Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • A roll of tan 1½-inch fuel tank webbing with a short length unrolled.

    Fuel Tank Webbing - Tan 1-1/2" - Price Per Foot

    Allis-Chalmers
    $4.35
    3531T52
    Tan fuel tank webbing for tractors using webbed insulation between fuel tank mounts and sheet metal parts.Part Number: 3531T52FitsAllis-ChalmersCaseWhite /OliverCockshutFordInternational /...
  • Brown cork base-mount oil filter gasket for an Allis-Chalmers farm tractor, with two round bolt holes and an elongated center opening.

    Allis Chalmers Base Mount Oil Filter Gasket 70233228

    Allis-Chalmers
    $5.75
    70233228
    Base mount oil filter gasket for the listed Allis-Chalmers models below.Replacement numbers provided are 70233228 and 233228.Part Number: 70233228FitsWCWDWD45D17D10D12D14BCCAReplaces / Cross...
  • Round brass mesh sediment bowl screen for an Allis-Chalmers farm tractor, with a circular opening in the center.

    Brass Sediment Bowl Screen

    Allis-Chalmers
    $3.75
    AB-229D
    Brass sediment bowl screen for listed tractors and combines.Part Number: AB-229DFitsAllis Chalmers - 190XT, B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, I40, I400, I60, I600, IB, RC, U, UC, WC,...
  • Round Allis-Chalmers tractor ammeter with a white face, chrome-colored bezel, and a scale from 30 amperes discharge through zero to 30 amperes charge; the needle points near zero.

    Allis Chalmers Amp Gauge

    Allis-Chalmers
    $29.75
    AC-258D
    Allis Chalmers amp gauge with a chrome bezel and restoration quality finish.Fits the Allis Chalmers models listed below.Part Number: AC-258DFitsAllis Chalmers: B, C, CA, G, WC, WD, WD45, WD45D, WF,...
  • Allis-Chalmers PTO oil seal, part 70241779, with a dark rubber inner lip and metal outer casing, shown against a white background.

    Allis Chalmers PTO Oil Seal 1-3/8" 70241779

    Allis-Chalmers
    $11.95
    70241779
    Allis Chalmers PTO oil seal with 1-3/8" size for listed tractor and lift shaft applications.Part Number: 70241779FitsIBBCCAD10D12D14D15D17D19170175180185190190XT190XT III200
  • Roll of black 2-inch fuel tank webbing for Allis-Chalmers farm tractors, with a short length unrolled.

    Allis-Chalmers Fuel Tank Webbing - Black 2"

    Allis-Chalmers
    $2.75
    351T84
    Black fuel tank webbing sold per foot. Fits tractors using webbed insulation between fuel tank mounts and sheet metal parts.Part Number: 351T84FitsAllis Chalmers: variousCase: Fits various...
  • Round, shiny metal fuel cap for farm tractors, with a brass-toned outer dome and a silver center label reading “WARNING: FUEL SPRAY CAN CAUSE INJURY. REMOVE SLOWLY.”

    Fuel Cap for Allis-Chalmers, Case, Ford, JD, and Massey

    Allis-Chalmers
    $9.75
    MH-043D
    Vented fuel tank cap with an included gasket and zinc finish for select tractors and industrial equipment.Part Number: MH-043DSpecificationsOutside diameter: 2.875 in. (2⅞ in.)Overall tab length: 1...
  • Allis-Chalmers Universal Tie Rod Boot - AB-370D, black rubber protective cover for tie rods in vehicle steering systems.

    Universal Tie Rod Boot AB-370D

    Allis-Chalmers
    $4.95
    AB-370D
    Universal Tie Rod Boot AB-370DNew universal tie rod boot with the listed dimensions below. Use with care to confirm fitment against your application before ordering.FitsListed fitment...
  • Allis-Chalmers governor rod linkage spring for farm tractors, with a coiled center and long wire hooks at both ends, shown on a white background.

    Allis Chalmers Governor Rod Linkage Spring B IB C CA D10 D12 D14 D15 RC

    Allis-Chalmers
    $11.75
    AC-304D
    Governor rod linkage spring for Allis Chalmers tractors and equipment. For distributor or magneto ignition.Part Number: AC-304DFitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers...
  • Black seamless ring-shaped headlight gasket for an Allis-Chalmers farm tractor, shown against a white background.

    Headlight Seamless Gasket AB-560D

    Allis-Chalmers
    $4.95
    AB-560D
    Headlight Seamless GasketPart Number: AB-560DSeamless black rubber headlight gasket for listed tractor models. This modern one-piece version is a continuous piece with no staples.FitsAllis-Chalmers:...
  • Black 12-volt ignition coil for an Allis-Chalmers farm tractor, with a built-in resistor, metal mounting band, and electrical terminals on top. The label says to use without an external resistor.

    12 Volt Coil with Internal Resistor

    Allis-Chalmers
    $24.75
    AB-509D
    AB-509D is an oil-filled, barrel-style 12 volt distributor ignition coil with internal resistance, a 2-3/16" barrel outside diameter, and an included mounting bracket. It features 3.1 ohms primary...
  • Eight bronze cylindrical seat bushings arranged in two rows on a white background, for Allis-Chalmers farm tractors.

    Allis Chalmers Bronze Seat Bushings Set 70227910 227910

    Allis-Chalmers
    $30.75
    70227910
    Set of 8 bronze seat bushings for Allis Chalmers tractors.Sold under part number 70227910.Part Number: 70227910FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis...
  • Close-up of a chrome-rimmed Allis-Chalmers oil pressure gauge for D10, D12, D14, D15, and D17 farm tractors, with a white face, black needle, and “NORMAL” range marking.

    Allis Chalmers Oil Pressure Gauge D10 D12 D14 D15 D17

    Allis-Chalmers
    $31.75
    AC-160D
    Allis Chalmers oil pressure gauge for the applications listed below. The gauge has 0 to 30 PSI range, 1/8" male pipe threads, a chrome bezel, and "Allis Chalmers" on the face.Part Number:...
  • Round Allis-Chalmers traction booster gauge for a farm tractor, with a silver-colored bezel, white face, black needle, and curved scale markings.

    Traction Booster Gauge for Allis-Chalmers

    Allis-Chalmers
    $108.75
    AC-124D
    Working Traction Booster Gauge for Allis-Chalmers tractors. This gauge is listed as fully functional and is intended for the models shown below.Part Number: AC-124DFitsAllis-Chalmers CAAllis-Chalmers...
  • A silver cylindrical front spindle bushing for an Allis-Chalmers farm tractor, with a bronze-colored inner surface and a vertical split down one side.

    Allis Chalmers Front Spindle Bushing 70211743

    Allis-Chalmers
    $14.25
    70211743
    Front spindle bushing for Allis Chalmers applications listed below.Part Number: 70211743FitsWDWD45D10D12 High CropD14D15D17D19170175180185190190XT200Notes4 used per tractorSold individually<
  • Metal Allis-Chalmers farm tractor ignition key switch with several flat electrical terminals and two keys attached on a ring, shown against a white background.

    Allis Chalmers Ignition Switch Key Switch

    Allis-Chalmers
    $27.75
    AC-292D
    Ignition switch key switch for select Allis Chalmers tractors.OEM style key switch with 5 spade terminals, 3-position switch, drain hole, 2 keys, 1 nut, and 1 lock washer. Threaded stem size measures...
  • Round brown-and-black rubberized cork gasket ring for an Allis-Chalmers farm tractor fuel cap or radiator cap, shown against a white background.

    Rubberized Cork Gasket for Fuel Cap or Radiator Cap

    Allis-Chalmers
    $2.00
    MH-043GKD
    Rubberized cork gasket for fuel cap or radiator cap use on listed tractors. Size is 2-5/8" OD and 1-1/2" ID.Part Number: MH-043GKDFitsAllis Chalmers: B, C, CA, D10, D12, D14, D15, D17, D19, G, I40,...
  • Allis Chalmers Tie Rod Boot, a black rubber component designed for Allis Chalmers B, IB, C, CA, D10, D12 tractor models, showcasing a conical shape with a circular opening at the top.

    Allis-Chalmers Tie Rod Boot AB-368D

    Allis-Chalmers
    $4.95
    AB-368D
    Allis-Chalmers Tie Rod Boot AB-368DThis tie rod boot is listed for Allis-Chalmers B, IB, C, CA, D10, and D12 tractors. It is a black rubber boot with the dimensions shown below.FitsAllis Chalmers: B,...