Same Day Shipping On 99% Of Orders

Allis Chalmers 8030 Tractor Parts

About the Allis-Chalmers 8030

The Allis-Chalmers 8030 was part of the 8000 Series introduced in 1982. The serial reference shows only eight tractors for 1981, serial numbers 1001 through 1008, which were likely pre-production or test tractors built ahead of the 1982 release. Its six-cylinder diesel, independent PTO, hydrostatic power steering, and standard Acousta cab gave it the equipment expected of a modern large row-crop tractor.

The 8030 was available in two- or four-wheel drive, with a high-crop variant also listed. It occupied the middle of the 8000 Series between the 8010 and 8050.

Serial Number Reference

Serial number locations: The tractor serial number appears on a decal on the left side of the frame just ahead of the fuel tank. It is also stamped into the casting at the rear of the tractor, above and to the left of the PTO shaft.

The table below shows the beginning tractor serial number for each Model 8030 year:

 

1981-1982
Model 8030 year Beginning serial number
1981 1,001
1982 1,009
1983-1984
Model 8030 year Beginning serial number
1983 2,093
1984 2,701
1985-1985
Model 8030 year Beginning serial number
1985 3,146

Total production: 2,328 Model 8030 tractors.

Sort By:

Display Type:
Filters
  • Allis-Chalmers NBR Rubber Fuel Sending Unit Gasket, black rubber gasket with four bolt holes for fuel tank sealing.

    NBR Rubber Fuel Sending Unit Gasket

    Allis-Chalmers
    $4.25
    AB-3256RD
    NBR Rubber Fuel Sending Unit Gasket for select Allis Chalmers and other tractor models.Use the application and replacement numbers below to confirm fitment.Part Number: AB-3256RDFitsAllis Chalmers:...
  • An aftermarket inline fuel filter with two black rubber hoses, two metal clamps, and a metal housing, designed for Allis-Chalmers farm tractors.

    Inline Fuel Filter 33033

    Allis-Chalmers
    $8.75
    33033
    Part Number: 33033Inline Fuel FilterIn-line fuel filter for use with 3/8" fuel lines. Includes hose and clamps and is Used to help keep rust and dirt out of the carburetor.FitsAllis Chalmers -...
  • A black curved rubber hose used as a breather valve cover hose for Allis-Chalmers farm tractors.

    Allis-Chalmers Valve Cover Breather Hose 74036094

    Allis-Chalmers
    $33.75
    74036094
    Allis Chalmers - D19, D21, 4W220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070Valve cover breather hose.Part Number: 74036094Replaces / Cross Reference74036094Specs1-1/4" ID37-1/4"...
  • A close-up image of a gold-colored metal stop and bolt designed for Allis-Chalmers farm tractors. The stop has a rectangular, hollowed-out section, and the bolt has a threaded shaft with a hexagonal head.

    Rear Spinout Rim Stop & Bolt for Allis-Chalmers and More

    Allis-Chalmers
    $24.00
    70219456
    Rear spinout rim stop & hex bolt included for parallel drilled rim rails.New part sold under store SKU 70219456.Part Number: 70219456FitsAllis Chalmers - CA, D10, D12, D14, D15, D17, D19, WD, WD45,...
  • A metallic, round aftermarket mini Denso alternator pulley with a central hole, designed for use on Allis-Chalmers farm tractors, not for automobiles.

    Mini Denso Alternator Pulley AB-2315D

    Aftermarket
    $39.75
    AB-2315D
    Alternator Pulley Part Number: AB-2315D This alternator pulley is listed for the AB-535D Mini Alternator and select Denso alternators shown below. Review the dimensions before ordering. Fits AB-535D...
  • A round gauge panel designed for farm tractors, showing fuel level, water temperature, and engine temperature with labeled icons and color-coded indicators.

    Allis-Chalmers 6000 7000 8000 Series Fuel Gauge Water Temp Temperature Gauge

    Allis-Chalmers
    $159.75
    AC-4479D
    Fuel gauge, water temp, and temperature gauge for Allis-Chalmers 6000, 7000, and 8000 series tractors. Works with a 1 ohm to 88 ohm sending unit.Part Number: AC-4479DFitsAllis Chalmers 6060Allis...
  • A black upper radiator hose designed for Allis-Chalmers farm tractors, models 8030, 8050, and 8070. The hose is curved and cylindrical.

    Allis-Chalmers 8030 8050 8070 Upper Radiator Hose

    Allis-Chalmers
    $32.75
    70276095
    Upper radiator hose for Allis-Chalmers tractors with the listed fitment and hose measurements.Part Number: 70276095FitsAllis Chalmers 8030Allis Chalmers 8050 (Lower, Straight, Early)Allis Chalmers...
  • A cylindrical metal spindle bushing with a silver exterior and a gold-colored interior, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Spindle Bushing 70267222 7010-8070

    Allis-Chalmers
    $27.75
    AC-5371D
    Allis Chalmers lower spindle bushing for select models. Use this listing for the lower bushing only. Part Number: AC-5371D Fits Allis Chalmers 7010 Allis Chalmers 7020 Allis Chalmers 7030 Allis...
  • A cylindrical metal spindle bushing with a smooth exterior and a golden interior, designed for Allis-Chalmers farm tractors, specifically for models such as D21, 210, 220 with part numbers 7010-8070.

