Same Day Shipping On 99% Of Orders

Allis Chalmers D12 Tractor Parts

Allis-Chalmers D12 Tractor Parts

About the Allis-Chalmers D12

Allis-Chalmers introduced the D12 in 1959 as part of the new D Series. It was a compact row-crop tractor with a four-cylinder gasoline engine, four-speed transmission, live hydraulics, and a 540-rpm PTO. A D12 High Clearance version was also offered for cultivation work where extra clearance mattered.

The D12 stayed in production through 1968 and went through Series I, Series II, and Series III updates during that run. Early and later tractors can therefore differ in engine parts, air-cleaner parts, electrical equipment, and other details, even when both are called a D12. The serial number is the best starting point when checking parts.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. The engine serial number is on the rear left-hand side of the engine block behind the carburetor.

The table below shows the beginning tractor serial number for each Model D12 year and series:

 

1959-1961
Model D12 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1961 - Series II 3,001
1962-1964
Model D12 year Beginning serial number
1962 - Series II 3,638
1963 - Series II 5,501
1964 - Series II 6,012
1964 - Series III 9,001
1965-1968
Model D12 year Beginning serial number
1965 - Series III 9,192
1966 - Series III 9,508
1967 - Series III 9,830
1968 - Series III 9,979

Total production: About 4,070 Model D12 tractors.

Allis-Chalmers D12 Paint Reference

For restoration planning, the Allis-Chalmers D12 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D12 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Delco Rotor Button AB-520D, a metallic electrical component with a rounded rotor button attached to a gold-colored arm, mounted on a black base.

    Delco Rotor Button

    Allis-Chalmers
    $4.00
    AB-520D
    Part Number: AB-520DProduct OverviewDelco rotor button for applications with a Delco clip held cap.FitsAllis Chalmers: B, IB, C, CA, G, RC, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19Avery: A, BF,...
  • Allis-Chalmers Allis Chalmers Hydraulic Lever Brake Release Knob

    Allis-Chalmers Hydraulic Lever Brake Release Knob

    Allis-Chalmers
    $5.75
    K52
    Part Number: K52Allis-Chalmers Hydraulic Lever Brake Release KnobHydraulic lever and brake release knob with a 1-1/4" diameter and 3/8"-24 thread.FitsVarious models.SpecsDiameter: 1-1/4"Thread:...
  • Allis-Chalmers Universal 12 Volt Resistor

    Universal 12 Volt Resistor

    Allis-Chalmers
    $9.75
    AB-366D
    Universal 12 volt resistor, 2-terminal style, reduces voltage with 4 ohms of resistance.Part Number: AB-366DFitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational -...
  • A universal 2-position push-pull switch designed for Allis-Chalmers farm tractors, not for automobiles.

    Universal 2 Position Push Pull Switch

    Allis-Chalmers
    $13.50
    DJS398
    Universal 2 position push pull switch for agricultural and light industrial equipment. For ignition switch applications, it can be used only on battery ignition systems.Switch is a 10amp switch with...
  • Allis-Chalmers 12 Volt Bulb for Allis-Chalmers and More, clear glass automotive light bulb with metal base and filament inside.

    12 Volt Bulb for Allis-Chalmers and More

    Allis-Chalmers
    $3.00
    AB-345D
    12 volt bulb for listed tractors and equipment, including Allis-Chalmers, Case, Ford, International, John Deere, Massey Ferguson, Massey Harris, Minneapolis Moline, and Oliver.Part Number:...
  • Allis-Chalmers Fan Belt fits Allis Chalmers B IB C CA D10 D12 D14 70209656

    Allis-Chalmers Fan Belt B IB C CA D10 D12 D14 70209656

    Allis-Chalmers
    $15.75
    AB-009D
    Fan belt for Allis-Chalmers tractors with generators, including the listed B, IB, C, CA, D10, D12, and D14 applications.Cross-reference details and belt size are shown below.Part Number:...
  • Allis-Chalmers Pin, Control Rod Adjuster Allis Chalmers - 70235812

    Pin, Control Rod Adjuster for Allis-Chalmers 70235812

    Allis-Chalmers
    $18.00
    70235812
    Pin, Control Rod Adjuster for Allis-Chalmers tractors and power units.Used for governor, choke, throttle control and as hydraulic hand control depending on tractor model.Part Number:...
  • Allis-Chalmers Allis Chalmers Choke Rod Knob

