Same Day Shipping On 99% Of Orders

Allis Chalmers 170 Tractor Parts

About the Allis-Chalmers 170

The Allis-Chalmers 170 was one of the larger tractors in the company's 1960s line. Introduced in 1967 as the One-Seventy, it used a four-cylinder engine, live PTO, hydraulic power assist, and an eight-speed transmission with two-speed power shift.

Early Allis-Chalmers literature calls it the One-Seventy, while later tractors use the numeric 170 marking. The model was available with gasoline or diesel power and was built through 1973, so the tractor year and serial number are useful when matching parts.

Serial Number Reference

Serial number locations: The tractor serial number is on the left front side of the torque housing. The gasoline engine serial number is at the rear left side of the engine block behind the carburetor. The diesel engine serial number is on the top right side of the cylinder block.

The table below shows the beginning tractor serial number for each Model 170 year:

 

1967-1969
Model 170 year Beginning serial number
1967 1,005
1968 2,721
1969 5,374
1970-1971
Model 170 year Beginning serial number
1970 6,369
1971 6,988
1972-1973
Model 170 year Beginning serial number
1972 7,797
1973 8,821

Total production: 9,303 Model 170 tractors; fuel-type production totals were not available.

Allis-Chalmers 170 Paint Reference

For restoration planning, the Allis-Chalmers 170 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers 170 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1961 through 1977 Persian Orange 2 Cream Cream, Aluminum Persian Orange 2 Persian Orange 2

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • A black hydraulic hose with the number 254733 printed on it, designed for Allis-Chalmers farm tractors, not for automobiles.

    Allis-Chalmers Hydraulic Hose for 170 175 210 220

    Allis-Chalmers
    $15.00
    70254733
    Part Number: 70254733Allis-Chalmers Hydraulic HoseHydraulic hose for Allis-Chalmers 170, 175, 210, and 220.Fits170 (SN# 7500 and up) - connects inlet tube to sump cover175 (SN# 2035 and up) -...
    Add to Cart
  • A circular black metal thrust washer for Allis-Chalmers farm tractors, specifically a spindle thrust washer.

    Spindle Thrust Washer for Allis Chalmers Tractors

    Allis-Chalmers
    $7.50
    70218762
    Spindle thrust washer for select Allis Chalmers tractors.Part Number: 70218762FitsWDWD45WD45 DieselD10D12D14D15D19175180185190200D17 (early models with 5 bolt hub)170 (late models)6060 (with 96"...
    Add to Cart
  • A set of five black spark plug wires with gold connectors designed for Allis-Chalmers farm tractors with electronic ignition, along with a single rubber boot insulator.

    Allis-Chalmers Spark Plug Wire Set for Electronic Ignition

    Allis-Chalmers
    $24.75
    AC-4304D
    Spark plug wire set for Allis-Chalmers models with electronic ignition.Part Number: AC-4304DFitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers RCAllis-Chalmers...
    Add to Cart
  • Image of a gasket for Allis-Chalmers 170 and 175 diesel tractors, specifically for the exhaust manifold elbow. The gasket is triangular with a large circular opening in the center and three smaller holes at each corner.

    Allis-Chalmers 170 175 Diesel Exhaust Manifold Elbow Gasket

    Allis-Chalmers
    $14.50
    70251239
    Part Number: 70251239Allis-Chalmers Exhaust Manifold Elbow GasketGasket for Allis-Chalmers 170 and 175 Diesel tractors.Fits170175 DieselReplaces / Cross Reference4223085M170251239251239NotesOEM AGCO...
    Add to Cart
  • A gray gasket with a rectangular shape and rounded edges, featuring multiple circular bolt holes along its perimeter, designed for Allis-Chalmers farm tractors.

    Lift Arm Housing Gasket for Allis Chalmers D17, D19, 170, 175, 180, 185, 190, 200, Early 7000 Red Belly

    Allis-Chalmers
    $39.00
    70237584
    Lift Arm Housing Gasket for Allis Chalmers D17, D19, 170, 175, 180, 185, 190, 200, and Early 7000 Red Belly.Part Number: 70237584FitsAllis Chalmers D17Allis Chalmers D19Allis Chalmers 170Allis...
    Add to Cart
  • A black rubber seal with white embossed lettering that reads "ALLIS-CHALMERS WICO" and "NATIONAL N-." The seal appears to be a governor control rod tach drive seal for Allis Chalmers farm tractors such as WD, WD45, D17, 170, 175.

    Governor Control Rod Tach Drive Seal for Allis Chalmers WD, WD45, D17, 170, 175

    Allis-Chalmers
    $16.75
    70206072
    Governor Control Rod Tach / Tachometer Drive Seal for Allis Chalmers WD, WD45, D17, 170, and 175.Listed as OEM AGCO Brand.Part Number: 70206072FitsAllis Chalmers WDAllis Chalmers WD45Allis Chalmers...
    Add to Cart
  • A pressure plate designed for Allis-Chalmers D17, 170, or 175 farm tractors, featuring an 11-inch diameter and 30 spline configuration.

    Allis Chalmers D17 170 175 Pressure Plate 11" 30 Spline

    Allis-Chalmers
    $465.50
    70242572
    Pressure plate for Allis Chalmers D17, 170, and 175.Part Number: 70242572FitsAllis Chalmers D17 (SN 75001>)Allis Chalmers 170Allis Chalmers 175Replaces / Cross Reference70242572242572Specs11 inches30...
    Add to Cart
  • A set of three main bearing shells for Allis-Chalmers farm tractors, arranged with one shell open to display the bearing surface, and the other two shells closed. The shells are metallic with a smooth bearing surface.

