Same Day Shipping On 99% Of Orders

Allis Chalmers WC Tractor Parts

About the Allis-Chalmers WC

The WC was an important early row-crop tractor built by Allis-Chalmers. It was also the first tractor tested on rubber tires at the Nebraska Tractor Test Laboratory. With its four-speed transmission and row-crop design, it was well suited to general farm work.

The WC was built from 1933 through 1948. In 1938, starting at serial number WC74330, Allis-Chalmers introduced the styled WC with a rounded radiator and larger tires.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the rear of the rear axle housing. The engine serial number is on the left-hand side of the engine near the carburetor.

The table below shows the beginning tractor serial number for each Model WC year:

 

1933-1938
Model WC year Beginning serial number
1933 - Unstyled 1
1934 - Unstyled 29
1935 - Unstyled 3,127
1936 - Unstyled 13,870
1937 - Unstyled 31,784
1938 - Unstyled 60,790
1938-1943
Model WC year Beginning serial number
1938 - Styled 74,330
1939 - Styled 75,216
1940 - Styled 91,534
1941 - Styled 103,517
1942 - Styled 114,534
1943 - Styled 123,171
1944-1948
Model WC year Beginning serial number
1944 - Styled 127,642
1945 - Styled 134,624
1946 - Styled 148,091
1947 - Styled 152,845
1948 - Styled 170,174

Total production: 178,202 Model WC tractors.

Allis-Chalmers WC Paint Reference

For restoration planning, the Allis-Chalmers WC is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers WC paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Black, Dark Green, Orange 1 Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey, representing a shiny, round metal fuel cap with a textured edge.

    Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey

    Allis-Chalmers
    $13.00
    AB-003D
    Chrome fuel cap with gasket and vented design for the listed tractor applications.Part Number: AB-003DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, I-40, I-400, I-60, I-600;...
    Add to Cart
  • Allis-Chalmers Used Allis-Chalmers Oil Filter Base, used and weathered oil filter base with mounting bracket and attached hose.

    Used Allis-Chalmers Oil Filter Base

    Allis-Chalmers
    $25.00
    412
    Used Allis-Chalmers oil filter base, part 412.All sales final on used items.Part Number: 412FitsBIBCCAD10D12D14D17WDWD45WCRCWFNotesUsed item.No returns accepted on used items.
    Add to Cart
  • Allis-Chalmers Used Allis-Chalmers Oil Filter Base, used and rusty vintage machinery part for filters.

    Used Allis-Chalmers Oil Filter Base

    Allis-Chalmers
    $25.00
    407
    Used Allis-Chalmers oil filter base, part 407.All sales final on used items.Part Number: 407FitsBIBCCAD10D12D14D17WDWD45WCRCWFNotesUsed item.No returns accepted on used items.
    Out of stock
  • Allis-Chalmers Universal Oil Pressure Gauge (0-30 LB), black dial with white markings, measuring oil pressure in pounds per square inch.

    Universal Oil Pressure Gauge (0-30 LB)

    Allis-Chalmers
    $19.75
    AB-004BD
    Universal oil pressure gauge with a 0-30 LB range.Part Number: AB-004BDFitsAllis Chalmers - B, C, CA, G, IB, RC, WC, WD, WD45, WFJohn Deere - 420, 32, MT, MI, MC, M, LA, L, H, GPO, GP, G, D, BR, B,...
    Add to Cart
  • Allis-Chalmers Temperature Gauge Black Needle, water temperature gauge with a black needle for Allis-Chalmers tractors models B, IB, C, CA, RC, WC, WD, WD45, WF.

    Allis Chalmers Temperature Gauge Black Needle for B IB C CA RC WC WD WD45 WF

    Allis-Chalmers
    $31.75
    ACR0934
    Allis Chalmers temperature gauge with a white face and black needle. It has the Allis Chalmers name, screws into the radiator neck, and is like original.Part Number: ACR0934FitsAllis Chalmers BAllis...
    Add to Cart
  • Aftermarket 12V Distributor Hot Coil 55000 Volts Internally Resisted, black electrical coil component with mounting brackets and terminal connectors.

    12V Distributor Hot Coil 55000 Volts Internally Resisted

    Aftermarket
    $59.75
    AB-6158D
    12V distributor hot coil with 55,000 volts and internally resisted design. No external resistor required.Works with or without electronic ignition system.Part Number: AB-6158DFitsAllis Chalmers - B,...
    Add to Cart
  • Allis-Chalmers Front Wheel Hub Cap for Allis-Chalmers WD45, WD, D14, D15, D17, close-up view of a metallic wheel hub cap with a hexagonal center and smooth finish.

    Front Wheel Hub Cap for Allis-Chalmers WD45, WD, D14, D15, D17

    Allis-Chalmers
    $29.75
    AC-5389D
    Front Wheel Hub Cap for Allis-Chalmers WD, WD45, D14, D15, and D17.Threaded front wheel hub cap with the listed measurements below.Part Number: AC-5389DFitsAllis Chalmers WDAllis Chalmers WD45Allis...
    Add to Cart
  • Allis-Chalmers Premium Distributor Cap 4 Cylinder, close-up view of black distributor cap designed for various tractors including Allis Chalmers, Avery, Case, Cockshutt, International/Farmall, John Deere, Massey Ferguson, Massey Harris, Minneapolis Moline, Oliver.

    Premium Distributor Cap 4 Cylinder for Allis Chalmers, Avery, Case, Cockshutt, International/Farmall, John Deere, Massey Ferguson, Massey Harris, Minneapolis Moline, Oliver

    Allis-Chalmers
    $18.75
    AB-6165D
    distributor cap for 4-cylinder applications.~ Brass contacts, Bakelite ~ MADE IN USAPart Number: AB-6165DFitsAllis Chalmers: D10, D12, D14, D15, D17, RC, H3, B, IB, C, G, CA, WD, WD45, WC, WFAvery:...
    Add to Cart
  • Allis-Chalmers Exhaust Manifold Side Pipe, black metal exhaust pipe for Allis Chalmers WC and WF tractors.

