Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

1959-1961

Model D10 yearBeginning serial number
1959 - Series I1,001
1960 - Series I1,950
1961 - Series I2,801

1962-1964

Model D10 yearBeginning serial number
1962 - Series I4,511
1963 - Series II6,801
1964 - Series II7,675
1964 - Series III9,001

1965-1968

Model D10 yearBeginning serial number
1965 - Series III9,204
1966 - Series III9,486
1967 - Series III9,795
1968 - Series III9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Allis Chalmers Hydraulic Lift Cylinder Packing Kit 70222677

    Allis Chalmers Hydraulic Lift Cylinder Packing Kit 70222677

    Allis-Chalmers
    $24.95
    AC-3464D
    5-piece hydraulic lift cylinder packing kit for 1 cylinder.For select Allis-Chalmers tractors and the G tractor front hydraulic ram.Part Number: AC-3464DFitsB, C (using 1 single 222677 hydraulic lift cylinder with 1.250" O.D. ram)CAD10 (up to 3501 with...
  • Allis-Chalmers Oil Bath Air Cleaner Filter Element, black fibrous cylindrical filter for industrial machinery.

    Oil Bath Air Cleaner Filter Element for Allis-Chalmers ABC422D

    Allis-Chalmers
    $13.75
    AB-422D
    Oil bath air cleaner filter element for replacing the mesh in existing oil bath air cleaners. Approx. 3" wide x 78" long per bag. Uses 2 bags for utility tractors on all brands. Part Number: AB-422D Fits Allis-Chalmers: B, C, CA, D10, D12, D14 - usually...
  • Allis-Chalmers Ignition Tune-Up Kit W/ Rotor (Delco Distributor), automotive ignition components including rotor, condenser, and mounting hardware.

    Ignition Tune-Up Kit W/ Rotor for Delco Distributor ACR1932

    Allis-Chalmers
    $13.75
    ACR1932
    Ignition Tune-Up Kit W/ Rotor for Delco DistributorThe Ignition Tune-Up Kit W/ Rotor (For Delco) - ACR1932 includes a point set, a vibration-resistant condenser, and a rotor button.It is made for Delco-Remy distributors with clip-held caps and is not for...
  • Allis-Chalmers Allis Chalmers Lever Knob G CA WD WD45 D10 D12 D14 D15 D17 180 185 190 190XT 200 210 220

    Allis Chalmers Lever Knob G CA WD WD45 D10 D12 D14 D15 D17 180 185 190 190XT 200 210 220

    Allis-Chalmers
    $7.75
    AC-184D
    Allis Chalmers lever knob for hydraulic lever, snap coupler lever, drawbar coupler lever, and seat base applications.Part Number: AC-184DFitsHydraulic Lever Knob: CA, G, D17Snap Coupler Lever Knob: D10, D12, D14, D15Drawbar Coupler Lever Knob: WD, WD45,...
  • Allis-Chalmers Fuel Tank Webbing - Tan 2 inch, coiled webbing strap for fuel tank applications, priced per foot.

    Fuel Tank Webbing - Tan 2" - Price Per Foot

    Allis-Chalmers
    $5.65
    3531T53
    Fuel tank webbing for tractors using webbed insulation between the fuel tank mounts and sheet metal parts. Sold by the foot.Part Number: 3531T53FitsAllis-Chalmers - various modelsCase - various modelsCockshutt - various modelsFord - various...
  • Allis-Chalmers Hose Clamp - 1-5/8" OD AB-492D, an adjustable metal hose clamp with a screw mechanism for securing hoses.

    Hose Clamp - 1-5/8" OD

    Allis-Chalmers
    $3.95
    AB-492D
    Hose clamp for 1-5/8" OD applications. Fits select Allis-Chalmers and Ford tractor models listed below.Part Number: AB-492DFitsAllis Chalmers: Upper and/or lower radiator hose clamp on B, IB, C, CA, D10, D12, D14, RC; air cleaner hose clamp on G...
  • Allis-Chalmers Hose Clamp 1-3/4" to 2", metal hose clamp with adjustable screw mechanism for securing hoses.

    Hose Clamp 1-3/4" to 2"

    Allis-Chalmers
    $4.00
    FD-258D
    Hose clamp for 1-3/4" OD to 2" OD hoses. Fits select Allis-Chalmers, Ford, Case, Cockshutt, and Massey Ferguson applications listed below. Part Number: FD-258D Fits Allis Chalmers: Air cleaner hose clamp on B, C, CA, RC, WC, WD, D10, D12; radiator hose...
  • Allis-Chalmers Radiator Cap Allis Chalmers Case

    Allis-Chalmers Case Radiator Cap

    Allis-Chalmers
    $24.75
    AC-209D
    Chrome-plated radiator cap for select Allis-Chalmers and Case tractors and equipment. For pressurized systems and listed for the applications below.Part Number: AC-209DFitsAllis Chalmers - CA, D10, D12, D14, D15, D17, D19, D21, G, I40, I400, I60, WD,...
  • Allis-Chalmers Distributor Cap Delco, black ignition distributor cap with five brass terminals.

