Same Day Shipping On 99% Of Orders

Allis Chalmers C Tractor Parts

About the Allis-Chalmers C

Allis-Chalmers built the Model C as a small row-crop tractor for farms that needed more room and capability than the Model B. Introduced in 1940, it used a 125-cubic-inch four-cylinder engine and a simple three-speed transmission. Its compact size and row-crop layout made it useful for cultivating, general farm work, and smaller fields.

The Model C was built at West Allis, Wisconsin, through 1949. The CA followed it in 1950, making the C an important link between the early B and the later compact tractors.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on top of the transmission case, behind the shift lever. The engine serial number is on the rear left-hand side of the engine.

The table below shows the beginning tractor serial number for each Model C year:

 

1940-1943
Model C year Beginning serial number
1940 1
1941 112
1942 12,389
1943 18,782
1944-1946
Model C year Beginning serial number
1944 23,908
1945 30,695
1946 36,378
1947-1949
Model C year Beginning serial number
1947 39,168
1948 51,515
1949 68,281

Total production: 84,020 Model C tractors.

Allis-Chalmers C Paint Reference

For restoration planning, the Allis-Chalmers C is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers C paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Galvanized, Orange 1 Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • A universal 2-position push-pull switch designed for Allis-Chalmers farm tractors, not for automobiles.

    Universal 2 Position Push Pull Switch

    Allis-Chalmers
    $13.50
    DJS398
    Universal 2 position push pull switch for agricultural and light industrial equipment. For ignition switch applications, it can be used only on battery ignition systems.Switch is a 10amp switch with...
    Add to Cart
  • A metallic flexible choke cable with a round black knob at one end, labeled 'CHOKE,' designed for Allis-Chalmers farm tractors.

    Universal Choke Cable 64"

    Allis-Chalmers
    $19.75
    AC-17033019
    Universal Choke Cable with 64" metal sheathed cable length.Part Number: AC-17033019FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousIH / Farmall - Hydro 70, Hydro 86, 300,...
    Add to Cart
  • Two brass fuel line adapter fittings with threaded ends, designed for Allis-Chalmers farm tractors, not made for automobiles.

    Fuel Line Adapter Fitting

    Allis-Chalmers
    $5.00
    AB-4285D
    Fuel Line Adapter Fitting for tractors and equipment using 5/16" fuel line.Part Number: AB-4285DFitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsInternational :...
    Add to Cart
  • A used Allis-Chalmers fan blade with four blades arranged in a cross shape. The blades are rusty, indicating age or use, and there is a tag attached to the center of the fan blade.

    Used Allis-Chalmers Fan Blade for B, C, CA

    Allis-Chalmers
    $20.00
    244
    Used Allis-Chalmers fan blade for B, C, and CA. Part Number: 244Fits Allis-Chalmers BAllis-Chalmers CAllis-Chalmers CA Notes All sales final.No returns accepted on used items.Ordering NotesUsed...
    Add to Cart
  • A rusty, used Allis-Chalmers base oil filter assembly with a long, slender bolt attached, lying on a plain surface. The image highlights the worn and aged condition of the part.

    Used Allis Chalmers Base Oil Filter Assembly ( )

    Allis-Chalmers
    $10.00
    230
    Used Allis Chalmers base oil filter assembly (230) with missing stand pipe.We have new stand pipes available see part # KI1189.Part Number: 230FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers...
    Add to Cart
  • A gasket for Allis-Chalmers farm tractors, rectangular in shape with rounded corners and four holes, one at each corner.

    Hydraulic Pump Opening Cover Gasket for Allis-Chalmers B, C, IB

    Allis-Chalmers
    $8.50
    70211400
    Part Number: 70211400Allis-Chalmers Hydraulic Pump Opening Cover GasketHydraulic pump opening cover gasket / pump body to reservoir for Allis-Chalmers B, C, and IB models.FitsAllis-Chalmers...
    Add to Cart
  • A gasket designed for the back housing to transmission of Allis-Chalmers farm tractors. It is a flat, irregularly rounded shape with multiple bolt holes around the perimeter.

    Back Housing to Transmission Gasket

    Allis-Chalmers
    $14.25
    70225385
    Part Number: 70225385Back Housing to Transmission GasketBack housing to transmission gasket for listed Allis-Chalmers tractors.FitsAllis-Chalmers CAAllis-Chalmers BAllis-Chalmers CAllis-Chalmers...
    Add to Cart
  • An Allis-Chalmers universal 12V LED fender and cab warning light in amber and red colors, designed for farm tractors, with wiring attached for connection.

    Universal 12V LED Fender & Cab Warning Light Amber / Red

    Allis-Chalmers
    $59.75
    AB-3538D
    Universal 12V LED fender and cab warning light with amber and red diodes.Includes mounting stud with nut and washers.Part Number: AB-3538DFitsAllis-Chalmers - various modelsCase - various...
    Add to Cart
  • Allis-Chalmers Electronic Cutout Relay for Allis-Chalmers B C CA WD45, mounted on a metallic bracket with two nuts on top, labeled with technical specifications.