    Exhaust Manifold Side Pipe for Allis Chalmers WC WF

    Allis-Chalmers
    $28.75
    70203180
    Exhaust manifold side pipe for Allis Chalmers WC and WF. Fits the AC-085D manifold with 45 degree side exhaust. Part Number: 70203180 Fits Allis Chalmers: WC, WF AC-085D Manifold with
    Add to Cart
  • Pertronix Electronic Ignition Conversion Kit 6V Positive Ground for Allis Chalmers, image of electronic ignition components including wiring, a rotor, and other installation parts.

    Electronic Ignition Conversion Kit 6V Positive Ground for Allis Chalmers B, IB, C, CA, D10, D12, D14, D15, D17, G, WC, WD, WD45, WF

    Pertronix
    $237.50
    ACR3188
    Electronic Ignition Conversion Kit for 6V positive ground Allis-Chalmers applications. Replaces points and condenser with a breakerless solid-state ignition system that fits under the stock...
    Add to Cart
  • Allis-Chalmers Timing Gear Cover Gasket, engine timing gear cover gasket for Allis Chalmers D17, WC, WD, WD45, WF, 170, 175 with part number 70233214.

    Timing Gear Cover Gasket Allis Chalmers D17 WC WD WD45 WF 170 175 70233214

    Allis-Chalmers
    $9.75
    70233214
    Timing gear cover gasket for select Allis Chalmers models. Check engine serial details before ordering.0.032" thick with 7 mounting holes and 7/16" mounting hole ID.Part Number: 70233214FitsWD, WD45,...
    Add to Cart
  • A metal side exhaust manifold designed for Allis-Chalmers farm tractors, specifically for the model WC WF, with a 45-degree angle.

    Allis Chalmers WC WF 45 Degree Side Exhaust Manifold

    Allis-Chalmers
    $324.75
    AC-085D
    Allis Chalmers - (Both up to eng. SN 106509; Unstyled & Early Styled): WC, WFPart Number: AC-085DReplaces / Cross Reference70229940, 229940, 70203178, 203178NotesManifold 45 Degree Side Exhaust Gas...
    Add to Cart
  • A black radiador designed for Allis-Chalmers farm tractors, specifically for models WC, WF, WD, WD45, with the part number 70228587.

    Allis Chalmers WC WF WD WD45 Radiator 70228587

    Allis-Chalmers
    $429.50
    70228587
    Radiator for Allis Chalmers Styled WC, WF, WD, and WD45 gas tractors.Bottom tank spout is sheet metal. Clear plastic tubing for overflow. Radiator cap included.Part Number: 70228587 FitsAllis...
    Add to Cart
  • A metal governor rod linkage spring with a coil in the middle, two hooks on either end, used for Allis-Chalmers farm tractors such as WD, WD45, WC, WF, B, C, and IB.

    Governor Rod Linkage Spring - Allis Chalmers WD, WD45, WC, WF, B, C, IB

    Allis-Chalmers
    $14.75
    70203208
    Part Number: 70203208Governor Rod Linkage SpringGovernor rod linkage spring for Allis Chalmers tractors. Serial qualifiers are listed for B, C, and IB models.FitsAllis Chalmers WDAllis Chalmers...
    Add to Cart
  • An aftermarket inline fuel filter with two black rubber hoses, two metal clamps, and a metal housing, designed for Allis-Chalmers farm tractors.

    Inline Fuel Filter 33033

    Allis-Chalmers
    $8.75
    33033
    Part Number: 33033Inline Fuel FilterIn-line fuel filter for use with 3/8" fuel lines. Includes hose and clamps and is Used to help keep rust and dirt out of the carburetor.FitsAllis Chalmers -...
    Add to Cart
  • A sediment bowl filter for Allis-Chalmers farm tractors, featuring a tall bowl assembly with a filter element inside. The filter has a metal body, a glass bowl for sediment collection, and a brass shut-off valve at the side. The image notes that the product is for illustrative purposes and the sediment bowl assembly is not included.

    Sediment Bowl Filter for Tall Bowl Assemblies

    Aftermarket
    $12.25
    DJS3039
    Fuel filter only. Sediment bowl not included. This fits our sediment bowl assembly ACR2406 and also fits replacement glass bowl
    Add to Cart
  • A connecting rod bearing with a 0.030 undersize, designed for Allis-Chalmers farm tractors. The bearing is circular with a split for installation.

    Allis-Chalmers Connecting Rod Bearing 0.030 Undersize

    Allis-Chalmers
    $14.75
    AC-4006D
    Allis Chalmers - D17, WD, WD45, 170, 175, WC, WF0.030" undersize connecting rod bearing sold per journal.Part Number: AC-4006DFitsD17, WD, WD45, 170, 175 (Gas, LP with G201, G226 engines.)WC, WF...
    Add to Cart
  • A set of three engine main bearing shells, with one bearing shell shown from the top and another from the inside, all designed for Allis-Chalmers farm tractors. The bearings are gold-colored with a smooth surface and have cutouts for installation. They are labeled as 0.020 undersize.

    Allis-Chalmers Main Bearing Set 0.020 Undersize

    Allis-Chalmers
    $129.75
    AC-2774D
    Allis Chalmers - WC, WD, WD45, WFUndersized 0.020 main bearing set for G201 and G226 engines with front thrust bearing.Part Number: AC-2774DFitsAllis Chalmers WC, WD, WD45, WFG201 and G226 w/ Front...
    Add to Cart