    Allis-Chalmers Distributor Cap Delco ACR1944

    Allis-Chalmers
    $18.75
    ACR1944
    New Delco distributor cap for Allis-Chalmers and other tractors using clip-held Delco conversion distributors. Key part number: ACR1944. Replacement numbers: Allis Chalmers 225733; Delco 811735; Case 811735; Cockshutt MA0595; Massey Ferguson 1750411M91;...
  • Allis-Chalmers Rivet, Allis Chalmers Snap Couplers - DJS313

    Allis Chalmers Snap Coupler Rivet

    Allis-Chalmers
    $0.65
    DJS313
    Rivet for Allis-Chalmers Snap Couplers. Used to attach springs and sold individually.Part Number: DJS313FitsAllis-Chalmers Snap Coupler applicationsNotesSold individually.Used to attach springs.Item # DJS313.Ordering NotesCheck mounting location,...
  • Allis-Chalmers Plastic Sediment Bowl Screen

    Plastic Sediment Bowl Screen

    Allis-Chalmers
    $4.75
    AB-534D
    Plastic sediment bowl screen for Allis-Chalmers and other tractor applications. Sold individually.Part Number: AB-534DFitsAllis-Chalmers - 190XT, B, C, CA, G, D10, D12, D14, D15, D17, D19, D21, IB, RC, U, UC, WC, WD, WD45, WD45 (Diesel), WF, 170, 175,...
  • Allis-Chalmers Fuel Tank Webbing - Black 1-1/2", coiled black webbing material for fuel tank security or repair.

    Allis-Chalmers Fuel Tank Webbing - Black 1-1/2"

    Allis-Chalmers
    $2.40
    3510T83
    Black fuel tank webbing sold per foot. Fits tractors using webbed insulation between fuel tank mounts and sheet metal parts.Part Number: 3510T83FitsAllis Chalmers: variousCase: variousCockshutt: variousFord: variousInternational: variousJohn Deere:...
  • Allis-Chalmers Fuse Holder, black cylindrical fuse holder with rotating switch marked 'FUSE' for circuit protection.

    Fuse Holder 20 Amp

    Allis-Chalmers
    $12.75
    AB-389D
    20 amp fuse holder for 3AG type fuses. Fits a 1/2" chassis hole and uses a nut for mounting.Part Number: AB-389DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 180, 185, 190, 190XT, 200, 210, 220.Case: 430, 530, 630, 730, 830, 930, 1030, 770,...
  • Allis-Chalmers Allis Chalmers Spark Plug Wiring Set Straight Boots AC-287D, black ignition wire set with straight boots for spark plugs.

    Allis Chalmers Spark Plug Wiring Set Straight Boots AC-287D

    Allis-Chalmers
    $22.75
    AC-287D
    Allis Chalmers Spark Plug Wiring Set with Straight BootsPre-assembled wiring set with waterproof neoprene and a copper core with aluminum coating to help prevent corrosion.FitsAllis Chalmers: B, C, CA, D10, D12, D14, D15, D17, I40, I400, I60, IB, RC, WC,...
  • Allis-Chalmers Temperature Gauge D10 D12 D14 D15 D17 D19 WD45 Diesel, round water temperature gauge with black wiring and a brass probe for tractor engines.

    Allis-Chalmers Temperature Gauge D10 D12 D14 D15 D17 D19 WD45 Diesel

    Allis-Chalmers
    $49.75
    AC-260D
    Part Number: AC-260DAllis-Chalmers Temperature GaugeThis Allis-Chalmers temperature gauge is for WD45 Diesel, D10, D12, D14, D15, D17, and D19 models. It includes an Allis-Chalmers logo and a 70" lead.FitsAllis-Chalmers: WD45 Diesel, D10, D12, D14,...
  • Allis-Chalmers Allis Chalmers Bull Gear Pan Gasket Final Drive B C CA D10 D12 D14 D15 233186 70233186

    Allis Chalmers Bull Gear Pan Gasket Final Drive B C CA D10 D12 D14 D15

    Allis-Chalmers
    $15.75
    70233186
    Bull gear pan gasket for final drive applications on Allis Chalmers tractors and equipment.Sold under part number 70233186.Part Number: 70233186FitsAllis Chalmers BAllis Chalmers CAllis Chalmers CAAllis Chalmers D10Allis Chalmers D12Allis Chalmers...
  • Allis-Chalmers Snap Coupler Latch Spring 70235881, gold-colored coiled metal latch spring with loop ends.

    Allis-Chalmers Snap Coupler Latch Spring 70235881

    Allis-Chalmers
    $8.75
    AC-269D
    Allis Chalmers snap coupler latch spring for the models listed below.3-1/4" overall length. Sold individually. 4 used per tractor. CA used a different spring that is no longer available, but this spring will work fine.Part Number:...
  • Allis-Chalmers Fuel Tank Webbing - Tan 1-1/2 inch, priced per foot, shown as a roll of tan webbing material for fuel tanks.

    Fuel Tank Webbing - Tan 1-1/2" - Price Per Foot

    Allis-Chalmers
    $4.35
    3531T52
    Tan fuel tank webbing for tractors using webbed insulation between fuel tank mounts and sheet metal parts.Part Number: 3531T52FitsAllis-ChalmersCaseWhite /OliverCockshutFordInternational / FarmallJohn DeereMassey Ferguson / HarrisMinneapolis Moline...