ALLIS CHALMERS D15 PARTS

The Allis-Chalmers D15, introduced in 1960, was a versatile and powerful tractor designed to serve a wide range of farming needs. The D15 came in two distinct series: Series I and Series II, each with notable improvements and features. Series I, produced from 1960 to 1962, featured a four-cylinder engine with options for both gas and diesel fuel. The gas engine delivered about 41 horsepower, while the diesel version provided around 38 horsepower. This range of power made the D15 suitable for a variety of tasks, from plowing and cultivating to mowing and hauling.

In 1963, Allis-Chalmers introduced Series II, which remained in production until 1968. This series included several enhancements, such as an increased compression ratio in the gas engine, boosting its output to approximately 46 horsepower, and improved hydraulics for better performance with attachments. The diesel engine also saw improvements in efficiency and durability. Both series featured a refined Power Director transmission, which allowed for smoother shifting and greater control over different speeds and operations. The Allis-Chalmers D15, with its combination of power, versatility, and innovative features, became a popular choice among farmers and remains a favorite among vintage tractor enthusiasts today.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers RAINCAP 2-1/2" OD Zinc-PLATED

    RAINCAP 2-1/2 in OD Zinc-Plated

    Allis-Chalmers
    $34.50
    RC-014D
    RAINCAP with 2-1/2" OD zinc-plated construction.Fits straight chrome pipe applications.Part Number: RC-014DFitsAllis ChalmersFordIH / FarmallJohn DeereStraight chrome pipeSpecs2-1/2" ODZinc-plated
  • Allis-Chalmers Battery Cable 19" (Non-Insulated) AB-421D, image of a braided metal battery cable with eyelet terminals in a close-up view.

    Battery Cable 19 in Non-Insulated AB-421D

    Allis-Chalmers
    $24.75
    AB-421D
    Battery Cable 19" Non-Insulated AB-421DHeavy duty ground cable. This non-insulated battery cable is 19" long, 2 gauge, and uses straight terminals with a 3/8" eyelet opening.FitsAllis Chalmers - variousCase - variousCockshutt - variousFord -...
  • Allis-Chalmers 21 Teeth Gear, Reverse Idler - Allis Chalmers CA, D10, D12, D14, D15 - 70232498

    Allis Chalmers 21 Teeth Gear, Reverse Idler

    Allis-Chalmers
    $179.00
    70232498
    21 Teeth Gear, Reverse Idler for Allis-Chalmers CA, D10, D12, D14, and D15 applications.Part Number: 70232498FitsAllis Chalmers CAAllis Chalmers D10 (SN 3501 and up)Allis Chalmers D12 (SN 3001 and up)Allis Chalmers D14 (SN 19001 and up)Allis Chalmers...
  • Allis-Chalmers Brake Lock Lever Spring Allis Chalmers 70230364

    Brake Lock Lever Spring for Allis Chalmers D10 D12 D14 D15 D17 170 175

    Allis-Chalmers
    $9.75
    70230364
    Brake lock lever spring for select Allis Chalmers tractors and hydraulic remote adjustment rod applications. Part Number: 70230364Fits Allis Chalmers D10 Allis Chalmers D12 Allis Chalmers D14 Allis Chalmers D15 Allis Chalmers D17 Allis Chalmers...
  • Allis-Chalmers Category 1, Top Link

    Category 1 Top Link for Allis Chalmers and Various Models

    Allis-Chalmers
    $28.00
    FD-023D
    Category 1, Top LinkCat 1 top link with broad model application across multiple tractor brands.Part Number: FD-023DFitsAGCO Tractor: 4650 and other models using CAT 1 three point hitchAllis Chalmers: D10, D12, D14, D15, ED40, I40, I400, I60, I600, 160,...
  • Allis-Chalmers Allis Chalmers 3 Point Lower Lift Arm HD D10, D12, D15

    Allis Chalmers 3 Point Lower Lift Arm Heavy Duty D10, D12, D15

    Allis-Chalmers
    $78.95
    3013-1633
    Heavy Duty 3 Point Lower Lift Arm for Allis Chalmers D10, D12, and D15. Requires 2 per tractor.Part Number: 3013-1633FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D15Other models with Category 1SpecsCategory 17/8" diameter31-3/4" center to...
  • Allis-Chalmers 3-3/8" Hole Plug "Nickel Plated" - 71995k86

    Allis Chalmers D Series 3-3/8 Inch Nickel Plated Hole Plug 71995k86

    Allis-Chalmers
    $12.00
    71995k86
    Nickel plated 3-3/8 inch snap-in hole plug for Allis Chalmers D Series tractors.Part Number: 71995k86FitsAllis Chalmers D Series TractorsSpecs3-3/8 inchNotesTachometer gauge hole.
  • Allis-Chalmers TOOLBOX Allis Chalmers WD WD45 D10 D12 D14 D15 D17 Primered

    Allis Chalmers Tractor Toolbox Primered

    Allis-Chalmers
    $62.25
    ACR2465
    Primered toolbox for select Allis Chalmers tractors.Features a piano style hinge and is listed with the dimensions below.Part Number: ACR2465FitsAllis Chalmers WDAllis Chalmers WD45Allis Chalmers D10 (up to sn 9001)Allis Chalmers D12 (up to sn 9001)Allis...
  • Allis-Chalmers Allis Chalmers D15 Series II Piston Sleeve Sealing O Rings 70237647

    Allis-Chalmers D15 Series II Piston Sleeve Sealing O-Rings

    Allis-Chalmers
    $20.75
    70237647
    Allis Chalmers - D15 Series II (SN 9001 & up; 160 cu/in)Part Number: 70237647Replaces / Cross Reference70237647NotesKit contains 2 sleeve sealing O-rings. Sold per cylinder.
  • Allis-Chalmers Allis Chalmers Starter Drive Housing D14 D15 H3

