Same Day Shipping On 99% Of Orders

Allis Chalmers D12 Tractor Parts

Allis-Chalmers D12 Tractor Parts

About the Allis-Chalmers D12

Allis-Chalmers introduced the D12 in 1959 as part of the new D Series. It was a compact row-crop tractor with a four-cylinder gasoline engine, four-speed transmission, live hydraulics, and a 540-rpm PTO. A D12 High Clearance version was also offered for cultivation work where extra clearance mattered.

The D12 stayed in production through 1968 and went through Series I, Series II, and Series III updates during that run. Early and later tractors can therefore differ in engine parts, air-cleaner parts, electrical equipment, and other details, even when both are called a D12. The serial number is the best starting point when checking parts.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. The engine serial number is on the rear left-hand side of the engine block behind the carburetor.

The table below shows the beginning tractor serial number for each Model D12 year and series:

 

1959-1961
Model D12 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1961 - Series II 3,001
1962-1964
Model D12 year Beginning serial number
1962 - Series II 3,638
1963 - Series II 5,501
1964 - Series II 6,012
1964 - Series III 9,001
1965-1968
Model D12 year Beginning serial number
1965 - Series III 9,192
1966 - Series III 9,508
1967 - Series III 9,830
1968 - Series III 9,979

Total production: About 4,070 Model D12 tractors.

Allis-Chalmers D12 Paint Reference

For restoration planning, the Allis-Chalmers D12 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D12 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers MANIFOLD GASKET Allis Chalmers D10 D12 D14 D15

    Allis Chalmers D10 D12 D14 D15 Manifold Gasket

    Allis-Chalmers
    $9.75
    AC-003GKD
    Manifold gasket for the listed Allis-Chalmers and industrial models.Part Number: AC-003GKDFitsAllis Chalmers D10 Gas (up to sn 9001)Allis Chalmers D12 Gas (up to sn 9001)Allis Chalmers D14 Gas (up to...
  • A two-position push-pull ignition and light switch for an Allis-Chalmers farm tractor, shown isolated on a white background. It has a rectangular metal housing, exposed electrical terminals on top, and a yellow pull knob on a threaded shaft.

    Universal 2 Position Push Pull Ignition Light Switch

    Allis-Chalmers
    $7.50
    SSW2809
    Universal 2 position push/pull switch for ignition or light use. It is non-fused and includes a plastic knob. Part Number: SSW2809 Fits Allis Chalmers - Various Case - Various Cockshutt -...
  • Allis-Chalmers 4409X Sealed Beam Combination Rear Light Bulb 12V

    4409X Sealed Beam Combination Rear Light Bulb 12V

    Allis-Chalmers
    $20.00
    IH-899D
    4-1/2" diameter sealed beam combination rear light bulb for 12V systems. Double contact.Part Number: IH-899DFitsAllis Chalmers: D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200,...
  • Orange and white 19-inch seat cushion pad for an Allis-Chalmers farm tractor, shown on a white background.

    Orange and White Tractor Seat Pad Cushion 19"

    Allis-Chalmers
    $39.50
    YF30WO
    This orange and white tractor seat pad cushion is for tractors with a round pan seat. It fits a 19" to 21" seat pan side to side and uses a drawstring attachment.Part Number: YF30WOFitsAllis Chalmers...
  • Allis-Chalmers Front Wheel Bearing Kit AC-1793D, image of metal bearing rings, rollers, a black rubber seal, and a black felt pad arranged on a white background.

    Allis Chalmers Front Wheel Bearing Kit AC-1793D

    Allis-Chalmers
    $65.75
    AC-1793D
    Allis Chalmers Front Wheel Bearing KitPart number: AC-1793DFront wheel bearing kit for Allis Chalmers tractors with a 5 bolt front hub. Sold individually; 2 used per tractor.FitsWC, WD, WD45, RC (5...
  • Close-up of a silver Allis-Chalmers grille-screen thumb screw with a broad round head and 3/8"-16 threaded shaft.

    Thumb Screw for Grille Screen 3/8"-16

    Allis-Chalmers
    $2.25
    97008A816
    Thumb screw for grille screens on Allis Chalmers D-Series tractors.Used where the thread hole has been enlarged. Oversize 3/8" - 16.Part Number: 97008A816FitsAllis Chalmers D10Allis Chalmers D12Allis...
  • A metallic cylindrical tube with knurled grip at one end and a small hole drilled near the end, designed for Allis-Chalmers farm tractors, product number 70203899.

    Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899

    Allis-Chalmers
    $19.75
    KI1189
    Allis-Chalmers oil filter tube element stand pipe for the listed Allis-Chalmers and AC Misc. applications.Part Number: KI1189FitsAllis Chalmers - G, B, C, CA, IB, RC, WC, WF, WD, WD45, D10, D12, D14,...
  • Bent steel fuel line with brass threaded fittings at both ends, for Allis-Chalmers B, C, CA, D10, and D12 farm tractors.

    Fuel Line Steel for Allis Chalmers B, C, CA, D10, D12

    Allis-Chalmers
    $32.75
    AC-1974D
    Steel fuel line for select Allis-Chalmers tractors.Part Number: AC-1974DFitsAllis Chalmers: B, IB, C, CA, D10, D12Replaces / Cross Reference702072787021547870243108Specs13-1/8" O/A length1/4" tube O...
  • Pertronix 12-volt electronic ignition conversion kit for Allis-Chalmers farm tractors, shown with a circular ignition module plate, red and black wires, terminal connectors, and black rubber components on a white background.