    Electronic Cutout Relay for Allis-Chalmers B C CA WD45

    Allis-Chalmers
    $32.00
    DJS1002
    Electronic cutout relay for Allis-Chalmers B, C, CA, IB, IU, M, RC, U, UC, WC, WD, WD45, and WF models.25 amp relay works with 6, 12, or 24 volts and positive or negative ground.Part Number:...
    Add to Cart
  • A metallic cylindrical tube with knurled grip at one end and a small hole drilled near the end, designed for Allis-Chalmers farm tractors, product number 70203899.

    Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899

    Allis-Chalmers
    $19.75
    KI1189
    Allis-Chalmers oil filter tube element stand pipe for the listed Allis-Chalmers and AC Misc. applications.Part Number: KI1189FitsAllis Chalmers - G, B, C, CA, IB, RC, WC, WF, WD, WD45, D10, D12, D14,...
    Add to Cart
  • A kit containing pistons, sleeves, rings, pins, and various gaskets designed for Allis-Chalmers farm tractors such as models B, C, CA, IB, and RC.

    Pistons, Sleeves and Rings Kit for Allis-Chalmers B, C, CA, IB, RC

    Allis-Chalmers
    $425.00
    ACR2326
    Part Number: ACR2326FitsAllis-Chalmers BAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers IBAllis-Chalmers RCSpecs3-7/16 over boreKit includes flat top pistons, sleeves, O-rings, piston rings, and pins
    Add to Cart
  • Allis-Chalmers Persian Orange #1 Emblem Allis Chalmers Steering Wheel and Front Nose Emblem

    Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose

    Allis-Chalmers
    $34.00
    A9900
    Persian Orange #1 Emblem for Allis-Chalmers steering wheel and front nose applications.Die cast, chromed, painted Persian #1 background.Part Number: A9900FitsAllis Chalmers - ED40, D10, D12, D14,...
    Add to Cart
  • Heavy Duty 4 Button 9" Spring Loaded Clutch Disc for Allis-Chalmers farm tractors, specifically for models B, C, CA, D10, D12, D14, D15.

    Heavy Duty 4 Button 9" Spring Loaded Clutch Disc for Allis-Chalmers B, C, CA, D10, D12, D14, D15

    Allis-Chalmers
    $220.75
    70253187
    Heavy Duty 4 Button 9" Spring Loaded Clutch DiscFor Allis-Chalmers models listed below. Includes a 10 spline, 1-1/8" spline diameter.Part Number: 70253187FitsAllis Chalmers - B, IB, C, CA, D10, D12,...
    Add to Cart
  • Allis-Chalmers Deluxe Steering Wheel Spinner, a tractor accessory designed to be attached to farm tractors, not automobiles. It features a textured, ergonomic knob with a mounting base.

    Deluxe Steering Wheel Spinner

    Allis-Chalmers
    $17.75
    WSDX1
    Deluxe Steering Wheel Spinner for various tractor models.Part Number: WSDX1FitsAllis Chalmers - VariousAvery - VariousCase - VariousCockshutt - VariousFord - VariousIH / Farmall - VariousJohn Deere -...
    Add to Cart
  • A brass bushing for Allis-Chalmers farm tractors, specifically the Front Governor Shaft Bushing for models B, C, CA, D10, D12, D14, D15.

    Allis-Chalmers Front Governor Shaft Bushing B C CA D10 D12 D14 D15

    Allis-Chalmers
    $14.75
    AC-3739D
    Front Governor Shaft Bushing for Allis-Chalmers tractors and combines.Part Number: AC-3739DFitsAll the following gas and LP tractors: B, C, CA, D10, D12, D14, D15, D272, IB, RCAllis Chalmers Combines...
    Add to Cart
  • A close-up image of a gold-colored metal bushing, identified as a governor gear bushing for Allis-Chalmers farm tractors, specifically models B, C, CA, D10, D12, D14, D15.

    Allis-Chalmers Governor Gear Bushing B C CA D10 D12 D14 D15

    Allis-Chalmers
    $19.75
    AC-3733D
    Governor Gear Bushing for Allis-Chalmers tractors and combines.Part Number: AC-3733DFitsAll gas and LP tractors: B, C, CA, IB, RC, D10, D12, D14, D15, D272Allis Chalmers Combines - 60, 60A, 60H, 66,...
    Add to Cart
  • Used fan blade for Allis-Chalmers B, C, CA farm tractors. The fan blade is made of wood and has four blades arranged in an 'X' shape with a hole in the center for mounting.

    Used Fan Blade for Allis-Chalmers B, C, CA

    Allis-Chalmers
    $25.00
    145
    Used fan blade for Allis-Chalmers B, C, and CA. Part Number: 145Fits Allis-Chalmers BAllis-Chalmers CAllis-Chalmers CA Notes All sales final.No returns accepted on used items.Ordering NotesUsed...
    Add to Cart
  • Allis-Chalmers Spring Loaded Clutch Disc with an 8-1/2 inch diameter. The disc features several coil springs and a central spline for attachment.

    Allis-Chalmers Spring Loaded Clutch Disc 8-1/2 in.

    Allis-Chalmers
    $97.50
    70226730
    New Spring Loaded Clutch Disc for Allis-Chalmers tractors.Part Number: 70226730FitsAllis Chalmers - B, C, CA, IB, B125Replaces / Cross Reference70226730226730Specs8-1/2"10 spline1-1/8" spline diameter
    Add to Cart