Same Day Shipping On 99% Of Orders

Allis Chalmers 7080 Tractor Parts

About the Allis-Chalmers 7080

The Allis-Chalmers 7080 was the largest two-wheel-drive tractor in the 7000 Series lineup. Its 7.0-liter six-cylinder diesel, 20-speed partial power-shift transmission, independent PTO, and standard Acousta cab were built for high-volume field work.

The 7080 was produced from 1975 through 1981 and was followed by the 8070 in the 8000 Series.

Serial Number Reference

Serial number locations: The tractor serial number is stamped above the PTO shield.

The table below shows the beginning tractor serial number for each Model 7080 year:

 

1975-1977
Model 7080 year Beginning serial number
1975 1,007
1976 1,572
1977 2,501
1978-1979
Model 7080 year Beginning serial number
1978 3,001
1979 3,268
1980-1981
Model 7080 year Beginning serial number
1980 3,648
1981 3,954

Total production: Unknown.

Allis-Chalmers 7080 Paint Reference

For restoration planning, the Allis-Chalmers 7080 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers 7080 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1978 through 1985 Corporate Orange Cloud White Cloud White, Aluminum Black Semi-Gloss Cloud White roof

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers NBR Rubber Fuel Sending Unit Gasket, black rubber gasket with four bolt holes for fuel tank sealing.

    NBR Rubber Fuel Sending Unit Gasket

    Allis-Chalmers
    $4.25
    AB-3256RD
    NBR Rubber Fuel Sending Unit Gasket for select Allis Chalmers and other tractor models.Use the application and replacement numbers below to confirm fitment.Part Number: AB-3256RDFitsAllis Chalmers:...
    Add to Cart
  • Allis-Chalmers Comfort Classic Vinyl Seat Assembly, black cushioned tractor or machinery seat with armrests.

    Allis Chalmers Comfort Classic Vinyl Seat Assembly

    Allis-Chalmers
    $665.00
    DJS7025
    Allis Chalmers Comfort Classic Seat Assembly (VINYL)Part Number: DJS7025FitsD10, D12, D14, D15, D17, D19, D21170, 175, 180, 185, 190, 190 XT, 190 XT III200, 210, 220, 220 FWA7000, 7010, 7020, 7030,...
    Add to Cart
  • An aftermarket inline fuel filter with two black rubber hoses, two metal clamps, and a metal housing, designed for Allis-Chalmers farm tractors.

    Inline Fuel Filter 33033

    Allis-Chalmers
    $8.75
    33033
    Part Number: 33033Inline Fuel FilterIn-line fuel filter for use with 3/8" fuel lines. Includes hose and clamps and is Used to help keep rust and dirt out of the carburetor.FitsAllis Chalmers -...
    Add to Cart
  • A fuel sending unit for Allis-Chalmers farm tractors, model compatible with 7000 to 7580 series. The assembly includes a long metal arm with a float at one end, a mounting flange, and a separate small component with wiring and hardware for installation.

    AGCO Fuel Sending Unit Allis Chalmers 7000 thru 7580

    AGCO
    $88.50
    79018192
    Fuel sending unit for Allis Chalmers 7000 thru 7580.AGCO brand unit for 6" to 24" tank depth.Part Number: 79018192FitsAllis Chalmers 7000Allis Chalmers 7010Allis Chalmers 7020Allis Chalmers 7030Allis...
    Add to Cart
  • A black curved rubber hose used as a breather valve cover hose for Allis-Chalmers farm tractors.

    Allis-Chalmers Valve Cover Breather Hose 74036094

    Allis-Chalmers
    $33.75
    74036094
    Allis Chalmers - D19, D21, 4W220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070Valve cover breather hose.Part Number: 74036094Replaces / Cross Reference74036094Specs1-1/4" ID37-1/4"...
    Add to Cart
  • A black rubber lower radiator hose with a curved shape, designed for Allis-Chalmers farm tractors. The hose has a textured surface and the number 70268974 printed on it.

    Allis-Chalmers Lower Radiator Hose 70268974

    Allis-Chalmers
    $19.75
    70268974
    Part Number: 70268974Product OverviewLower radiator hose for select Allis-Chalmers tractors.FitsAllis-Chalmers 7080Allis-Chalmers 8050 LateAllis-Chalmers 8070Replaces / Cross Reference70268974268974
    Add to Cart
  • A close-up image of a gold-colored metal stop and bolt designed for Allis-Chalmers farm tractors. The stop has a rectangular, hollowed-out section, and the bolt has a threaded shaft with a hexagonal head.

    Rear Spinout Rim Stop & Bolt for Allis-Chalmers and More

    Allis-Chalmers
    $24.00
    70219456
    Rear spinout rim stop & hex bolt included for parallel drilled rim rails.New part sold under store SKU 70219456.Part Number: 70219456FitsAllis Chalmers - CA, D10, D12, D14, D15, D17, D19, WD, WD45,...
    Add to Cart
  • A metallic, round aftermarket mini Denso alternator pulley with a central hole, designed for use on Allis-Chalmers farm tractors, not for automobiles.

    Mini Denso Alternator Pulley AB-2315D

    Aftermarket
    $39.75
    AB-2315D
    Alternator Pulley Part Number: AB-2315D This alternator pulley is listed for the AB-535D Mini Alternator and select Denso alternators shown below. Review the dimensions before ordering. Fits AB-535D...
    Add to Cart
  • A round gauge panel designed for farm tractors, showing fuel level, water temperature, and engine temperature with labeled icons and color-coded indicators.

    Allis-Chalmers 6000 7000 8000 Series Fuel Gauge Water Temp Temperature Gauge

    Allis-Chalmers
    $159.75
    AC-4479D
    Fuel gauge, water temp, and temperature gauge for Allis-Chalmers 6000, 7000, and 8000 series tractors. Works with a 1 ohm to 88 ohm sending unit.Part Number: AC-4479DFitsAllis Chalmers 6060Allis...
    Add to Cart
  • A cylindrical metal spindle bushing with a silver exterior and a gold-colored interior, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Spindle Bushing 70267222 7010-8070

    Allis-Chalmers
    $27.75
    AC-5371D
    Allis Chalmers lower spindle bushing for select models. Use this listing for the lower bushing only. Part Number: AC-5371D Fits Allis Chalmers 7010 Allis Chalmers 7020 Allis Chalmers 7030 Allis...
    Add to Cart
  • A cylindrical metal spindle bushing with a smooth exterior and a golden interior, designed for Allis-Chalmers farm tractors, specifically for models such as D21, 210, 220 with part numbers 7010-8070.

    Allis Chalmers Spindle Bushing D21 210 220 7010-8070

    Allis-Chalmers
    $19.50
    AC-5365D
    Allis Chalmers spindle bushing for select models. Application varies by tractor model, with upper and lower spindle bushing notes listed below. Part Number: AC-5365D Fits Allis Chalmers D21 Allis...
    Add to Cart
  • A close-up image of an Allis-Chalmers ignition switch with a key inserted, used for farm tractors. The switch is metallic, with a key attached to a small hole.

    Allis Chalmers Ignition Switch Key Switch 7000-7080

    Allis-Chalmers
    $39.75
    AC-4485D
    Allis Chalmers ignition switch key switch for select 7000 series tractors. This switch has 3 positions and includes 2 keys and 1 nut.Part Number: AC-4485DFitsAllis Chalmers 7000Allis Chalmers 7010 up...
    Add to Cart
  • A set of wheel bearing kit parts, including three bearing rings, two roller bearings, and a seal, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Wheel Bearing Kit 7010 7020 7030 7040 7050 7060 7080 8010 8030 8050 8070

    Allis-Chalmers
    $65.00
    WBKAC4
    Wheel bearing kit for Allis Chalmers models 7010 through 8070 as listed.Part Number: WBKAC4FitsAllis Chalmers 7010Allis Chalmers 7020Allis Chalmers 7030Allis Chalmers 7040Allis Chalmers 7050Allis...
    Add to Cart
  • A close-up image of an OEM light switch, specifically designed for Allis-Chalmers farm tractors, including models 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, and 8550.

    OEM Light Switch for Allis Chalmers 6060 6070 6080 7000 7010 7020 7030 7040 7045 7050 7060 7080 7580 8550

    Allis-Chalmers
    $59.95
    AC-4302D
    4 position OEM Indak rotary light switch for select Allis Chalmers tractors.Part Number: AC-4302DFitsAllis Chalmers 6060Allis Chalmers 6070Allis Chalmers 6080Allis Chalmers 7000Allis Chalmers...
    Add to Cart
  • A metallic plunger primer bail assembly for Allis-Chalmers farm tractors, with a knurled cylindrical component and a U-shaped metal wire attached.

    Plunger Primer Bail Assembly Allis Chalmers D15 D21 180 185 190 190XT 190XT III 200 210 220 7000 7010 7020 7030 7040 7045 7050 7060 7080 7580

    Allis-Chalmers
    $57.75
    74050646
    Bail assembly for fuel primer / plunger applications on select Allis Chalmers tractors.Part Number: 74050646FitsAllis Chalmers D15Allis Chalmers D21Allis Chalmers 180Allis Chalmers 185Allis Chalmers...
    Add to Cart
  • A clutch disc designed for Allis-Chalmers farm tractors, featuring four friction pads and a central spline hub, used in various models including 7010, 7020, 7030, 7040, 7050, 7060, 7080, 8010, 8030, 8070, and 4W220.

    Allis Chalmers 12 Inch 4 Pad Clutch Disc 7010 7020 7030 7040 7050 7060 7080 8010 8030 8070 4W220

    Allis-Chalmers
    $216.75
    70269728
    12" 4 pad clutch disc for Allis Chalmers tractors.Part Number: 70269728Fits70107020703070407050706070808010803080704W220Specs12"4 pad1-1/2" hub23 splineReplaces / Cross Reference702
    Add to Cart
  • Allis-Chalmers Alternator with 72 Amp capacity, 3 wires, model number 74916592.

    Allis-Chalmers Alternator 72 Amp 3 Wire 74916592

    Allis-Chalmers
    $215.50
    74916592
    Allis-Chalmers - 6060, 6070, 6080, 8010, 7000, 7010, 7020, 7030, 7040, 7050, 7080 Alternator, 72 amp, 3 wire, with "R" terminal. Part Number:...
    Add to Cart