    Electronic Ignition Conversion Kit 12V for Allis Chalmers B, IB, C, CA, D10, D12, D14, D15, D17, G, WC, WD, WD45, WF

    Pertronix
    $191.50
    ACR3189
    Ignitor Delco fits 4-cylinder applications with 12 volt negative ground. This electronic ignition conversion kit replaces points and condenser with a breakerless solid state system. It fits entirely...
  • Allis-Chalmers tractor seat adjustment bolt with a long threaded shaft, a wing nut and washer at one end, and a rounded bolt head at the other.

    Allis Chalmers Seat Adjustment Bolt

    Allis-Chalmers
    $9.00
    SEAT002
    Allis Chalmers seat adjustment bolt with listed replacements for the bolt and wing nut.Part Number: SEAT002FitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200,...
  • Allis-Chalmers BRAKE SHOE LINING SET | Allis Chalmers G D10 D12 D14 D15

    Allis-Chalmers Brake Shoe Lining Set G D10 D12 D14 D15 ACR3538

    Allis-Chalmers
    $25.75
    ACR3538
    Allis-Chalmers Brake Shoe Lining SetFor Allis-Chalmers G, D10, D12, D14, and D15 up to SN 9000. Includes 2 linings with rivets for 1 wheel only.FitsAllis-Chalmers G up to SN 9000Allis-Chalmers D10 up...
  • Allis-Chalmers Economy Zenith Carburetor Repair Kit, image shows gaskets, screws, seals, and other parts for Allis Chalmers WC, WD, WF, B, C, CA, D10, D12 RC tractors.

    Economy Zenith Carburetor Repair Kit for Multiple Tractor Brands

    Allis-Chalmers
    $27.75
    AB-1346D
    Part Number: AB-1346DEconomy Zenith Carburetor Repair Kit Economy repair kit for the specified Zenith replacement carburetor applications listed below. Important: Some applications may vary within...
  • Allis-Chalmers Spark Plugs (Set of 4) - AL295D, close-up of a single spark plug showing its white ceramic insulator and black metal threading.

    Allis-Chalmers Spark Plugs Set of 4 AL295D

    Allis-Chalmers
    $23.00
    AL295D
    OverviewSet of 4 spark plugs for the listed tractor applications. Part Number: AL295D.FitsAllis Chalmers: B, C, CA, D10, D12, D14, D15 (Early), D17 (To Sn# 75000), G, IB, RC, WC, WD, WF, Crawler:...
  • Allis-Chalmers New Water Pump Allis Chalmers B IB C CA RC D10 D12 D14

    Allis-Chalmers Water Pump B C CA D10 D12 D14

    Allis-Chalmers
    $119.50
    AC-227D
    New water pump for Allis-Chalmers tractors. Fits B, IB, C, CA, RC, D10, D12, and D14.The pump has a 3/8" NPT bypass hole which can be plugged if needed.Part Number: AC-227DFitsAllis-Chalmers...
  • A dark, curved metal spring for an Allis-Chalmers Snap Coupler bell hook, part number 70226514, shown against a white background.

    Allis-Chalmers Snap Coupler Bell Hook Spring 70226514

    Allis-Chalmers
    $18.75
    70226514
    Allis-Chalmers snap coupler bell hook spring for the listed tractors with quick hitch system.Use the fitment information below to confirm application.Part Number: 70226514FitsAllis-Chalmers...
  • A metal clevis pin and R-clip used for Allis-Chalmers farm tractors, specifically for drawbar hanger cradle. The clevis pin is cylindrical with a hole at one end, showing signs of rust and wear. The R-clip is a shiny, curved metal pin that secures the clevis pin in place.

    Allis-Chalmers Clevis Pin & R-Clip for Drawbar Hanger Cradle

    Allis-Chalmers
    $5.75
    70220873
    Clevis Pin & R-Clip for Drawbar Hanger / Draw Bar Cradle. New set for listed Allis-Chalmers applications.Important fitment notes and measurements are preserved below.Part Number:...
  • Allis-Chalmers Delco Rotor Button AB-520D, a metallic electrical component with a rounded rotor button attached to a gold-colored arm, mounted on a black base.

    Delco Rotor Button

    Allis-Chalmers
    $4.00
    AB-520D
    Part Number: AB-520DProduct OverviewDelco rotor button for applications with a Delco clip held cap.FitsAllis Chalmers: B, IB, C, CA, G, RC, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19Avery: A, BF,...
  • Close-up of a circular brown-and-black rear axle outboard bull gear seal for Allis-Chalmers D10, D12, D14, D15, WD, and WD45 farm tractors.

    Allis-Chalmers Rear Axle Out Board of Bull Gear Seal for D10, D12, D14, D15, WD, WD45

    Allis-Chalmers
    $16.50
    70218284
    Seal for Rear Axle Out Board of Bull Gear (Axle Hub).Part Number: 70218284FitsAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers D14Allis-Chalmers D15Allis-Chalmers WDAllis-Chalmers WD45Replaces /...