Same Day Shipping On 99% Of Orders

Allis Chalmers D14 Tractor Parts

About the Allis-Chalmers D14

The D14 opened the Allis-Chalmers D Series in 1957 as a new compact tractor for row-crop and general farm work. Its 149-cubic-inch four-cylinder engine was available for gasoline or LP gas, and the four-speed transmission could be paired with a transfer case for more gear choices. The D14 was equipped with the Power Director hand clutch, which gave the operator live PTO control without stopping the tractor.

Built through 1960, the D14 sits between the older CA and WD-era tractors and the D15 that followed it. The serial number table below can help identify the tractor's year.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left front end of the torque tube. The engine serial number is on the rear left-hand side of the engine, behind the carburetor.

The table below shows the beginning tractor serial number for each Model D14 year:

 

1957-1958
Model D14 year Beginning serial number
1957 1,001
1958 9,400
1959-1959
Model D14 year Beginning serial number
1959 14,900
1960-1960
Model D14 year Beginning serial number
1960 21,800

Total production: 23,050 Model D14 tractors.

Allis-Chalmers D14 Paint Reference

For restoration planning, the Allis-Chalmers D14 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D14 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers D Series 3-3/8 Inch Nickel Plated Hole Plug 71995k86, image showing a metal hole plug with a screw and a mounting bracket.

    Allis Chalmers D Series 3-3/8 Inch Nickel Plated Hole Plug 71995k86

    Allis-Chalmers
    $12.00
    71995k86
    Nickel plated 3-3/8 inch snap-in hole plug for Allis Chalmers D Series tractors.Part Number: 71995k86FitsAllis Chalmers D Series TractorsSpecs3-3/8 inchNotesTachometer gauge hole.
  • Allis-Chalmers Tractor Toolbox Primered, orange metal toolbox for tractor tools and accessories.

    Allis Chalmers Tractor Toolbox Primered

    Allis-Chalmers
    $62.25
    ACR2465
    Primered toolbox for select Allis Chalmers tractors.Features a piano style hinge and is listed with the dimensions below.Part Number: ACR2465FitsAllis Chalmers WDAllis Chalmers WD45Allis Chalmers D10...
  • Allis-Chalmers Starter Drive Housing for D14, D15, H3 tractors, black and metallic component used for engine starter assembly.

    Starter Drive Housing for Allis Chalmers D14, D15, H3

    Allis-Chalmers
    $149.75
    AC-1269D
    Starter drive housing for select Allis Chalmers models with a factory 12 volt starter.Part Number: AC-1269DFitsAllis Chalmers D14 (Gas / LP, sn 19001 & up)Allis Chalmers D15 (Gas / LP)Allis Chalmers...
  • Allis-Chalmers TRIPLE RIB 6 PLY TIRE - 5.00 X 15 6 PLY

    Triple Rib 6 Ply Tire 5.00 x 15 for Allis-Chalmers

    Allis-Chalmers
    $99.75
    WH-052D
    Triple rib 6 ply tire sized 5.00 x 15. Tire only and for 3 x 15 wheel, with fitment listed for multiple tractor brands.Part Number: WH-052DFitsAllis ChalmersAveryCaseCockshuttIH / FarmallJohn...
  • Valve train kit for Allis-Chalmers D10, D12, D14, D15, and H3 farm tractors, arranged in four groups. The kit includes eight long metal valves, eight dark coil springs, and eight cylindrical metal valve guides.

    Valve Train Kit for Allis Chalmers D10 D12 D14 D15 H3

    Allis-Chalmers
    $124.75
    AC-2129D-003
    Valve train kit for listed Allis Chalmers tractors. Includes valve keepers, guides, springs, exhaust valves, and intake valves.Part Number: AC-2129D-003FitsB, C, IB, RC (Engine Serial No. CE161057...
  • Allis-Chalmers D10 D12 D14 Air Cleaner Oil Cup, blue cylindrical oil cup for air cleaner of Allis-Chalmers tractors.

    Allis Chalmers D10 D12 D14 Air Cleaner Oil Cup

    Allis-Chalmers
    $17.75
    FD-034D
    Air cleaner oil cup for Allis Chalmers D10, D12 and D14 applications, with listed fits across Case, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver.The cup is for air...
  • Allis-Chalmers STRAIGHT CHROME EXHAUST STACK | Allis Chalmers B IB C CA RC D10 D12 D14 D15

    Allis Chalmers Straight Chrome Exhaust Stack B IB C CA RC D10 D12 D14 D15

    Allis-Chalmers
    $199.75
    AC-230D
    Straight chrome exhaust stack for Allis Chalmers tractors with mufflers thru hood applications.Use Raincap RC-015D (Chrome Plated). USA Made.Part Number: AC-230DFitsBIBCCARCD10D12D14D15 (up to sn...
  • Round 9-inch clutch disc for Allis-Chalmers farm tractors, shown face-on with a dark friction surface, segmented riveted lining, and a 10-spline center hub.