    Starter Drive Housing for Allis Chalmers D14, D15, H3

    Allis-Chalmers
    $149.75
    AC-1269D
    Starter drive housing for select Allis Chalmers models with a factory 12 volt starter.Part Number: AC-1269DFitsAllis Chalmers D14 (Gas / LP, sn 19001 & up)Allis Chalmers D15 (Gas / LP)Allis Chalmers H3 (Gas / LP)Replaces / Cross...
  • Allis-Chalmers Clutch Disc 9" 10 Spline - Allis Chalmers B, C, CA, D10, D12, D14, D15 - 70207784

    Clutch Disc 9 in. 10 Spline for Allis Chalmers B, C, CA, D10, D12, D14, D15

    Allis-Chalmers
    $62.75
    70207784
    9" O.D. 10 Spline Rigid Drive Disc for Allis Chalmers tractors and crawlers.Part Number: 70207784FitsAllis Chalmers BAllis Chalmers CAllis Chalmers CAAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis Chalmers HD3 CRAWLERAllis...
  • Allis-Chalmers 9" 10 Spline Spring Loaded Clutch Disc - Allis Chalmers B, C, CA, D10, D12, D14, D15 - 70231976

    9" 10 Spline Spring Loaded Clutch Disc for Allis Chalmers B, C, CA

    Allis-Chalmers
    $161.50
    70231976
    9" 10 spline spring loaded clutch disc for listed Allis Chalmers applications. New part.Part Number: 70231976FitsAllis Chalmers BAllis Chalmers CAllis Chalmers CAAllis Chalmers D10 (Up to SN 3501)Allis Chalmers D12 (Up to SN 3000)Allis Chalmers...
  • Allis-Chalmers STRAIGHT CHROME EXHAUST STACK | Allis Chalmers B IB C CA RC D10 D12 D14 D15

    Allis Chalmers Straight Chrome Exhaust Stack B IB C CA RC D10 D12 D14 D15

    Allis-Chalmers
    $199.75
    AC-230D
    Straight chrome exhaust stack for Allis Chalmers tractors with mufflers thru hood applications.Use Raincap RC-015D (Chrome Plated). USA Made.Part Number: AC-230DFitsBIBCCARCD10D12D14D15 (up to sn 9001)all w/ mufflers thru hoodSpecsStraight PipeDouble...
  • Allis-Chalmers Standard Main Bearing Set (Set Of 3) - Allis Chalmers D10 D12 D14 D15

    Standard Main Bearing Set (Set of 3) for Allis-Chalmers

    Allis-Chalmers
    $199.75
    AC-1954D
    Standard main bearing set for Allis-Chalmers applications listed below. Set of 3. For 2.749 standard main journal.Part Number: AC-1954DFitsAllis Chalmers - D10, D12, D14, D15, I40, I400, I60 (all 4-cylinder 138, 149, 160 C.I. gas or LP)Forklift: 500,...
  • Allis-Chalmers TRIPLE RIB 6 PLY TIRE - 5.00 X 15 6 PLY

    Triple Rib 6 Ply Tire 5.00 x 15 for Allis-Chalmers

    Allis-Chalmers
    $99.75
    WH-052D
    Triple rib 6 ply tire sized 5.00 x 15. Tire only and for 3 x 15 wheel, with fitment listed for multiple tractor brands.Part Number: WH-052DFitsAllis ChalmersAveryCaseCockshuttIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliverReplaces / Cross...
  • Allis-Chalmers Wiring Harness Kit | Allis Chalmers D14 D15 Series I

    Wiring Harness Kit for Allis-Chalmers D14, D15 Series I

    Allis-Chalmers
    $259.50
    AC-2260D
    Wiring harness kit for Allis-Chalmers D14 and D15 Series I gas tractors.For 6 or 12 volt generator systems only. Exactly like original, with headlight wires and wiring instructions included.Part Number: AC-2260DFitsAllis Chalmers D14Allis Chalmers D15...
  • Allis-Chalmers Allis Chalmers Comfort Classic Seat Assembly (Vinyl)

    Allis Chalmers Comfort Classic Vinyl Seat Assembly

    Allis-Chalmers
    $665.00
    DJS7025
    Allis Chalmers Comfort Classic Seat Assembly (VINYL)Part Number: DJS7025FitsD10, D12, D14, D15, D17, D19, D21170, 175, 180, 185, 190, 190 XT, 190 XT III200, 210, 220, 220 FWA7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580Replaces / Cross...
  • Allis-Chalmers J - STYLE BATTERY HOLD DOWN KIT DJS721

    J-Style Battery Hold Down Kit for Allis-Chalmers D14 D15 D17 D19

    Allis-Chalmers
    $6.75
    DJS721
    Part Number: DJS721J-Style Battery Hold Down KitUse this J-style battery hold down kit for the listed Allis-Chalmers tractors. It measures 10 inches long.FitsAllis-Chalmers D14Allis-Chalmers D15Allis-Chalmers D17Allis-Chalmers D19Specs10 inches long
  • Aftermarket TOP LINK, CATEGORY 2 - FD-346D

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT HITCHCase: 730, 830, 930, 1030, 770, 870, 970, 1070,...
  • Allis-Chalmers Wiring Harness Kit (Tractors with 1 Wire Alternator)  Allis Chalmers D14 D15 Series I

    Wiring Harness Kit for Allis Chalmers D14 D15 Series I

    Allis-Chalmers
    $259.50
    DJS1030
    Wiring Harness Kit for tractors with a 1-wire alternator.Part Number: DJS1030FitsAllis Chalmers D14Allis Chalmers D15 Series INotesComplete wiring harness kit.For tractors with a 1-wire alternator.