10amp switch with...
    Add to Cart
  • Allis-Chalmers Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey, representing a shiny, round metal fuel cap with a textured edge.

    Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey

    Allis-Chalmers
    $13.00
    AB-003D
    Chrome fuel cap with gasket and vented design for the listed tractor applications.Part Number: AB-003DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, I-40, I-400, I-60, I-600;...
    Add to Cart
  • Aftermarket In-Line Fuel Filter AB-490D

    In-Line Fuel Filter for Various Models

    Aftermarket
    $12.95
    AB-490D
    In-line fuel filter for various models using 3/8" fuel lines. Includes hose and clamps.Use to help keep rust and dirt out of the carburetor.Part Number: AB-490DFitsAllis...
    Add to Cart
  • A gasket made of dark material with three holes, designed for Allis-Chalmers farm tractors such as the 180, 185, 190, and 190XT models

    Oil Filter Housing to Block Gasket for Allis Chalmers 180, 185, 190, 190XT

    Allis-Chalmers
    $12.75
    74025120
    Oil Filter Housing to Block Gasket for Allis Chalmers 180, 185, 190, and 190XT.Listed as OEM AGCO Brand.Part Number: 74025120FitsAllis Chalmers 180Allis Chalmers 185Allis Chalmers 190Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Starter Switch Allis Chalmers B C CA G IB RC WC WD WD45 WF

    Starter Switch for Allis-Chalmers B C CA G IB RC WC WD WD45 WF

    Allis-Chalmers
    $12.75
    AB-012D
    Part Number: AB-012DStarter Switch for Allis-Chalmers B C CA G IB RC WC WD WD45 WFManual foot / lever starter switch with saddle mount. Does not fit Autolite starter applications.FitsAllis-Chalmers:...
    Add to Cart
  • Allis-Chalmers Power Director Light Lens - Green, close-up of a vibrant green light lens with a ribbed, dome-shaped design on a plain white background.

    Allis Chalmers Power Director Light Lens - Green

    Allis-Chalmers
    $12.25
    70240838-G
    Green Power Director light lens for select Allis Chalmers tractors.Use the part numbers below to confirm your application.Part Number: 70240838-GFitsAllis Chalmers D17, D19, D21, 170, 175, 180, 185,...
    Add to Cart
  • Allis-Chalmers G Oil Pan Gasket, rectangular brown gasket with multiple bolt holes.

    Allis-Chalmers G Oil Pan Gasket

    Allis-Chalmers
    $12.00
    AC-357D
    Oil pan gasket for Allis-Chalmers G and Massey Harris PONY. Also for others with N62 Continental engines.Part Number: AC-357DFitsAllis Chalmers: GMassey Harris: PONYOthers with N62 Continental...
    Add to Cart
  • Allis-Chalmers Delco Distributor Cap Spring Clip With Shorter Bracket, metal spring clip, bracket and screw for engine distributor

    Delco Distributor Cap Spring Clip AB-488SD

    Allis-Chalmers
    $12.00
    AB-488SD
    Distributor Cap Spring Clip AB-488SDAB-488SD is a Delco distributor cap spring clip with the shorter bracket. It includes 1 spring clip, 1 bracket, 1 screw, and 2 washers.The bracket measures .700"...
    Add to Cart
  • Close-up of a metal 180-degree thermostat for an Allis-Chalmers farm tractor, with a wide circular flange, central brass-colored valve, and coiled spring.

    180 Degree Thermostat - Allis-Chalmers

    Allis-Chalmers
    $11.75
    74025103
    180 Degree Thermostat for select Allis Chalmers tractors and equipment.Part Number: 74025103FitsAllis Chalmers D17Allis Chalmers D19Allis Chalmers D21Allis Chalmers 180Allis Chalmers 185Allis...
    Add to Cart
  • Allis Chalmers Gear Shift Lever Pins, Pair Oversized (Display), two metal pins with different sizes and shapes on a brown background with a white label showing the number 653 and 'Used Parts / Display' text.

    Allis Chalmers Gear Shift Lever Pins, Pair Oversized (Display)

    Allis-Chalmers
    $11.75
    653
    Allis Chalmers gear shift lever pins, pair, oversized. AC-253D is used to tighten up a worn shift lever and must be ground to fit the existing worn lever. Part Number: AC-253D Fits Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Bullet Tail Light Trim Ring, black glossy metal ring with a small hole at the bottom for mounting, used as a decorative and protective part for vintage tractor tail lights.

    Bullet Tail Light Trim Ring

    Allis-Chalmers
    $11.75
    OL-071D
    Bullet Tail Light Trim Ring for select tractor tail lights.Verify fitment against your existing tail light before ordering.Part Number: OL-071DFitsAllis Chalmers: B, C, CA, G, WD, WD45International:...
    Add to Cart