    Clutch Disc 9 in. 10 Spline for Allis Chalmers B, C, CA, D10, D12, D14, D15

    Allis-Chalmers
    $62.75
    70207784
    9" O.D. 10 Spline Rigid Drive Disc for Allis Chalmers tractors and crawlers.Part Number: 70207784FitsAllis Chalmers BAllis Chalmers CAllis Chalmers CAAllis Chalmers D10Allis Chalmers D12Allis...
  • Allis-Chalmers 6 Volt External Voltage Regulator for Allis Chalmers, Case, JD, MF, black rectangular device with mounting brackets and screws.

    6 Volt External Voltage Regulator for Allis Chalmers, Case, JD, MF

    Allis-Chalmers
    $39.75
    AB-152D
    6 volt external voltage regulator. For ‘A’ type circuits in positive ground systems. Flat base for mounting. Condition: New.Fits Delco generators: 1100509, 1101404, 1100025, 1100055, 1100501,...
  • A spring-loaded clutch disc designed for Allis-Chalmers farm tractors, specifically for models B, C, and CA. The disc features a circular metal hub with splines for attachment, surrounded by a friction surface with multiple segments and gold-colored rivets or fasteners.

    9" 10 Spline Spring Loaded Clutch Disc for Allis Chalmers B, C, CA

    Allis-Chalmers
    $161.50
    70231976
    9" 10 spline spring loaded clutch disc for listed Allis Chalmers applications. New part.Part Number: 70231976FitsAllis Chalmers BAllis Chalmers CAllis Chalmers CAAllis Chalmers D10 (Up to SN...
  • Allis-Chalmers Comfort Classic Vinyl Seat Assembly, black cushioned tractor or machinery seat with armrests.

    Allis Chalmers Comfort Classic Vinyl Seat Assembly

    Allis-Chalmers
    $665.00
    DJS7025
    Allis Chalmers Comfort Classic Seat Assembly (VINYL)Part Number: DJS7025FitsD10, D12, D14, D15, D17, D19, D21170, 175, 180, 185, 190, 190 XT, 190 XT III200, 210, 220, 220 FWA7000, 7010, 7020, 7030,...
  • Three pairs of curved metal main bearing shells for an Allis-Chalmers farm tractor, arranged against a white background.

    Standard Main Bearing Set (Set of 3) for Allis-Chalmers D10, D12, D14, D15

    Allis-Chalmers
    $199.75
    AC-1954D
    Standard main bearing set for Allis-Chalmers applications listed below. Set of 3. For 2.749 standard main journal.Part Number: AC-1954DFitsAllis Chalmers - D10, D12, D14, D15, I40, I400, I60 (all...
  • Allis-Chalmers Wiring Harness Kit for Allis-Chalmers D14, D15 Series I, coiled electrical wiring harness with multiple color-coded wires and connectors.

    Wiring Harness Kit for Allis-Chalmers D14, D15 Series I

    Allis-Chalmers
    $259.50
    AC-2260D
    Wiring harness kit for Allis-Chalmers D14 and D15 Series I gas tractors.For 6 or 12 volt generator systems only. Exactly like original, with headlight wires and wiring instructions included.Part...
  • Image of a black gasket designed for Allis-Chalmers farm tractors' oil pump body to cylinder block connection.

    Allis-Chalmers Oil Pump Body to Cylinder Block Gasket

    Allis-Chalmers
    $5.00
    70277273
    Oil Pump Body To Cylinder Block Gasket. New gasket for the listed Allis-Chalmers applications.Part Number: 70277273FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers...
  • A J-Style Battery Hold Down Kit for Allis-Chalmers farm tractors, specifically for models D14, D15, D17, and D19. The kit includes two long metal rods with hooks on the ends, two round rubber pads, and two small metal brackets.

    J-Style Battery Hold Down Kit for Allis-Chalmers D14 D15 D17 D19

    Allis-Chalmers
    $6.75
    DJS721
    Part Number: DJS721J-Style Battery Hold Down KitUse this J-style battery hold down kit for the listed Allis-Chalmers tractors. It measures 10 inches long.FitsAllis-Chalmers D14Allis-Chalmers...
  • Aftermarket Top Link, industrial mechanical linkage component for heavy machinery or agricultural equipment, shown with a rod and mounting eye

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT...
  • A wiring harness kit with multiple color-coded wires and connectors, designed for Allis-Chalmers D14 D15 Series I farm tractors.

    Wiring Harness Kit for Allis Chalmers D14 D15 Series I

    Allis-Chalmers
    $259.50
    DJS1030
    Wiring Harness Kit for tractors with a 1-wire alternator.Part Number: DJS1030FitsAllis Chalmers D14Allis Chalmers D15 Series INotesComplete wiring harness kit.For tractors with a 1-wire alternator.