Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers MANIFOLD GASKET Allis Chalmers D10 D12 D14 D15

    Allis Chalmers D10 D12 D14 D15 Manifold Gasket

    Allis-Chalmers
    $9.75
    AC-003GKD
    Manifold gasket for the listed Allis-Chalmers and industrial models.Part Number: AC-003GKDFitsAllis Chalmers D10 Gas (up to sn 9001)Allis Chalmers D12 Gas (up to sn 9001)Allis Chalmers D14 Gas (up to...
    Add to Cart
  • Allis-Chalmers Universal 2 Position Push Pull - Ignition - Light Switch - SSW2809

    Universal 2 Position Push Pull Ignition Light Switch

    Allis-Chalmers
    $7.50
    SSW2809
    Universal 2 position push/pull switch for ignition or light use. It is non-fused and includes a plastic knob. Part Number: SSW2809 Fits Allis Chalmers - Various Case - Various Cockshutt -...
    Add to Cart
  • Allis-Chalmers 4409X Sealed Beam Combination Rear Light Bulb 12V

    4409X Sealed Beam Combination Rear Light Bulb 12V

    Allis-Chalmers
    $20.00
    IH-899D
    4-1/2" diameter sealed beam combination rear light bulb for 12V systems. Double contact.Part Number: IH-899DFitsAllis Chalmers: D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200,...
    Add to Cart
  • Allis-Chalmers Orange and White Tractor Seat Pad Cushion 19"

    Orange and White Tractor Seat Pad Cushion 19"

    Allis-Chalmers
    $39.50
    YF30WO
    This orange and white tractor seat pad cushion is for tractors with a round pan seat. It fits a 19" to 21" seat pan side to side and uses a drawstring attachment.Part Number: YF30WOFitsAllis Chalmers...
    Add to Cart
  • Allis-Chalmers Front Wheel Bearing Kit AC-1793D, image of metal bearing rings, rollers, a black rubber seal, and a black felt pad arranged on a white background.

    Allis Chalmers Front Wheel Bearing Kit AC-1793D

    Allis-Chalmers
    $65.75
    AC-1793D
    Allis Chalmers Front Wheel Bearing KitPart number: AC-1793DFront wheel bearing kit for Allis Chalmers tractors with a 5 bolt front hub. Sold individually; 2 used per tractor.FitsWC, WD, WD45, RC (5...
    Add to Cart
  • Allis-Chalmers Allis Chalmers B C CA D10 D12 Fuel Line Steel

    Fuel Line Steel for Allis Chalmers B, C, CA, D10, D12

    Allis-Chalmers
    $32.75
    AC-1974D
    Steel fuel line for select Allis-Chalmers tractors.Part Number: AC-1974DFitsAllis Chalmers: B, IB, C, CA, D10, D12Replaces / Cross Reference702072787021547870243108Specs13-1/8" O/A length1/4" tube O...
    Add to Cart
  • A metallic cylindrical tube with knurled grip at one end and a small hole drilled near the end, designed for Allis-Chalmers farm tractors, product number 70203899.

    Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899

    Allis-Chalmers
    $19.75
    KI1189
    Allis-Chalmers oil filter tube element stand pipe for the listed Allis-Chalmers and AC Misc. applications.Part Number: KI1189FitsAllis Chalmers - G, B, C, CA, IB, RC, WC, WF, WD, WD45, D10, D12, D14,...
    Add to Cart
  • Allis-Chalmers Thumb Screw for Grille Screen 3/8"-16 - 97008A816

    Thumb Screw for Grille Screen 3/8"-16

    Allis-Chalmers
    $2.25
    97008A816
    Thumb screw for grille screens on Allis Chalmers D-Series tractors.Used where the thread hole has been enlarged. Oversize 3/8" - 16.Part Number: 97008A816FitsAllis Chalmers D10Allis Chalmers D12Allis...
    Add to Cart
  • Pertronix Electronic Ignition Conversion Kit 12V Allis Chalmers B IB C CA D10 D12 D14 D15 D17 G WC WD WD45 WF 12V Negative Ground

    Electronic Ignition Conversion Kit 12V for Allis Chalmers B, IB, C, CA, D10, D12, D14, D15, D17, G, WC, WD, WD45, WF

    Pertronix
    $191.50
    ACR3189
    Ignitor Delco fits 4-cylinder applications with 12 volt negative ground. This electronic ignition conversion kit replaces points and condenser with a breakerless solid state system. It fits entirely...
    Add to Cart
  • Allis-Chalmers Seat Adjustment Bolt, metal bolt with a wing nut at one end and a rounded head at the other for seat positioning adjustment.