    Allis Chalmers Main Bearing Set 0.030 Undersized WC WD WD45 WF D17 170 175

    Allis-Chalmers
    $148.50
    MS-209P-030
    Allis Chalmers main bearing set, undersized 0.030", sold as a set.Part Number: MS-209P-030FitsAllis Chalmers - WC, WD, WD45, WF, D17, 170, 175Fits G201 and G226 w/ Front Thrust BearingSpecsMain...
    Add to Cart
  • An image of a black rubber valve cover gasket with four small round sealing washers placed on top of it, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Valve Cover Gasket NBR Rubber

    Allis-Chalmers
    $27.75
    AC-315RD
    NBR / rubber valve cover gasket for select Allis Chalmers gas / LP applications.Part Number: AC-315RDFitsAllis Chalmers WCAllis Chalmers WDAllis Chalmers WFAllis Chalmers WD45Allis Chalmers D17Allis...
    Add to Cart
  • A close-up image of a metallic bumper part designed for Allis Chalmers farm tractors, specifically models 170, 175, 180, 185, 190, and 190XT. The part is cylindrical with a central hole and a flange at the base, showing signs of wear and dirt.

    Sheet Metal Bumper for Allis Chalmers 170 175 180 185 190 190XT

    AGCO
    $2.75
    70249403
    Sheet metal bumper for behind the grill / nose cone on select Allis Chalmers tractors.Part Number: 70249403FitsAllis Chalmers 170Allis Chalmers 175Allis Chalmers 180Allis Chalmers 185Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Brake Plate Assembly with Lining for Allis Chalmers D17 170 tractor, featuring a circular metal plate with lined brake segments and a central splined hub.

    Brake Plate Assembly With Lining for Allis Chalmers D17 170

    Allis-Chalmers
    $199.75
    70277327
    Brake plate assembly with lining for select Allis Chalmers tractors. Listed with 20 spline and 6.50" O.D. specifications.Part Number: 70277327FitsAllis Chalmers D17 S/N 42001 & upAllis Chalmers...
    Add to Cart
  • A black, oval-shaped fan belt with small teeth on the inner side, designed for Allis-Chalmers 170/175 Gas farm tractors, product number 70248316.

    Allis-Chalmers 170/175 Gas Fan Belt 70248316

    Allis-Chalmers
    $15.25
    70248316
    Allis-Chalmers Fan BeltPart Number: 70248316This fan belt is listed for select Allis-Chalmers gas tractors and provides a direct replacement option for the models shown below.FitsAllis-Chalmers 170...
    Add to Cart
  • Allis-Chalmers Brake Plate Assembly with Lining, part number 70277326, designed for farm tractors. The image shows a round, metallic brake plate with multiple small components and a central splined hole.

    Allis-Chalmers Brake Plate Assembly with Lining 70277326

    Allis-Chalmers
    $109.75
    70277326
    Brake plate assembly with lining for Allis-Chalmers 170, 180, and 185 models.Part Number: 70277326FitsAllis-Chalmers 170Allis-Chalmers 180Allis-Chalmers 185Replaces / Cross...
    Add to Cart
  • A metal upper brake pin for Allis-Chalmers D17 Series IV, 170, 175, 180, 185 farm tractors.

    Allis-Chalmers D17 Series IV, 170, 175, 180, 185 Upper Brake Pin

    Allis-Chalmers
    $18.75
    70237217
    Upper Brake Pin for Allis-Chalmers tractors.New part identified as 70237217.Part Number: 70237217FitsAllis-Chalmers D17 Series IVAllis-Chalmers 170Allis-Chalmers 175Allis-Chalmers 180Allis-Chalmers...
    Add to Cart
  • Metal lower brake pin for Allis-Chalmers farm tractors, compatible with models D17, 170, 175, 180, 185.

    Allis Chalmers Lower Brake Pin for D17, 170, 175, 180, 185

    Allis-Chalmers
    $19.75
    70237216
    Lower Brake Pin for Allis Chalmers tractors.Fits D17 Series IV, 170, 175, 180, and 185 models.Part Number: 70237216FitsD17 Series IV170175180185NotesNo longer available from AGCO.
    Add to Cart
  • A white amp gauge with black markings, showing a range from 0 to 60 Amperes, used for Allis-Chalmers farm tractors. The gauge has the text "ALLIS-CHALMERS" at the bottom center and "AMPERES" at the top, with a needle pointing to just below 60.

    Allis Chalmers Amp Gauge 60-0-60 70254407

    Allis-Chalmers
    $44.50
    DJS70254407
    Aftermarket 60-0-60 gauge made just like the original ones that came on the tractor when new. Made to give it that original look.Part Number: DJS70254407FitsAllis Chalmers D10Allis Chalmers D12Allis...
    Add to Cart
  • A water temperature gauge for Allis-Chalmers farm tractors. The gauge displays the water temperature with a needle pointing to a position on a dial. The dial has a color-coded section indicating safe (white and green) and warning (red) temperature ranges. The face of the gauge is marked with 'WATER TEMPERATURE' and 'ALLIS-CHALMERS' in the center.

    Allis Chalmers Water Temperature Gauge

    Allis-Chalmers
    $51.50
    DJS70240989
    Aftermarket water temperature gauge made just like the original ones that came on the tractor when new. Made to give it that original look. Part Number: DJS70240989 Fits Allis Chalmers 175...
    Add to Cart
  • Round Allis-Chalmers tractor fuel gauge with a chrome-colored bezel, white dial marked FUEL LEVEL, E, 1/2, and F, a red low-fuel segment, and a black needle pointing near empty.

    Allis Chalmers Fuel Gauge

    Allis-Chalmers
    $51.50
    DJS70240988
    Aftermarket fuel gauge made just like the original ones that came on the tractor when new. Made to give it that original look. Part Number: DJS70240988 Fits Allis Chalmers D21 Allis Chalmers...
    Add to Cart