Allis Chalmers C Tractor Parts

Electronic Ignition Conversion Kit for 6V positive ground Allis-Chalmers applications. Replaces points and condenser with a breakerless solid-state ignition system that fits under the stock distributor cap. For Delco distributor numbers 1111411, 1111530,...

New clutch kit for Allis Chalmers B, C, CA, and IB models. Diameter should be measured before ordering.Includes an 8-1/2" pressure plate, 8-1/2" 10 spline spring loaded clutch disc, throw-out bearing, and pilot bearing.Part Number: AC-346DPFitsAllis...

New clutch kit for Allis Chalmers B, C, CA, and IB models. Diameter should be measured before ordering.Includes an 8-1/2" pressure plate, 8-1/2" 10 spline spring loaded clutch disc, throw-out bearing, and pilot bushing.Part Number: AC-346DBFitsAllis...

New clutch kit for Allis Chalmers B, C, CA, and IB models. Diameter should be measured before ordering.Includes an 8-1/2" pressure plate, 8-1/2" 10 spline solid clutch disc, throw-out bearing, and pilot bushing.Part Number: AC-346SDBFitsAllis Chalmers...

Allis Chalmers - B, C, RCPart Number: ACR0082Replaces / Cross ReferenceZenith - S906, 10699NotesComplete Carburetor Repair Kit fits Zenith - S906, 10699.Includes Basic Kit, plus Fuel & Air Adjusting Screws & Jets.

Part Number: 70203208Governor Rod Linkage SpringGovernor rod linkage spring for Allis Chalmers tractors. Serial qualifiers are listed for B, C, and IB models.FitsAllis Chalmers WDAllis Chalmers WD45Allis Chalmers WCAllis Chalmers WFAllis Chalmers B (up...

Part Number: 33033Inline Fuel FilterIn-line fuel filter for use with 3/8" fuel lines. Includes hose and clamps and is Used to help keep rust and dirt out of the carburetor.FitsAllis Chalmers - various modelsAvery - various modelsCase - various...

Part Number: AC-2768DMain Bearing SetAllis Chalmers main bearing set sold as a set of 3. This set is 0.020" undersized and has a main journal size of 2.230".FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers CAAllis Chalmers...

Rear spinout rim stop & hex bolt included for parallel drilled rim rails.New part sold under store SKU 70219456.Part Number: 70219456FitsAllis Chalmers - CA, D10, D12, D14, D15, D17, D19, WD, WD45, 160, 170, 175, 180, 185, 190, 190XT, 190XT Series...

9" pressure plate clutch for Allis-Chalmers B, IB, C, CA, D10, D12, D14, and WF.Part Number: 70228926FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers D10 (UP to 3501)Allis-Chalmers D12 (UP to 3001)Allis-Chalmers...

Alternator Pulley Part Number: AB-2315D This alternator pulley is listed for the AB-535D Mini Alternator and select Denso alternators shown below. Review the dimensions before ordering. Fits AB-535D Mini Alternator Denso 100211-1660 Alternator Denso...

Spark plug wire set for Allis-Chalmers models with electronic ignition.Part Number: AC-4304DFitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers RCAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers D14Allis-Chalmers...

Allis Chalmers standard main bearing set, sold as a set of 3.Part Number: AC-2763DFitsAllis Chalmers - B, IB, C, CA, RCSpecsMain journal: Standard size (2.250")Sold as setNotesMeasure before ordering; cannot be returned if package has been opened

Allis Chalmers main bearing set, 0.010" undersized, sold as a set of 3.Part Number: AC-2766DFitsAllis Chalmers - B, IB, C, CA, RCSpecsMain journal: Undersize size 0.010" (2.240")Sold as setNotesMeasure before ordering; cannot be returned if package has...

Pertronix Ignitor electronic ignition conversion kit for Delco 4-cylinder applications with 12V positive ground. Replaces points and condenser with a breakerless solid-state ignition system that fits under the stock distributor cap. Use this kit for the...

Clutch alignment tool for Allis-Chalmers B, C, CA, IB, D10, D12, D14, and D15. 10 spline.Part Number: 1212-1600FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers D14Allis-Chalmers...

Allis-Chalmers 8 1/2" clutch disc with 4 pads, 1 1/8" hub, and 10 spline.Part Number: 70214320FitsAllis-Chalmers BAllis-Chalmers CAllis-Chalmers CASpecs8 1/2" clutch disc4 pad1 1/8" hub10 spline

Oil Pump Body To Cylinder Block Gasket. New gasket for the listed Allis-Chalmers applications.Part Number: 70277273FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers RCAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers...