Same Day Shipping On 99% Of Orders

Allis Chalmers D12 Tractor Parts

Allis-Chalmers D12 Tractor Parts

About the Allis-Chalmers D12

Allis-Chalmers introduced the D12 in 1959 as part of the new D Series. It was a compact row-crop tractor with a four-cylinder gasoline engine, four-speed transmission, live hydraulics, and a 540-rpm PTO. A D12 High Clearance version was also offered for cultivation work where extra clearance mattered.

The D12 stayed in production through 1968 and went through Series I, Series II, and Series III updates during that run. Early and later tractors can therefore differ in engine parts, air-cleaner parts, electrical equipment, and other details, even when both are called a D12. The serial number is the best starting point when checking parts.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. The engine serial number is on the rear left-hand side of the engine block behind the carburetor.

The table below shows the beginning tractor serial number for each Model D12 year and series:

 

1959-1961
Model D12 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1961 - Series II 3,001
1962-1964
Model D12 year Beginning serial number
1962 - Series II 3,638
1963 - Series II 5,501
1964 - Series II 6,012
1964 - Series III 9,001
1965-1968
Model D12 year Beginning serial number
1965 - Series III 9,192
1966 - Series III 9,508
1967 - Series III 9,830
1968 - Series III 9,979

Total production: About 4,070 Model D12 tractors.

Allis-Chalmers D12 Paint Reference

For restoration planning, the Allis-Chalmers D12 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D12 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers D Series 7/16 inch Snap-In Hole Plug 9563K84, metal hole plug with snap-in design for machinery maintenance and repair.

    Allis-Chalmers D Series 7/16" Snap-In Hole Plug 9563K84

    Allis-Chalmers
    $1.00
    9563K84
    Nickel-plated 7/16" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for headlight switch use.Part Number: 9563K84FitsAllis-Chalmers D Series TractorsSpecsSize: 7/16 inchNotesHeadlight...
  • A brass fuel line compression fitting designed for Allis-Chalmers farm tractors. It connects a 5/16 inch fuel line to a 1/8 inch pipe, suitable for various model tractors.

    Fuel Line Compression Fitting 5/16" Line to 1/8" Pipe - Various Models

    Allis-Chalmers
    $3.75
    516FITTING
    Fuel line compression fitting for various Allis-Chalmers models. Connects 5/16" line to 1/8" pipe and is used on sediment bowls in most applications.Part Number: 516FITTINGFitsAllis Chalmers -...
  • A sediment bowl filter for Allis-Chalmers farm tractors, featuring a tall bowl assembly with a filter element inside. The filter has a metal body, a glass bowl for sediment collection, and a brass shut-off valve at the side. The image notes that the product is for illustrative purposes and the sediment bowl assembly is not included.

    Sediment Bowl Filter for Tall Bowl Assemblies

    Aftermarket
    $12.25
    DJS3039
    Fuel filter only. Sediment bowl not included. This fits our sediment bowl assembly ACR2406 and also fits replacement glass bowl
  • Black-and-white seat-back cushion for an Allis-Chalmers farm tractor, with black vinyl side panels and a white center panel.

    Black & White Seat Back Cushion on Wood - Allis Chalmers

    Allis-Chalmers
    $78.00
    ACR0853
    Black & white vinyl seat back cushion on wood for listed Allis Chalmers models.Part Number: ACR0853FitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210,...
  • Allis-Chalmers Thru Hood Round Body Muffler Allis Chalmers B IB C CA D10 D12 D14 D15

    Allis Chalmers Thru Hood Round Body Muffler

    Allis-Chalmers
    $77.50
    ACR1049
    Thru hood round body muffler for Allis Chalmers tractors.Part Number: ACR1049FitsAllis Chalmers: B, IB, C, CA (1938-1957)Allis Chalmers: D10, D12, D14, D15 Gas (up to sn 9001)Replaces / Cross...
  • Front crankshaft seal for Allis-Chalmers D10, D12, D14, D15, and late WD45 farm tractors; a dark circular seal with a gray inner ring.

    Allis Chalmers Front Crankshaft Seal - D10, D12, D14, D15, Late WD45

    Allis-Chalmers
    $19.00
    70226620
    Allis Chalmers front crankshaft seal for the listed D10, D12, D14, D15, and Late WD45 applications.Part Number: 70226620FitsD10D12D14D15 (up to 9001; 138 & 149 CID Gas)WD45 engine # 45-16650 &...
  • Allis-Chalmers Persian Orange #2 Allis Chalmers Steering Wheel Emblem Front Nose Emblem

    Allis-Chalmers Persian Orange #2 Emblem

    Allis-Chalmers
    $34.00
    A9902
    Persian Orange #2 emblem for select Allis-Chalmers tractors, combines, and lawn and garden models.Part Number: A9902FitsAllis Chalmers: ED40, D10, D12, D14 (sn 19001 and up), D15, D17 (sn 24001 and...
  • Allis-Chalmers 12V Sealed Beam Combo Tail Light Assembly, black round sealed beam tail light with wiring and mounting hardware.

    Allis Chalmers 12V Sealed Beam Combo Tail Light Assembly

    Allis-Chalmers
    $116.75
    AC-355D
    Allis Chalmers 12V sealed beam combo tail light assembly in black with a 4-3/4" diameter.Part Number: AC-355DFitsAllis Chalmers: 190XT (up to SN 19000), D10, D12, D15 (SN 9001 & up), D17 (SN 42001 &...
  • Allis-Chalmers Ignition Switch 4 Position Key Switch

    4 Position Ignition Switch with 2 Keys

    Allis-Chalmers
    $19.75
    AB-400D
    4-position ignition switch for AG and light industrial equipment.Includes 2 keys.Part Number: AB-400DFitsAllis ChalmersAveryCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonMassey...
  • Allis-Chalmers 12 Volt Bullet Tail Light, compact silver and red automotive lighting with mounting bolt and wiring for tractor or vehicle tail light.

    Allis-Chalmers 12 Volt Bullet Tail Light

    Allis-Chalmers
    $47.75
    AC-264V12D
    12 volt bullet tail light for select Allis-Chalmers tractors. It includes a 12-volt bulb and a red glass lens.Part Number: AC-264V12DFitsAllis Chalmers: B, C, CA, G, WD, WD45, D10 (up to sn 9001),...
  • Allis-Chalmers Allis Chalmers Black Steering Wheel ED40 D10 D12 D14 D15 D17 D19 D21

    Allis Chalmers Black Steering Wheel

    Allis-Chalmers
    $57.50
    AC-134D
    Black steering wheel for listed Allis-Chalmers tractors and combines. Like original and made with all new material.Part Number: AC-134DFitsAllis Chalmers - ED40, D10, D12, D14 (sn 19001 and up), D15,...
  • Allis-Chalmers 4-3/4 Smooth Glass Lens w/Guide Name

    4-3/4" Smooth Glass Lens with Guide Name

    Allis-Chalmers
    $15.50
    AB-388D
    4-3/4" smooth glass lens with a raised guide logo and raised part number cross reference abc388.Part Number: AB-388DFitsAllis Chalmers: B, IB, C, CA, D10, D12, D14, D15 (up to SN 9001), WC, WD, WD45,...
  • Allis-Chalmers Thermostat 160 Degrees for Allis-Chalmers and More, gold-colored thermostatic valve with a conical top and circular base.

    Thermostat 160 Degrees for Allis-Chalmers and More

    Allis-Chalmers
    $39.75
    IH-913D
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter.Fits the listed tractor applications below.Part Number: IH-913DFitsAllis Chalmers: B (Engine SN: 126210 & up when equipped with...
  • A gasket designed for the back housing to transmission of Allis-Chalmers farm tractors. It is a flat, irregularly rounded shape with multiple bolt holes around the perimeter.

    Back Housing to Transmission Gasket

    Allis-Chalmers
    $14.25
    70225385
    Part Number: 70225385Back Housing to Transmission GasketBack housing to transmission gasket for listed Allis-Chalmers tractors.FitsAllis-Chalmers CAAllis-Chalmers BAllis-Chalmers CAllis-Chalmers...
  • Allis-Chalmers Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey, representing a shiny, round metal fuel cap with a textured edge.

    Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey

    Allis-Chalmers
    $13.00
    AB-003D
    Chrome fuel cap with gasket and vented design for the listed tractor applications.Part Number: AB-003DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, I-40, I-400, I-60, I-600;...
  • Close-up of a dark metal Allis-Chalmers farm tractor clutch throw-out bearing, a circular component with a wide outer ring and open center, on a white background.

    Clutch Throw Out Bearing (IH Torque Amplifier Release Bearing)

    Allis-Chalmers
    $22.00
    AB-496D
    Clutch throw out bearing, also listed as an IH torque amplifier release bearing. Includes size details and cross references.Part Number: AB-496DFitsAllis Chalmers - 190XT, B, C, CA (W/ 9" Clutch),...
  • A black Flame Thrower Coil with a flame logo in the center, labeled as Pertronix Flame Thrower Coil 40,000 Volts 12V, designed for Allis-Chalmers farm tractors.

    Pertronix Flame Thrower Coil 40,000 Volts 12V

    Pertronix
    $56.50
    ACR3205
    Pertronix Flame Thrower Coil, 40,000 volts, 12V, oil filled, high performance.Heavy duty mount in vertical position. Use with electronic ignition kit.Part Number: ACR3205Specs40,000 volts12VNotesOil...
  • Allis-Chalmers Headlight Assembly 12 Volt  FD-193D

    Headlight Assembly 12 Volt for Allis-Chalmers and Ford

    Allis-Chalmers
    $54.50
    FD-193D
    12 volt headlight assembly for select Allis-Chalmers and Ford models. Mounts to the side of the grille, not the fender. OD is 5-3/4" with a 1/2"-13 stud. Part Number: FD-193D Fits Allis Chalmers:...