    Allis Chalmers Spindle Bushing D21 210 220 7010-8070

    Allis-Chalmers
    $19.50
    AC-5365D
    Allis Chalmers spindle bushing for select models. Application varies by tractor model, with upper and lower spindle bushing notes listed below. Part Number: AC-5365D Fits Allis Chalmers D21 Allis...
  • A set of wheel bearing kit parts, including three bearing rings, two roller bearings, and a seal, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Wheel Bearing Kit 7010 7020 7030 7040 7050 7060 7080 8010 8030 8050 8070

    Allis-Chalmers
    $65.00
    WBKAC4
    Wheel bearing kit for Allis Chalmers models 7010 through 8070 as listed.Part Number: WBKAC4FitsAllis Chalmers 7010Allis Chalmers 7020Allis Chalmers 7030Allis Chalmers 7040Allis Chalmers 7050Allis...
  • A clutch disc designed for Allis-Chalmers farm tractors, featuring four friction pads and a central spline hub, used in various models including 7010, 7020, 7030, 7040, 7050, 7060, 7080, 8010, 8030, 8070, and 4W220.

    Allis Chalmers 12 Inch 4 Pad Clutch Disc 7010 7020 7030 7040 7050 7060 7080 8010 8030 8070 4W220

    Allis-Chalmers
    $216.75
    70269728
    12" 4 pad clutch disc for Allis Chalmers tractors.Part Number: 70269728Fits70107020703070407050706070808010803080704W220Specs12"4 pad1-1/2" hub23 splineReplaces / Cross Reference702
  • A grey, circular front wheel hub assembly with eight bolt holes and a central bearing, designed for Allis-Chalmers farm tractors.

    Allis-Chalmers 8 Lug Front Wheel Hub Assembly 70265167

    Allis-Chalmers
    $131.75
    70265167
    Allis-Chalmers - D21, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070Front wheel hub assembly, 8 lug.Part Number:...
  • An Allis-Chalmers thermostat housing gasket, black in color, with a rounded shape and two smaller holes on either side.

    Thermostat Housing Gasket for Allis-Chalmers

    Allis-Chalmers
    $6.75
    74025101
    Thermostat Housing to Block Gasket for Allis-Chalmers equipment. New part.Part Number: 74025101FitsAllis Chalmers - D21, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030,...
  • A metal rim clamp with a bolt, designed for Allis-Chalmers farm tractors, not for automobiles. It is labeled as a Bridle 1 Bolt Spin-out Rim Clamp.

    Bridle 1 Bolt Spin-out Rim Clamp

    Allis-Chalmers
    $18.75
    AB-3865D
    Bridle 1 bolt spin-out rim clamp for the listed tractor applications using 1 bolt spin-out rim clamps.Part Number: AB-3865DFitsAllis Chalmers - D17 (SN 42001 & up), D19, 160, 170, 175, 180, 185, 190,...
  • Set of six silver-colored camshaft bearing bushings for Allis-Chalmers farm tractors, arranged in two rows on a white background.

    Allis-Chalmers Camshaft Bearing (Bushing) Set

    Allis-Chalmers
    $82.00
    ACSH-628S
    Camshaft bearing (bushing) set for listed Allis-Chalmers models. Fits D426 6-Cylinder Diesel Engine applications.Part Number: ACSH-628SFitsAllis Chalmers - D21, 210, 220, 4W-220, 7030, 7040, 7045,...
  • Allis-Chalmers neutral safety starting switch OEM 70248659 for farm tractors, shown as a metal threaded switch with mounting nuts, a rubber boot, and a rounded plunger.

    Neutral Safety Starting Switch OEM 70248659

    Allis-Chalmers
    $34.00
    70248659
    Part Number: 70248659FitsAllis Chalmers - for use as a neutral safety switch: 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 4W220, 4W305, 5040, 5045, 5050, 6040, 6060, 6070, 6080, 7000,...
  • Round brown cork fuel-sending-unit gasket with a large center opening and five smaller mounting holes, for Allis-Chalmers and other farm tractors.

    Cork Fuel Sending Unit Gasket - Allis Chalmers, Case, International, John Deere, Massey Ferguson, Minneapolis Moline

    Allis-Chalmers
    $4.75
    AB-3256D
    Part Number: AB-3256DFitsAllis Chalmers - D21, 170, 175, 180, 185, 190, 190XT, 4W220, 4W305, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070,...
  • Two blue water pump housing and mounting gaskets for Allis-Chalmers farm tractors, shown against a white background.

    Allis Chalmers Water Pump Housing & Mounting Gaskets D21 180 185 190 190XT 190XT III 200 210 220 220 FWA 4W-220 7000 7030 7040 7045 7050 7060 7080 7580 8010 8030 8050 8070 860 Cotton Stripper

    Allis-Chalmers
    $5.00
    74026887
    Water pump housing and mounting gaskets for the Allis Chalmers tractors and AC combines listed below.Condition: NewPart Number: 74026887FitsAllis Chalmers D21Allis Chalmers 180Allis Chalmers 185Allis...