    Allis-Chalmers Choke Rod Knob K13

    Allis-Chalmers
    $5.50
    K13
    Allis-Chalmers choke rod knob. New part, SKU K13.Use on D-Series tractors using a choke lever rod.Part Number: K13FitsAllis-Chalmers D-Series using choke lever rodSpecsThread: 1/4" - 20Diameter: 1"
  • Allis-Chalmers Thermostat Housing Gasket Allis Chalmers D10 D12 D14 D15 70228125 228125

    Allis Chalmers D10 D12 D14 D15 Thermostat Housing Gasket

    Allis-Chalmers
    $5.75
    70228125
    Part Number: 70228125Product OverviewThermostat housing gasket for the Allis Chalmers models listed below.FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Replaces / Cross...
  • Allis-Chalmers Pushrod (sold individually) Allis Chalmers D10, D12, D14, D15

    Pushrod (sold individually) for Allis Chalmers D10, D12, D14, D15

    Allis-Chalmers
    $27.75
    AC-2410D
    Pushrod sold individually for the listed Allis Chalmers applications. Condition: New.Part Number: AC-2410DFitsAllis Chalmers - D10, D12, D14, D15Industrial - 500, 510, 512, 514, 521, 610, 612, 614,...
  • Allis-Chalmers Zenith Bowl Gasket - Allis Chalmers B, C, WC, WF, WD, D10, D12 - 70223987

    Zenith Bowl Gasket for Allis Chalmers B C WC WF WD D10 D12

    Allis-Chalmers
    $3.00
    70223987
    Zenith Bowl Gasket for select Allis Chalmers tractors.Listed for B, C, WC, WF, WD, D10, and D12 models.Part Number: 70223987FitsBCWCWFWDD10D12Replaces / Cross...
  • Allis-Chalmers Wheel Bearing Sleeve & Seal Kit - Allis Chalmers D10, D12, D14, D15, D17, D19, 160, 170, 175, 180, 185,190, 190XT - 70235120

    Wheel Bearing Sleeve & Seal Kit for Allis Chalmers D10, D12, D14, D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT

    Allis-Chalmers
    $16.75
    70235120
    Wheel Bearing Sleeve & Seal Kit for Allis Chalmers tractors.Part Number: 70235120FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis Chalmers D17Allis Chalmers D19Allis...
  • Allis-Chalmers Universal Alternator Mounting Bracket Kit

    Universal Alternator Mounting Bracket Kit

    Allis-Chalmers
    $44.75
    AB-404D
    Universal alternator mounting bracket kit for switching from a generator to an alternator. May have to be drilled or modified for your application.Part Number: AB-404DFitsAllis...
  • Allis-Chalmers Plastic Knob 70242338, black plastic replacement knob with mounting holes.

    Plastic Knob 70242338

    Allis-Chalmers
    $5.95
    AB-362D
    Plastic knob with the listed tractor applications, size, and cross references below.Part Number: AB-362DFitsAllis Chalmers 190XT (Series III up to SN: 14186 PTO without clutch, throttle lever...
  • Allis-Chalmers Orange Steering Wheel Spinner Knob WSV125OR

    Orange Steering Wheel Spinner Knob

    Allis-Chalmers
    $13.50
    WSV125OR
    Weather-resistant orange steering wheel spinner knob with a sealed ball bearing. Includes a vinyl-coated aluminum knob and 2 brackets for regular and deep spoked wheels.Part Number: WSV125ORFitsAllis...
  • Allis-Chalmers Oil Pressure Gauge Copper Line Kit

    Oil Pressure Gauge Copper Line Kit

    Allis-Chalmers
    $29.75
    AB-523D
    Oil pressure gauge copper line kit for the applications listed below. Includes 6 FT of 1/8" copper line and the fittings listed in the kit contents.Part Number: AB-523DFitsAllis...
  • Image of a gasket for Allis-Chalmers farm tractors, specifically for the governor cover. The gasket is an irregular square with rounded corners and a large central hole, as well as five smaller holes around the perimeter.

    Allis-Chalmers Governor Cover Gasket B C IB CA D10 D12 D14 D15

    Allis-Chalmers
    $5.50
    70233213
    Part Number: 70233213Governor Cover GasketGovernor cover gasket for Allis-Chalmers tractors. Fits the models listed below and replaces the referenced part numbers.FitsAllis-Chalmers BAllis-Chalmers...
  • A metallic steering spindle key for Allis-Chalmers farm tractors, used to secure parts of the front axle steering system, with the product number 70923996.

    Allis-Chalmers Front Axle Steering Spindle Key 70923996

    AGCO
    $19.25
    70923996
    Front axle steering spindle key for select Allis-Chalmers tractors. Preserves the listed dimensions and replacement number for easy matching.Part Number: 70923996FitsAllis-Chalmers D10, D12, D14,...