Same Day Shipping On 99% Of Orders

Allis Chalmers G Tractor Parts

About the Allis-Chalmers G

The Allis-Chalmers G was built for small farms, gardens, and vegetable growers, but it looked unlike a conventional tractor. Its Continental four-cylinder engine sat at the rear, leaving the front open for a clear view of mounted tools.

Built in Gadsden, Alabama, from 1948 through 1955, the G was a tool carrier rather than a general-purpose row-crop tractor. Allis-Chalmers offered a line of implements that mounted under the tractor, making the small machine especially useful for cultivating and other close-in work.

Serial Number Reference

Serial number locations: The tractor serial number is stamped next to the starter on the engine. The engine serial number is on the starter side of the engine near the starter.

The table below shows the beginning tractor serial number for each Model G year:

 

1948-1950
Model G year Beginning serial number
1948 6
1949 10,961
1950 23,180
1951-1953
Model G year Beginning serial number
1951 24,006
1952 25,269
1953 26,497
1954-1955
Model G year Beginning serial number
1954 28,036
1955 29,036

Total production: 29,976 Model G tractors.

Allis-Chalmers G Paint Reference

For restoration planning, the Allis-Chalmers G is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers G paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Silver Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Black cylindrical air cleaner hose for an Allis-Chalmers G farm tractor, part number 70207173, shown alone on a white background.

    Allis-Chalmers G Air Cleaner Hose 70207173

    Allis-Chalmers
    $4.00
    70207173 (001)
    Allis-Chalmers G air cleaner hose, sold individually. Used as an air cleaner hose on the G and fits several other listed applications.Part Number: 70207173 (001)FitsAllis Chalmers: Radiator Hose...
    Add to Cart
  • Reflective metal brake disk ball for an Allis-Chalmers farm tractor, shown against a white background.

    Brake Disk Ball

    Allis-Chalmers
    $4.00
    BDB100
    Brake disk ball for multiple tractor applications.Part Number: BDB100FitsAllis Chalmers - 190XT, D19, D21, 170, 175, 180, 185, 190, 200 (4 used per side), D17 (SN: 75001 and up; 4 used per side),...
    Add to Cart
  • Allis-Chalmers Carburetor Gasket for Allis Chalmers, Avery, Farmall, Massey Harris, black rubber gasket with central hole and two smaller holes for mounting.

    Carburetor Gasket for Allis Chalmers, Avery, Farmall, Massey Harris

    Allis-Chalmers
    $4.00
    AB-543D
    Carburetor to manifold mounting gasket for the listed Allis Chalmers, Avery, Farmall, International Harvester, and Massey Harris applications.Part Number: AB-543DFitsAllis Chalmers: G with N62...
    Add to Cart
  • Allis-Chalmers Delco Rotor Button AB-520D, a metallic electrical component with a rounded rotor button attached to a gold-colored arm, mounted on a black base.

    Delco Rotor Button

    Allis-Chalmers
    $4.00
    AB-520D
    Part Number: AB-520DProduct OverviewDelco rotor button for applications with a Delco clip held cap.FitsAllis Chalmers: B, IB, C, CA, G, RC, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19Avery: A, BF,...
    Add to Cart
  • A black gasket designed for Allis-Chalmers farm tractors, not for automobiles, suitable for brands like Allis Chalmers, International, John Deere, Massey Harris, and Minneapolis Moline.

    Gasket for Allis Chalmers, International, John Deere, Massey Harris, Minneapolis Moline

    Allis-Chalmers
    $4.00
    AB-3352D
    Gasket for select Allis-Chalmers, International, John Deere, Massey Harris, and Minneapolis Moline applications.Part Number: AB-3352DFitsAllis Chalmers - B, C, CA, D14, D17, U, WC, WD, WF (Auxiliary...
    Add to Cart
  • Allis-Chalmers Sediment Glass Bowl Only, clear glass sediment bowl with metal rim for industrial or agricultural equipment.

    Sediment Glass Bowl Only

    Allis-Chalmers
    $4.00
    AB-123D
    Replacement sediment glass bowl only for listed tractor applications. Fits multiple Allis-Chalmers, Case, Ford, International, John Deere, Massey Ferguson, Oliver, and White models.Part Number:...
    Add to Cart
  • Allis-Chalmers Hose Clamp - 1-5/8" OD AB-492D, an adjustable metal hose clamp with a screw mechanism for securing hoses.

    Hose Clamp - 1-5/8" OD

    Allis-Chalmers
    $3.95
    AB-492D
    Hose clamp for 1-5/8" OD applications. Fits select Allis-Chalmers and Ford tractor models listed below.Part Number: AB-492DFitsAllis Chalmers: Upper and/or lower radiator hose clamp on B, IB, C, CA,...
    Add to Cart
  • Allis-Chalmers Brass Sediment Bowl Screen, metallic brass disc with a fine mesh pattern for filtering sediment.