    Allis Chalmers Seat Adjustment Bolt

    Allis-Chalmers
    $9.00
    SEAT002
    Allis Chalmers seat adjustment bolt with listed replacements for the bolt and wing nut.Part Number: SEAT002FitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200,...
    Add to Cart
  • Allis-Chalmers BRAKE SHOE LINING SET | Allis Chalmers G D10 D12 D14 D15

    Allis-Chalmers Brake Shoe Lining Set G D10 D12 D14 D15 ACR3538

    Allis-Chalmers
    $25.75
    ACR3538
    Allis-Chalmers Brake Shoe Lining SetFor Allis-Chalmers G, D10, D12, D14, and D15 up to SN 9000. Includes 2 linings with rivets for 1 wheel only.FitsAllis-Chalmers G up to SN 9000Allis-Chalmers D10 up...
    Add to Cart
  • Allis-Chalmers Economy Zenith Carburetor Repair Kit, image shows gaskets, screws, seals, and other parts for Allis Chalmers WC, WD, WF, B, C, CA, D10, D12 RC tractors.

    Economy Zenith Carburetor Repair Kit for Multiple Tractor Brands

    Allis-Chalmers
    $27.75
    AB-1346D
    Part Number: AB-1346DEconomy Zenith Carburetor Repair Kit Economy repair kit for the specified Zenith replacement carburetor applications listed below. Important: Some applications may vary within...
    Add to Cart
  • Allis-Chalmers Spark Plugs (Set of 4) - AL295D, close-up of a single spark plug showing its white ceramic insulator and black metal threading.

    Allis-Chalmers Spark Plugs Set of 4 AL295D

    Allis-Chalmers
    $23.00
    AL295D
    OverviewSet of 4 spark plugs for the listed tractor applications. Part Number: AL295D.FitsAllis Chalmers: B, C, CA, D10, D12, D14, D15 (Early), D17 (To Sn# 75000), G, IB, RC, WC, WD, WF, Crawler:...
    Add to Cart
  • Allis-Chalmers New Water Pump Allis Chalmers B IB C CA RC D10 D12 D14

    Allis-Chalmers Water Pump B C CA D10 D12 D14

    Allis-Chalmers
    $119.50
    AC-227D
    New water pump for Allis-Chalmers tractors. Fits B, IB, C, CA, RC, D10, D12, and D14.The pump has a 3/8" NPT bypass hole which can be plugged if needed.Part Number: AC-227DFitsAllis-Chalmers...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Snap Coupler Bell Hook Spring | 70226514

    Allis-Chalmers Snap Coupler Bell Hook Spring 70226514

    Allis-Chalmers
    $18.75
    70226514
    Allis-Chalmers snap coupler bell hook spring for the listed tractors with quick hitch system.Use the fitment information below to confirm application.Part Number: 70226514FitsAllis-Chalmers...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Seal Rear Axle Out Board of Bull Gear (Axle Hub) 70218284 218284

    Allis-Chalmers Rear Axle Out Board of Bull Gear Seal for D10, D12, D14, D15, WD, WD45

    Allis-Chalmers
    $16.50
    70218284
    Seal for Rear Axle Out Board of Bull Gear (Axle Hub).Part Number: 70218284FitsAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers D14Allis-Chalmers D15Allis-Chalmers WDAllis-Chalmers WD45Replaces /...
    Add to Cart
  • A metal clevis pin and R-clip used for Allis-Chalmers farm tractors, specifically for drawbar hanger cradle. The clevis pin is cylindrical with a hole at one end, showing signs of rust and wear. The R-clip is a shiny, curved metal pin that secures the clevis pin in place.

    Allis-Chalmers Clevis Pin & R-Clip for Drawbar Hanger Cradle

    Allis-Chalmers
    $5.75
    70220873
    Clevis Pin & R-Clip for Drawbar Hanger / Draw Bar Cradle. New set for listed Allis-Chalmers applications.Important fitment notes and measurements are preserved below.Part Number:...
    Add to Cart
  • Allis-Chalmers Delco Rotor Button AB-520D, a metallic electrical component with a rounded rotor button attached to a gold-colored arm, mounted on a black base.

    Delco Rotor Button

    Allis-Chalmers
    $4.00
    AB-520D
    Part Number: AB-520DProduct OverviewDelco rotor button for applications with a Delco clip held cap.FitsAllis Chalmers: B, IB, C, CA, G, RC, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19Avery: A, BF,...
    Add to Cart