    Brass Sediment Bowl Screen

    Allis-Chalmers
    $3.75
    AB-229D
    Brass sediment bowl screen for listed tractors and combines.Part Number: AB-229DFitsAllis Chalmers - 190XT, B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, I40, I400, I60, I600, IB, RC, U, UC, WC,...
    Add to Cart
  • A brass fuel line compression fitting designed for Allis-Chalmers farm tractors. It connects a 5/16 inch fuel line to a 1/8 inch pipe, suitable for various model tractors.

    Fuel Line Compression Fitting 5/16" Line to 1/8" Pipe - Various Models

    Allis-Chalmers
    $3.75
    516FITTING
    Fuel line compression fitting for various Allis-Chalmers models. Connects 5/16" line to 1/8" pipe and is used on sediment bowls in most applications.Part Number: 516FITTINGFitsAllis Chalmers -...
    Add to Cart
  • A coil of tan 1-inch fuel tank webbing with a short length unrolled, for Allis-Chalmers farm tractors.

    Allis-Chalmers Fuel Tank Webbing - Tan 1"

    Allis-Chalmers
    $3.25
    3531T51
    Tan fuel tank webbing sold per foot. Fits tractors using webbed insulation between fuel tank mounts and sheet metal parts.Part Number: 3531T51FitsAllis Chalmers: Fits various modelsCase: Fits various...
    Add to Cart
  • Allis-Chalmers 6 Volt Tail Light Bulb for Allis Chalmers, Ford, International, showing a small cylindrical metal base and a clear glass bulb with filament inside.

    6 Volt Tail Light Bulb for Allis Chalmers, Ford, International

    Allis-Chalmers
    $3.00
    AB-344D
    Part Number: AB-344D6 Volt Tail Light Bulb6 volt tail light bulb for listed tractor applications. Any bullet style light.FitsAllis Chalmers G, B, C, CA, WD45, WDFord 2000 3 Cylinder, 2000 4 cylinder,...
    Add to Cart
  • Allis-Chalmers Bullet Tail Light Gasket Allis Chalmers B C CA G WD WD45

    Bullet Tail Light Gasket for Allis-Chalmers B C CA G WD WD45

    Allis-Chalmers
    $3.00
    OL-072D
    Rubber bullet tail light gasket for Allis-Chalmers tractors. Interchangeable with the original cork gasket.Part Number: OL-072DFitsAllis Chalmers: B, C, CA, G, WD, WD45International: Super A, Super...
    Add to Cart
  • Allis-Chalmers Front Wheel Lug Bolt Rear Rim Lug Bolt

    Front Wheel Lug Bolt Rear Rim Lug Bolt

    Allis-Chalmers
    $3.00
    AB-399D
    Front wheel lug bolt / rear rim lug bolt. New, zinc-coated bolt with listed model applications and replacement numbers below.Part Number: AB-399DFitsAllis Chalmers: B, C, CA, RC, WC, WD, WD45, G,...
    Add to Cart
  • Roll of black 2-inch fuel tank webbing for Allis-Chalmers farm tractors, with a short length unrolled.

    Allis-Chalmers Fuel Tank Webbing - Black 2"

    Allis-Chalmers
    $2.75
    351T84
    Black fuel tank webbing sold per foot. Fits tractors using webbed insulation between fuel tank mounts and sheet metal parts.Part Number: 351T84FitsAllis Chalmers: variousCase: Fits various...
    Add to Cart
  • Roll of black 1½-inch-wide fuel tank webbing for Allis-Chalmers farm tractors, with a short strip unwound, shown on a white background.

    Allis-Chalmers Fuel Tank Webbing - Black 1-1/2"

    Allis-Chalmers
    $2.40
    3510T83
    Black fuel tank webbing sold per foot. Fits tractors using webbed insulation between fuel tank mounts and sheet metal parts.Part Number: 3510T83FitsAllis Chalmers: variousCase: variousCockshutt:...
    Add to Cart
  • A roll of black, 1-inch-wide Allis-Chalmers fuel tank webbing with a short strip unrolled, sold by the foot.

    Fuel Tank Webbing - Black 1" - Price Per Foot

    Allis-Chalmers
    $2.35
    3510T82
    Black fuel tank webbing for tractors using webbed insulation between fuel tank mounts and other sheet metal parts.Part Number: 3510T82FitsAllis-ChalmersCaseWhite /OliverCockshutFordInternational /...
    Add to Cart
  • Allis-Chalmers Sediment Bowl Gasket 2"

    Sediment Bowl Gasket 2"

    Allis-Chalmers
    $2.25
    AB-039D
    Sediment Bowl Gasket 2" for the listed tractor models. Part Number: AB-039D Fits Allis Chalmers: B, C, CA, G, D10, D12, D14, D15 (Gas To Sn# 9000), D17 (Gas To Sn# 42000), I40, I400, I60, I600, 170,...
    Add to Cart
  • Aftermarket 3 PT Lynch Pin, metallic pin with a circular ring for securing attachments in farming equipment.

    3 PT Lynch Pin

    Aftermarket
    $2.00
    MI-119D
    3 PT Lynch Pin for 3-point equipped tractors and implements using 7/16" diameter pins.Part Number: MI-119DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey...
    Add to Cart